Reviews Shock Absorber Bushing Tool

Oil Pressure Shock Absorber, Black M14 x 20mm Stroke for Pneumatic Air Cylinder AC1420-2

  • 【SELF-PRESSURE-REGULATION】M14 air cylinder shock absorber has a soft shock absorbing effect because the self-pressure-regulation function..
  • 【REDUCE SHOCK &NOISE】Industrial shock absorber can reduce shock and noise,improve the stability in automated mechanical operations, enhance working efficiency..
  • 【RESET PISTON ROD FAST】The spring inside can reset the piston rod fast cause the perfect movement of the check valve..
  • 【HIGH QUALITY】Shell is made of high quality alloy and stainless steel, good damping, high hardness and strong heat resistance..
  • 【OIL PRESSURE SHOCK ABSORBER】Length: Approx. 12.6cm / 4.96inch, Thread: M14, Stroke: 20mm, Allowable speed: 0.8-3m/s..
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4×4 shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

  • Perfect compatibility—–The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials—The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set—2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality—CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note—There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4×4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 shocks Rustler 4X4 shocks Stampede 4X4 shocks Hoss 4X4 Replace 5862 (Blue)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 Upgrade Parts RC Car Replace 5862 (Titanium Color)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

DEF Door Bushing Removal Tool Hinge Liners for Wrangler JK JKU JL JLU Gladiator JT 2007-2021 (Removal Tool and 2 Pins)

  • Fit: Door Bushing Removal Tool for Wrangler JK JL 4 Door 2008-2019 ..
  • Material: Made of stainless steel, great performance and repeated use are guaranteed. High quality bushings never rust .The inserts are made of plastic..
  • Function: These door pin guides help you line up your door pins and put your doors back easily. The door bushing removal tool helps to disassemble your Wrangler corrosive hinges..
  • Usage: By using the door pin guides align the top cap and lower the door so that the bottom is in place. By using a hammer, to tap the door bushing removal tool until the OE liners are totally disassembled. If you find that it is not suitable for your car，use some type of grease or lube for the new bushings and use a rubber mallet to get them in place. Maybe it works well..
  • Package include: 1 silver door bushing removal tool, 8 bushings and 2 Pins.Door Bushing Removal Tool did not fit TJ.
Check Stock

aiNPCde Downhill Bicycle Shock Absorber MTB 125mm (5") 150mm (6") 165mm (6.5") 190mm (7.5") Mountain Bike Rear Steel Coil Spring Shock (2pcs) (Color : 190mm(7.5"), Size : 350 Lb)

  • Product: Downhill Bicycle Shock Absorber, Steel Coil Spring (2 pcs).
  • Bushing length is: 24 mm, inner diameter of eye is: 8mm.
  • Size: 125mm (5"), 150mm (6"), 165mm (6.5"), 190mm (7.5").
  • Applicable: electric bikes, MTB, Scooter, Folding, XC Soft tail, Bicycle.
  • COMMITENT: You can buy with confidence. If the product has any quality problems, contact us, we will definitely provide you with an effective solution..
Check Stock

GZYF 13.5' 340mm Universal Motorcycle Rear Shock Absorbers Suspension Fit Honda Suzuki Kawasaki Yamaha ATV Go Kart Quad Dirt Sport Bikes,Black Silver

  • A Pair of Round Hole 340mm Aluminum and Solid Steel Shock Absorber.
  • Pressure can be adjusted by springs or air (nitrogen).
  • Operation of the coil-over springs and air cylinder is helpful to reduce the shock..
  • Shock Absorber bottom/ends type: Round End.
  • No instruction included, professional installation recommended..
  • Universal fit for most 340mm Motorcycle Shock Absorber For Honda/Yamaha/Suzuki/Kawasaki.
  • Dirt bikes, Gokart, ATV, Motorcycles and Quad..
Check Stock

DNM Burner-RCP 2S Downhill Mountain Bike Bicycle Rear Shock 550lbs 220x66mm

  • CAUTION: PLEASE DOUBLE CHECK YOUR SHOCK EYE TO EYE DISTANCE AND THE BUSHING SIZE BEFORE MAKE A PURCHASE. Eye to Eye:220mm × 66mm Travel (8.66×2.6in).
  • Dark hard-anodized AL-7075 shock body, Damper shaft：Hard chromed shock Ø 12 mm ( 0.47 inch ) shaft, Bushing size: Front Rear 24mm x 8mm (0.95x0.31in).
  • Spring: Coil Spring, Intended use: AM FR DH.
  • Include additional Bushing Hardware 50x8mm(1.97x0.31in) as picture.
  • Weight: 1016g=2.24lbs, Spring Rate: 550lbs, Damping: 4-system, Adjustments: Rebound / Compression / Preload / Adjust High Pressure/Big impact.
Check Stock

DNM Burner-RCP 2S Downhill Mountain Bike Bicycle Rear Shock 550lbs 190x51mm

  • CAUTION: PLEASE DOUBLE CHECK YOUR SHOCK EYE TO EYE DISTANCE AND THE BUSHING SIZE BEFORE MAKE A PURCHASE. Eye to Eye:190mm × 51mm Travel (7.48×2.01in).
  • Dark hard-anodized AL-7075 shock body, Damper shaft：Hard chromed shock Ø 12 mm ( 0.47 inch ) shaft, Bushing size: Front Rear 24mm x 8mm (0.95x0.31in).
  • Spring: Coil Spring, Intended use: AM FR DH.
  • Include additional Bushing Hardware 50x8mm(1.97x0.31in) as picture.
  • Weight: 1016g=2.24lbs, Spring Rate: 550lbs, Damping: 4-system, Adjustments: Rebound / Compression / Preload / Adjust High Pressure/Big impact.
Check Stock