Reviews Shock Absorber Bushing Installer

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4×4 shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

  • Perfect compatibility—–The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials—The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set—2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality—CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note—There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4×4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 shocks Rustler 4X4 shocks Stampede 4X4 shocks Hoss 4X4 Replace 5862 (Blue)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 Upgrade Parts RC Car Replace 5862 (Titanium Color)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

aiNPCde Downhill Bicycle Shock Absorber MTB 125mm (5") 150mm (6") 165mm (6.5") 190mm (7.5") Mountain Bike Rear Steel Coil Spring Shock (2pcs) (Color : 190mm(7.5"), Size : 350 Lb)

  • Product: Downhill Bicycle Shock Absorber, Steel Coil Spring (2 pcs).
  • Bushing length is: 24 mm, inner diameter of eye is: 8mm.
  • Size: 125mm (5"), 150mm (6"), 165mm (6.5"), 190mm (7.5").
  • Applicable: electric bikes, MTB, Scooter, Folding, XC Soft tail, Bicycle.
  • COMMITENT: You can buy with confidence. If the product has any quality problems, contact us, we will definitely provide you with an effective solution..
Check Stock

GZYF 13.5' 340mm Universal Motorcycle Rear Shock Absorbers Suspension Fit Honda Suzuki Kawasaki Yamaha ATV Go Kart Quad Dirt Sport Bikes,Black Silver

  • A Pair of Round Hole 340mm Aluminum and Solid Steel Shock Absorber.
  • Pressure can be adjusted by springs or air (nitrogen).
  • Operation of the coil-over springs and air cylinder is helpful to reduce the shock..
  • Shock Absorber bottom/ends type: Round End.
  • No instruction included, professional installation recommended..
  • Universal fit for most 340mm Motorcycle Shock Absorber For Honda/Yamaha/Suzuki/Kawasaki.
  • Dirt bikes, Gokart, ATV, Motorcycles and Quad..
Check Stock

DNM Burner-RCP 2S Downhill Mountain Bike Bicycle Rear Shock 550lbs 220x66mm

  • CAUTION: PLEASE DOUBLE CHECK YOUR SHOCK EYE TO EYE DISTANCE AND THE BUSHING SIZE BEFORE MAKE A PURCHASE. Eye to Eye:220mm × 66mm Travel (8.66×2.6in).
  • Dark hard-anodized AL-7075 shock body, Damper shaft：Hard chromed shock Ø 12 mm ( 0.47 inch ) shaft, Bushing size: Front Rear 24mm x 8mm (0.95x0.31in).
  • Spring: Coil Spring, Intended use: AM FR DH.
  • Include additional Bushing Hardware 50x8mm(1.97x0.31in) as picture.
  • Weight: 1016g=2.24lbs, Spring Rate: 550lbs, Damping: 4-system, Adjustments: Rebound / Compression / Preload / Adjust High Pressure/Big impact.
Check Stock

DNM Burner-RCP 2S Downhill Mountain Bike Bicycle Rear Shock 550lbs 190x51mm

  • CAUTION: PLEASE DOUBLE CHECK YOUR SHOCK EYE TO EYE DISTANCE AND THE BUSHING SIZE BEFORE MAKE A PURCHASE. Eye to Eye:190mm × 51mm Travel (7.48×2.01in).
  • Dark hard-anodized AL-7075 shock body, Damper shaft：Hard chromed shock Ø 12 mm ( 0.47 inch ) shaft, Bushing size: Front Rear 24mm x 8mm (0.95x0.31in).
  • Spring: Coil Spring, Intended use: AM FR DH.
  • Include additional Bushing Hardware 50x8mm(1.97x0.31in) as picture.
  • Weight: 1016g=2.24lbs, Spring Rate: 550lbs, Damping: 4-system, Adjustments: Rebound / Compression / Preload / Adjust High Pressure/Big impact.
Check Stock

M8 8mm Rear Shock Extender Absorbers Universal Motorcycle Riser Heightening Adapter High Damping Device Thicken Pad Chassis Extender Taper Riser With Screws(Black)

  • 【Fitment】Fit for all M8 Shock Absorber,shock absorbers with a diameter of 8mm.If the shock absorber of your is half-thread screw(the front thread diameter is 10mm,the rear thread diameter is 12mm),please enlarge the screw hole by yourself to install it.Aluminum shock absorber height extension riser is universal for / Pit Dirt Bike /ATV / Quad etc.Please confirm the size before buy it..
  • 【Material】Constructed of high-strength machined aluminum alloy, rigid and durable.Excellent processing performance, good corrosion resistance, no deformation after long time use..
  • 【Function】It can increase by 30~50mm,brilliant height extension effect for damping protection, makes the vehicle easy to hold traction on the steep hill.Buy it and maximize driving pleasure without overloading your body.Easy and fast to install with simplify structure, perfect replacement for your old or broken..
  • 【Package】1 Pair Shock Absorber Riser Extenders +1 Pair M8 Screws.Our design team has equipped the set with a screw for easy operation.Screw hole diameter: Approx. 8mm/0.314in.Not only increases the ride comfort, but also the easy assembly and disassembly..
Check Stock

Futchoy Front Wheel Hub+Steering Knuckle Spindle+Brake Caliper For ATV Go Kart Dirt Bike 125cc-250cc ATV 4 Wheeler Go Kart

  • Reference Size: Eye Center to Center Distance is about 215mm/8.46inch. Mounting Hole Diameter is about 8mm/0.3inch..
  • For 2 Stroke: This 215mm shock damper spring is suitable for 2 stroke quads, buggies, some pit bikes, mountain bike, bicycle, folding bike and more..
  • High Quality Material: This shock absorber is made of high-quality steel material, precision parts, sturdy and durable..
  • Main Function: Shock Adjustable Damper, shock strut has anti-oxidation and wear resistance, adjustable spring pressure, and a maximum load acity of 2000lbs, which can be improved according to your own riding experience to meet your needs on modified vehicles..
  • Easy to Install: Shock Absorber overall replacement parts are easy to install without any modification or drilling, easy to use, original worn shock absorber can be removed and installed directly, saving your time and energy..
Check Stock