Reviews Welding Joint Clamps

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

EVIL ENERGY Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.25 Inch,2Pcs

  • Size: Joins 2.25" OD pipe to 2.25" OD pipe, width of strap: 3inch /76.2mm..
  • Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair..
  • Advantages: No welding design, easy to install or remove..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m..
Check Stock

Poweka CV Joint Boot Clamp Pliers with CV Boot Clamps Kit, Auto Repair Tool for Car Tire Repair Clamp Removal - Car Banding/band Tool Kit, Automotive Hose Axle Plier

  • This set contains both a CV joint clamp banding tool and CV boot clamp pliers, which are designed for fast and simple tensioning and securing of CV boot banding strap..
  • Joint clamp banding tool: an effective tool for installing CV clamps. The banding tool works with the installers ratchet and 1/2" socket or uses the provided lever to tension the clamp..
  • CV boot clamp pliers:This device crimps and flattens ear-type clamps found on CV joint boots, and installs quick clamps on the fuel filter and cooling system hoses..
  • With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. Pliers with jaws and formed handles for comfort, less user fatigue, and more productivity..
  • Made from high grade metal and plastic, with high hardness, long lasting. Package included: 1Pcs CV Clamp Tool, 1Pcs CV Joint Boot Clamp Pliers, 4Pcs Small CV Boot Clamps, 4 Pcs Large CV Boot Clamps..
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

  • HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
  • MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
  • EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
  • PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
  • WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..
Check Stock

2pcs CV Joint Boot Clamp Pliers Set Hose Band Cut-off Pliers Car Banding Tool Kit

  • Material – Pliers constructed from pressed steel with black-coated finish. With non-slip rubber handle, can effectively reduce user fatigue..
  • Advantage – With the help of the built-in cutter and winding mechanism, the strapping can be tightened and cut quickly and effectively..
  • Features – This CV joint plier is easy to use, which is essential to crimp and flatten clamps on ear type CV joint boot clamps..
  • Application – This kind of CV joint clamp is practical and suitable for ear hose clamps on fuel, cooling system and vacuum hoses..
  • Specification – CV joint clamp tool includes a 4.25 inch (10.8cm) long plastic handle and 1 inch (2.5cm) long rubber grips on side levers. Pliers includes 5.75 inch (14.6cm) long formed rubber handles..
Check Stock

Right Angle Clamp ,90 Degree Corner Clamp with Adjustable Double Handle Corner Clamp for Woodworking the Working of Framing Drilling Welding Doweling Making Cabinet Installing Furniture

  • HIGH QUALITY: The Right Angle Clamps is made of strong aluminum alloy materials, will not rust or crack , and can easily drill diagonal holes to make the joint perfect. At the same time, this fixture can create flush, angular shapes. angle clamp connector suitable for woodworking the working of framing drilling welding doweling making cabinet installing furniture.
  • CONVENIENT AND FAST: Drill inclined quickly and easily to hide the screws in the wooden furniture. 90° drilling angle to ensure accurate screw connection, please note: the max thickness for this angle clamps can fix up to 2.3inches (58mm).
  • EASY TO USE: It works smoothly and has no burrs, and its easy to drill Right Angle to hide screws in wooden furniture, which helps improve work efficiency.
  • Portable & CARRY: Weight 0.34kg small size can be held by one hand, DIY woodworking tools and can realize precise screw connection.
  • CUSTOMER SERVICE:If you have any problem or question of our product, please contact us via e-mail , our Customer Service will respond within 24 hours.
Check Stock