Reviews Scaffold Joint Clamps

OK5STAR 5 Inch Scaffolding Casters Wheels, 4 Pack Baker Scaffold Caster with Dual Locking Brakes, Heavy Duty 440LBS Capacity per Wheel, Rubber Casters Square 1.25' (or 1 1/4') Stem Replacement

  • Heavy Duty Scaffold Wheels: 5" rubber caster wheel with stainless steel structure for ensuring stability and high strength bearing capacity. It can be used for stacking multiple scaffolding units..
  • Double Lock Mechanism: Each scaffolding wheel with a special lock-in brake which can lock both the wheel and the swivel in the same time, to guarantee the safety of use..
  • Strong and Solid Rubber Wheels: The sturdy scaffolding wheel is made of high quality non-marking rubber material, wear-resistant and reduce pretty much noise..
  • Load Capacity: OK5STAR 5 inch caster wheels can support a load up to 440LBS capacity per wheel.
  • Dimensions: 10 x 5 x 1.25 inches. Quantity:4.
  • Replacement Wheels for Baker Scaffold: 5 Inch for 6 ft baker scaffold wheel. Square stem is 1 1/4" and lock pin at 2 1/2" holes center. Include 4 Spring Lock Pins. You can easily install these scaffolding wheels. They are perfect for scaffold, workbench, shelves or other equipment in warehouse, Industrial and home..
Check Stock

OEMTOOLS 37089 Ball Joint and U Joint Press Set Forged Steel U Joint Removal Tool Ball Joint Separator Rust-Resistant Coated Ball Joint Removal Tool

  • RELIABLE BALL JOINT PRESS KIT: Don’t let removing and installing ball joints be complicated.
  • Remove ball joints quickly and easily with our ball....
  • VERSTAILE BALL JOINT PRESS: Maintain the health of your suspension system.
  • Our ball joint tool kit works on U joints, brake anchor pins, and more.
  • DURABLE DIY TOOL: Get a ball joint puller kit that pays for itself.
  • Easy to use, our ball joints press kit is excellent for saving on the expense of....
  • PRACTICAL JOINT PRESS: Remove and install ball and U joints with ball joint puller set's selection of adapters.
  • EFFECTIVE PRESS KIT: Don’t rely on makeshift methods and lesser C-clamps to do a heavy duty job.
  • Our ball joints kit system is the best way to....
Check Stock

Woodworking Feather Board Inverted Square Power Tool Accessories Unique Chamfer Groove For Router Tables Band Saws Fences(Square Feather Board B Style Yellow), Cutting Tool

  • Right Angle Clamp: Align it, clamp it and fasten it the easy way with our Universal Fence cabinet clamps. Clamping a 90 degree joint couldn't get any easier with our Clamp-It assembly square..
  • Accurate 900: Assemble our angle clamps with any two pieces at 90 degrees, or even a cabinet one corner at a time. Never struggle with trying to get drawers square anymore..
  • Fence Clamp: This corner clamp is ideal for every stage of construction, from assembling plywood cabinets to face frames and drawers. Our fence clamp works with any joinery technique, from nails to hand cut dovetails..
  • Clamping Square: This woodworking square replaces custom clamping jigs, acts as a third hand, and eliminates the need for long clamps. Clamp-It features a 3/8'' hole in each leg to accommodate the universal fence clamp..
  • Woodworking Clamps Set: This kit includes (2) Universal clamp, and (1) Clamp-It Square. Our Universal fence clamps and Clamp-It assembly square both are easy to use..
Check Stock

Woodpeckers Precision Woodworking Tools BC4-M2X2 M2 Plycarbonate Box and Cabinet Clamp Pair

  • These clamps work great on butt joints, miters, dadoes, rabbets.
  • through or half-blind dovetails and box joints even when material overhangs the joint....
  • Our clamps are molded using a nearly indestructible glass fiber filled polycarbonate.
Check Stock

Ear Clamp Pliers with 12pcs Single Ear CV Boot Clamps Band Tool Kit, Ear Clamp Pincer, Ear-Type Clamp Crimp Hand Tool Ear Type CV Joint Axle Boot Clamp Pliers Tool for Auto ATV UTV

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • Material: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Function and Use: These clamps are locking secure and tight on drive & CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp..
  • What You’ll Get: 1Pcs Ear Clamps Pliers, 6Pcs Small CV....
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Aviditi Inspection Tag, Legend\Accepted\

  • Package includes: you will receive 50 pieces of double-sided scaffold tags in the package, sufficient quantity can meet your different demand on multiple occasions, which can be applied at construction sites to record inspections.
  • Reliable material: the safety tag is made of cardstock with a hole with grommet on the top for connecting the tag through a lock shank, wire, string or nylon tie wrap, this design enhances the tear resistance of the tag, which can be applied for a long time.
  • Suitable size: the double-sided rectangular cardstock tag is about 3 inch in width and 6 inch in height, proper size is convenient for hanging, which is enough for eye-catching attention, and does not hinder daily life.
  • Tag legend: the front legend of scaffolding tag reads OK, and the back-side legend is daily inspection record, printed with dark green and black colors to ensure that they are clearly visible and easy to read.
  • Useful function: this scaffold inspection tag is usually applied on construction sites to record scaffolding inspections and related activities, which can inform workers that the scaffold can work safely, and there is space to write data and signature, which helps to warn about safety in use, and display information about equipment status, inspection p....
Check Stock

General Tools EZ-Pro Jointer Clamp Kit #846

  • JOINT AND CLAMP KIT: These jointer clamps are an alternative to expensive jointers.
  • DEAD FLAT EDGES EVERYTIME: Just attach your crooked board to a piece of straight stock using the Jointer Clamps and run the stock along the rip fence....
  • GREAT WITH LONG STOCK: The Jointer Clamp works in two easy passes and is great for use with long stock..
  • PATENTED SWING ARM: Our patented swing arm design allows you to accurately rip wide boards with ease..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service.....
Check Stock