Reviews Two Stages Extruder

Entina X40 IDEX 3D Printer, Independent Dual Extruder 3D Printer with TMC2208 Silent Driver, 4.3' Touch Screen, PEI Spring Steel Magnetic Platform, Built-in Camera, Wi-Fi Cloud Printing 300x300x400mm

  • 【Independent Dual Extruder 3D Printer】The X40 idex 3d printer is designed with independent dual extruders that supports 4 printing modes: single nozzle printing.
  • duplication mode printing and mirror mode printing. You can print two different types materials and colors model, or print two same models at the same time..
  • 【Large Build Volume】Ultra-large forming volume allows you to print single model up to 11.8"(L) x 11.8"(W) x 15.7"(H) / 300 x 300 x 400mm, which provide enough space for your 3d printing creation, give you greater freedom to print. The large 3d printer with dual extruder can use PLA, ABS, TPU, PVA, PETG, HIS, Nylon, Wood, and Metal..
  • 【Auto Leveling & Super Silent】X40 dual extruder 3d printer equipped with intelligent leveling system, which can automatically compensate for the printing height of different points of the hotbed, friendly use for both expert-level and beginners. 32 Bit motherboard with TMC2208 silent driver provides a quieter printing at less than 50db noise level..
  • 【Build-in Camera & Wi-Fi Printing】Our big 3d printers X40 equipped with Wi-Fi chip and built-in camera that helps to keep an eye on prints in case of incorrect settings, and helps to pause or abort printing via Wi....
Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

R QIDI TECHNOLOGY i Mates 3D Printer,All Metal Frame and Fully Closed Structure Large Print Size 10.24 L X7.87 W X7.87 H 2021 New Model

  • Excellent industrial design, high-end manufacturing, it can be used out of the box. We adhere to high-standard production, strict process....
  • Outstanding industrial structure. QIDI Technology has always adhered to the use of high-end industrial-grade FDM structure. The imates' printing....
  • Unique extruder.The i mates 3d printer will be equipped with one set of 0.4 mm extruder and one set of 0.2mm hotend..
  • Excellent user experience, large UI interface.The imates equipped with self-developed QIDI slicing software, two modes can be selected: normal mode....
Check Stock

FLASHFORGE Creator Pro 2 3D Printer with Independent Dual Direct Drive Extruder for 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Stable & Precise Printing with ABS, PLA, PETG, PVA, Hips

  • 【Independent Dual Extruder】Compared with traditional parallel extruders, the independent dual extruder structure can print copy and mirror models at the same time, and better supports soluble consumable printing. Higher printing efficiency.
  • 【Considerate Machine Design】Fully enclosed body with removable cover to meet the temperature requirements of different strands.
  • All metal frame body with stable structure.
  • Alloy material construction plates with 6.5mm thick alloy material which can be heated, resistant to transformation..
  • 【Residue Scraping Design】In the process of dual printing mode, the filament tends to overflow due to the continuous heating of the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, and get cleaner dual prints..
  • 【Widely Filament Compatibility】240℃ direct drive dual extruder works with PLA, ABS, PVA (print with PLA), HIPS (print with ABS), PETG Filament, support 3rd party filament. CP2 The Best Dual Extruder 3D Printer Choice!.
  • 【Warranty and Service】All FLASHFORGE 3D printers come with lifetime technical support and a one-year warranty. We provide 24-hour online customer service, if you have any questions about the product operation or so....
Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Upgrade 3D Printer Parts MK8 Extruder Aluminum Alloy Block Bowden Extruder 1.75mm Filament for Creality 3D Ender 3,CR-7,CR-8 CR-10 CR-10S CR-10 S4 and CR-10 S5 Left Hand

  • [UPGRADING] Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable..
  • [REPLACEMENT] MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.
  • [Easy to use: used] for 1.75mm filament of 3D printer MK8 bowden extruder frame.
  • [Stable and durable] Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original....
  • [Advantage] the metal extruder have better stronger pressure to pushing filament into printer nozzle so will improve the printer's performance. And....
Check Stock

Official Creality Ender 3 S1 3D Printer, Upgraded Direct Drive FDM 3D Printers, Quick Assembly, with Auto Leveling Bed, Dual Z-axis Screws, Spring Steel Print Bed, Build Size 220x220x270 mm

  • 【”Sprite” Direct Dual-gear Extruder】Creality Ender-3 S1 3D Printers Use Brand-new self-developed “Sprite” direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the “Sprite” is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Power Loss Recovery and Filament Sensor】Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dua....
Check Stock

BIQU H2 Extruder V2.0 New Upgraded Dual Gear Extruder 3D Printer Dual Drive Feed Not Stuck for Creality Ender&CR Series Printers Geeetech Anycubic Mega S Printers and Prusa I3 DIY 3D Printer Kits

  • √【Upgraded Gear Is No Longer Stuck】①The design of output gear modulus is changed from 0.5 to 0.25, reducing gear outer diameter,which can....
  • √【The Advantages of Upgraded Stainless Steel Gear】H2 extruder V2.0 is upgraded to new high quality stainless steel output and transmission gears....
  • √【Brand New Titanium&Copper Alloy Heat Break】BIQU H2 extruder V2.0 adopt titanium&copper alloy all metal heat break, the best quality material....
  • √【High Performance Unique Cooling System】The heat sink structure on H2 extruder V2.0 is optimized to ensure airflow is diverted up and away from....
  • √【Wide Compatibility】H2 extruder has wide compatibility for variety 3D printer on the market like Creality Ender & CR Series Printers, Geeetech,....
Check Stock