Reviews Tool Chest Lock Bar

S AFSTAR 6-Drawer Rolling Tool Chest, High Capacity Tool Storage Cabinet with Wheels and Locking System, Removable Toolbox Organizer with Sliding Drawers (Red)

  • 【11'' Taller Than Others】As it is an enhanced design, it's about 11'' taller than other 2-piece tool chests, enable it has more capacity to store different tools with a similar price. And the middle part is detachable, the top box and bottom box can be used individually as well..
  • 【Detachable Top Box】The detachable top box can be inserted on the bottom for transportation if needed, so you can load it into your car or van during work travel. It’s an ideal tool organizer for home workshops, garage, basement, repair store, warehouse, etc..
  • 【4 Universal Wheels】The wheels can swivel 360 degrees smoothly so that you can move this rolling tool chest without any effort. 2 of them are lockable and it won't move during use. A handle on the side will help you push and control it more easily..
  • 【Locking System for Security】The lock on top drawer section serves to keep tools secure and keep power tools locked away from young children. It comes with two keys in case you accidentally lose one of them. You can put the keys of the lock in a safe place..
  • 【Solid and Durable Construction】Constructed of cold rolled steel with powder coated finish, the rolling tool chest was built to last. The ball bearing slides make the drawers operate very smoothly and ....
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

Vector Tools ISO/Bubble Flaring Tool Kit, 9 Piece | Includes Blow-Molded Case W/Mini Pipe Cutter

  • Make your own brake lines with the bubble Flaring I.S.O tool Kit, designed for metric soft steel brake lines requiring an “ISO” or bubble style flare.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm, 10mm.
  • ISO/Bubble Flaring Tool Kit designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
Check Stock

56 in 23-Drawer Tool Chest and Rolling Cabinet Set 18 Ga Steel 22 in D Textured Black Matte

  • The Husky 56 in. W, 22 in. D with 23 drawers Tool Chest and Cabinet Set is a heavy duty, 18-Gauge steel, tool storage unit that is rated for 2,500 lb. loading capacity. This tool chest and cabinet set with 23 drawers provide 42,930 cu. in. of storage. The heavy duty drawers are rated to 100 lbs. each.
  • The extra deep bottom drawers have double 100 lb. glides. The full length drawer provides convenient storage for longer items, and the small drawers keep smaller items in a confined space. Drawer liners are included to protect and keep your tools in place..
  • The built in full length power strip includes 8 outlets and 2 USB ports, making it easy to keep all of your tools charged. Also included is a rechargeable magnetic LED work light. This light charges via a USB connection, has 3 light modes, a recessed folding hook, and produces up to 360-Lumens.
  • For added security, both the chest and cabinet are fitted with a barrel key lock system. This toolbox weighs in at 542 lbs. so the 5 in. x 2 in. heavy duty industrial grade glides with easy locking pedals are needed to smoothly role this unit around your work area..
Check Stock

Defender Security U 11316 Swing Bar Door Guard With High Security Auxiliary Lock, Satin Nickel Finish, 1-Pack

  • SWING BAR DOOR GUARD – The Defender Security U 11316 Swing Bar Door Guard, with a satin nickel finish, will increase peace of mind when answering the door by allowing the door to be cracked open slightly for viewing..
  • ADDITIONAL HOME SECURITY – Add security to your entry door and help prevent forced entry. When engaged, a ball on the keeper interlocks with the bar lock and prevents an intruder from pushing their way through..
  • THUMB TURN LOCK – The additional thumb turn security lock blocks the release tool from disengaging the door guard latch..
  • EASY INSTALLATION – Installation is quick and easy, and all fasteners are included – extra security and peace of mind can be achieved in just minutes!.
  • EMERGENCY BREAKAWAY – In case of emergency, the thumb turn will breakaway with approximately 100 lbs. of force..
Check Stock

36" Tool Box with Wheels 4 Drawers Rolling Tool Cart, Wooden Top Workbench, 660lbs Total load Tool Cabinet with Locked Drawers Storage Organizer Cabinet for Garage, Warehouse, Repair Shop, Workshop

  • ... [WITH 4 DRAWERS] - Made of high-quality reinforced steel, this tool storage organizer is durable for heavier items and stable for long-term use. Because of its heavy-duty steel construction, it can hold up to 400 pounds of tools inside, each drawer 100lbs loading. 4 drawers with a key and lock, make sure your tool chest has a locking mechanism to keep the belongings protected..
  • [MULTI-FUNCTIONAL STORAGE SPACE] - The tool box has four drawers and an open storage space, providing sufficient storage space and allowing you to classify tools. The drawer is equipped with smooth ball bearing sliders for easy opening and closing. Wooden Top workbench to provide you an instant workbench. A small expandable side table can also be used to store objects. The entire tool cabinet can carry a load of about 660LBS(You can sit on it)..
  • [EASY TO MOVE TOOL CABINET] - Four five-inch 360-degree rotation casters let you maneuver the tool chest right where you need it, and two of them with the brake to keep the chest from moving while you work. Equipped with a side handle, it is comfortable and helps to move the cart easily..
Check Stock

OEMTOOLS 24730 3-Drawer Slide Top Tool Cart, Rolling Tool Chest with Power Supply, Slide-Top Compartment for Easy Access, Quick-Lock Tool Drawers, Blue

  • ROLLING STORAGE CART WITH DRAWERS: This large lockable rolling toolbox on wheels features 3 tool drawers, an enormous top compartment, and an adjustable bottom tray.
  • Rolling tool cabinet provides tons of storage space for technicians on the go.
  • EASY TO MANEUVER: Our tool box with wheels features two swivel casters, two locking casters, and an ergonomic steel handle for easy maneuvering.
  • Durable casters on this tool chest with drawers supports a loading capacity of up to 1,500 pounds.
  • HEAVY DUTY ROLLING TOOL BOX: This cart with wheels and drawers is constructed with an 18-gauge steel shell with a durable matte finish and 19-gauge steel drawers.
  • Tubular locks on this mechanic tool cart keep your professional tools secure.
  • CONVENIENT FEATURES: Tool box on wheels includes integrated power, allowing you to store power tool batteries within reach and charge them as needed.
  • Tool cart with drawers charges electronic devices.
  • Quick-lock feature prevents drawers from opening.
  • ROLLING TOOL CART SPECIFICATIONS: Dimensions: 36" (W) x 21" (D) x 48" (H).
Check Stock

Aobabo Metal Rolling Tool Chest Cabinet with 1 Drawer,Garage Steel Tool Cabinet on Wheels,Lockable Steel Cabinet for Tools,Assembly Required

  • 【Excellent for your garage】:Tool chest with wheels designed with generous dimensions of 31.39"H x 30.71"W x 18.11" D,59.4 lbs This storage cabinet can easily be placed against within any area of your garage..
  • 【Shelves adjustable】:Metal tool cabinet with a height adjustable shelves,each shelve can loading 120 lbs,whole cabinet can loading 240 lbs. And one drawer with slides rails,open and closed smooth.Drawer loading capacity 80 lbs.
  • 【Modern design】:Garage storage cabinet with black body and gray door,top can put tool and screws also.Internal can easily put away all your tools and keep your garage neat and organized..
  • 【Lockable and move easily】:Tool chest cabinet with lock and two keys,high secure. And with 4 lockable casters.which make move very easily.this is important for garage..
  • 【Easy to put together】:This Rolling tool cabinet need assemble,but with clearly instruction,easy to put together,meanwhile,if have any problem in assemble,just contact us freely,we willing follow and assist until be solved..
Check Stock

39\X13\X10\ Black Aluminum Heavy Duty Pick Up Truck Truck Bed Tool Box Trailer Storage Tool Box w/Lock & Keys

  • 39"(L) x 13"(W) x 10"(H) Overall Size；Surface Finish:Powdercoated Black Aluminum；5 Bar Tread Pattern Strengthens the Aluminum for Maximum Durability.
  • The tool box is designed to save space and provide extra storage in your truck bed. This tool box is constructed of heavy duty textured aluminum for maximum durability..
  • The door features a over-hanging lip which resists water from getting inside. Fold up door provides full access. Built-in lock ensures all items are kept safe and secure. This aluminum underbody tool box is perfect for storing your tools in your vehicle or at home..
  • With Lock and 2 Keys: This aluminum box has a lock and 2 keys so you can safely use it to prevent things from being lost..
  • Perfect Tool Cabinet for Anywhere: This tool box can be mounted on a hitch rack, cargo rack of your camper, perfect for the tongue of your enclosed trailer, suitable to be installed on the rear of your RV for extra storage..
Check Stock