Reviews Threaded Rod Square Nuts

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

Lock Nut Assortment [1/4\-20,3/8\-16,5/16\-18,1/2\-13,#10-24,#8-32], VIGRUE 304 Stainless Steel Nylon Insert Hex Lock Nuts & Washers Kit SAE, 240PCS

  • Finished nuts are six sided nuts of standard thickness vs heavy duty hex nuts.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Use with washers to help distribute the load (not included).
Check Stock

PF WaterWorks PF0907 Assembly Lavatory Pop-Up Drain Repair Kit-Threaded Adjustable Center Pivot Nuts (Universal, Moen, Pfister), 3 Sizes of Balls, Clip, Linkage, Pull Rod, (Plastic), Chrome

  • UNIVERSAL– Retrofits in most standard ball rod popup drains.
  • ROBUST CONSTRUCTION – Long Lasting Metal Rod.
  • THREADED ADJUSTABLE BALL ROD DESIGN – to Mount Ball Easily and to Adjust Length.
  • EASY, NO TOOLS INSTALL – in Existing or New Pop-Up Drains.
  • KIT INCLUDES –Ball Rod, 3 Nuts (Pfister/Plastic, Gray, and Chrome plated), Gaskets, Three sizes of Balls. Linkage, Pull Rod.
Check Stock

Steel Hex Nut, Zinc Plated Finish, Class 6, DIN 934, Metric, M2.5-0.45 Thread Size, 5 mm Width Across Flats, 2 mm Thick (Pack of 100)

  • Finished nuts are six sided nuts of standard thickness vs heavy duty hex nuts.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Use with washers to help distribute the load (not included).
Check Stock

SCITOO 2Pcs Macpherson Strut Spring Compressor Tool 11.5\ fit for 13/16\ Socket 1/2\ Drive

  • 【WIDE APPLICATION】 The SCITOO coil spring compressor fit for Macpherson strut coils of various sizes. Working with manual or power tool's 1/2 inch square drive or 13/16 inch hex sockets to compress the coil spring to replace the shock absorber unit or spring.
  • 11.5 inch threaded rod for maximum opening to 10.5 inch on MacPherson struts springs to install the jaws to the coil, suitable for most vehicles with MacPherson strut springs..
  • 【PRODUCT USAGE】 Common to strut assembly from vehicle to transfer old spring to new strut, to repairs on bent struts, strut tubes, and damaged pieces. Compress the strut spring coils for convenience when replacing strut assembly and springs contact and built-in detent pins lock the spring coil in place for safer operation. Lubricate threads withseize compound for prolonged life..
  • 【BUILT TO LAST】 The threaded rod is made from carbon steel and the hooks are forged steel, high-quality materials provide better compression resistance and long service lifetime. Easy to use, suitable for both professional mechanic and beginner use..
  • 【LOCKED FIRMLY】 The SCITOO threaded rod has a wide spring contact surface and a built-in positioning pin, which can lock the coil spring in place to ensure safer compression of the....
Check Stock

LS1 Harmonic Balancer Installer Crank Pulley Installer Crankshaft Installation Tool For GM LS1/LS Engines 1997~Current

  • Great Compatibility — Works on all GM LS & LT series engines 1997-current (Gen 3, 4, & 5)..
  • Upgrade Design — Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
  • Special Features — Includes 1×Threaded Rod, 1×Flange Nut and 2×Washers. Threaded rod is hardened 94 Rockwell and hardware is grade 10.9..
  • Superior Quality — Premium grade heat-treat heavy duty steel, galvanized steel nuts and aluminum washers, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life..
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

Beduan Stainless Steel Long Threaded Screw, Fully Threaded Rod, M10-1.5 Thread Pitch, 250 mm Length

  • Material: Made of stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Package including 1 pcs rod, can be drilled, cut, heated and shaped..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • Different Length of the rod can be widely used in many occasions..
Check Stock

NutBoss

  • NutBoss spins nuts onto threaded rod 10X faster than by hand.
  • Use with any power drill including quick bit chucks.
  • Durable construction will last through many jobs.
  • Easy to use, fits in your pocket, Saves time and money, reduces repetitive motion injuries.
Check Stock

Prime-Line 9192524 Square Nuts, #10-24, Zinc Plated Steel, (10-pack)

  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Typically used in combination with a washer (not included).
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock