Reviews Thread Fittings

Metals Brass Pipe Fitting,Converter Adapter,1/2” G Thread Female to1/2” NPT Male Connector, Shower Extension Connector ,Chrome (2-Pack) (1/2G female X1/2NPT male)

  • [High-quality material]: High-grade solid brass, strong and wear-resistant, more durable than iron and iron galvanized pipe fittings..
  • [Durability]: This shower fittings has a first rate chrome finish, excellent performance in corrosion resistance. it will match the finish of whatever shower hardware you use it on..
  • [Superior thread]: Exquisite craftsmanship, deep thread can make the joint better bite the tight thread, smooth and not sharp, making work easier and more efficient。.
  • [Easy to install] The smooth thread will reduce the resistance during the installation process, convenient and fast, and is equipped with rubber gaskets to eliminate leakage..
  • This adapter is very suitable for DIY showers, bathrooms, RV, outdoor showers, showers in other places, this is your expensive shower accessory combination solution!.
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

SAFBY 2 PCS Aluminum Global Type F Cam and Groove Hose Fitting,1.5“ Plug x 1.5” NPT Male with 2 PCS 1.5 Camlock Gasket Fitting (1.5\)

  • Aluminum Camlock (Cam and Groove) Fittings.
  • Thread Size - 1.5 inch Male National Pipe Thread.
  • Pack of 2 Fittings and 2 PCS 1.5" Camlock Gasket Fitting.
Check Stock

TAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 3/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N3(Pack of 2)

  • 【Product Name】 Straight Push to Connect Fittings Air Fittings.
  • 【Size】1/4" Tube OD x 3/8" Female NPT Thread，Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
  • 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F.
  • 【Features】Control pipeline connection or disconnection..
Check Stock

TAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 1/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N1(Pack of 10)

  • 【Product Name】Straight Push to Connect Fittings Air Fittings.
  • 【Size】1/4" Tube OD x 1/8" Female NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
  • 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F.
  • 【Features】Control pipeline connection or disconnection..
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

WOD PTST35S Plumbers Pipe Teflon Thread Seal Tape - 1/2 inch x 520 inch (Case of 100 Rolls) - Leak Proof Sealant for Water, Gas, Oil, Most Chemicals, Hydraulic and High Pressure Lines

  • ...e high-pressure connections such as new shower heads, NG connections, and freon high-pressure connections. WOD pipe sealant tape is the synonym to quality, service, selection and support. Meets Federal Military Spec # T-27730A & UL31 RO.
  • EASY TO USE - WOD PTFE Tape is easy to apply simply wrap threads and apply fittings - no waiting for drying or curing.
  • can be easily removed after years. The teflon seal tape is made to create an airtight seal which will last for a lifetime. These tapes are known for their durability and will never crack or harde. The professional plumbers tape choice for fool-proof thread seals on water pipe, air hoses, water systems, plumbing fixtures, plastic spool and shells, plumbers, and pipe fitters..
  • HIGH TEMPERATURE RESISTANCE - WOD Plumbers thread tape holds in temperatures from -450F to 500F. They Can be applied across commercial & home appliances, sprinklers, shower heads, gas heaters, propane and pipe fittings. Works For Both Air And Water - Plastic and Metal Pipe Fittings.
  • STANDARD GRADE - Standard quality for home, commercial and industrial uses, good for gas, drinking water pipes, and garden hose faucets..
  • PEACE OF MIND SHOPPING 100% MONEY BACK GUARANTEE! - We sell Durable Pipe Thread Seal Tape in multiple sizes. If ....
Check Stock

Twinkle Star Pressure Washer Adapter Set, 1/4 Inches Quick Disconnect Kit, Quick Coupler Fittings, 5000 PSI, TWIS223Y

  • 1/4 quick connect coupler set equipped with 1 pc quick coupler socket and 1 pc quick coupler plug. Max. Working Pressure: 5,000 PSI.
  • Brass quick coupler socket: 1/4’’ female NPT thread and quick disconnect socket.
  • Stainless steel quick coupler plug: 1/4’’ plug and male NPT thread..
  • Pressure washer adapter set are made of premium quality brass and stainless steel, durable, provides secure and quick fittings. Ball lock design ensures a solid connection..
  • Provides secure and quick fittings, simple to assemble and disassemble. Quick connect pressure washer gun, wand, hose or nozzle..
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock