Reviews Temperature Sender

Receiver for LKV373A HDMI Extender Kit over CAT5/6/7 up to 390 ft/120m

  • LKV373A Version 4.0 Receiver,works with LKV373A Version 4.0 120m HDMI extender kit only.
  • Please check the version for your sender(transmitter), if your sender is version 2.0 or 3.0, please do not buy it.
  • Supports up to 1080p (1920x1080) resolution,Extends the HDMI signal up to 390ft/120m.
  • Works with Cat5 / Cat5e / Cat6 / Cat7 ethernet cable following the standard of IEEE-568B.
  • We stand by our products 100% with a 12-month warranty.
Check Stock

Zerodis CO2 Refilling Adapter, Adjustable CO2 Cylinder Refill Adapter Valve CO2 Tanks Bottle Connector Accessories 3000psi Pressure Gauge

  • Works for oil,fuel,diesel,gas,water,air pressure. Can be used in oil tank,gas tank,diesel tank etc..
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Pressure and Pull Pressure Sensor..
  • Input 5V DC,Output: 0.5V – 4.5V linear voltage output.
  • Package Include: 1 X Pressure Transducer.
Check Stock

100TECH Fuel Sending Unit 240-33 ohms 11'(280mm） Marine for Boat Vehicle Truck RV Fuel Tank Sending Unit Fuel Water Level Sending Unit Fuel Gas Sender Fuel Water Level Sensor Fuel Gauge Sending Unit

  • 100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank..
  • The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4"-24", Please Contact us Directly for More Information..
  • [Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions.
  • The Wiring Instructions are Straight Forward and Easy to follow..
  • SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto..
  • [The Size of Float] The Diameter of Float is 1.38"(35mm). If You Have to Drill the hole, Diameter 1.50"(38mm) Hole Would be Perfect..
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine

  • 6 Gauge Kit- Includes GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge. 7 color backlight : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 80 MPH, Tachometer indicating Range: 0 - 8000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor....
Check Stock

FASTROHY 0.5-4.5V 60 Psi Universal Pressure Transducer Sender/Sensor Solenoid for Oil Fuel Diesel Gas Air Water,Gauge Pressure 1/8\NPT Thread Stainless Steel

  • Works for oil,fuel,diesel,gas,water,air pressure.
  • Can be used in oil tank,gas tank,diesel tank etc.
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Load Cell Sensor. CMC for Pressure and Pull Pressure Sensor..
  • Package Includes: 1PC x Pressure transducer (With cable).
Check Stock

AUTEX Pressure Transducer Sensor 100 Psi Pressure Sender 316 Stainless Steel Oil Pressure Transmitter 1/8" -27 NPT For Oil Fuel Air Water Pressure

  • 100% new pressure transducer /pressure Sender/ Pressure Transmitter, Our material is using top of line 316 stainless steel (not 304)and high temperature auto-graded plastic..
  • Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel.
  • Electromagnetism Compatibility :EN50081-1.
  • Wiring connector: water sealed quick disconnect.Mating connector and wire harness (pigtail) is included.
Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

AUTEX 150 Psi Pressure Transducer/Sender/Sensor 150/200 Psi Stainless Steel 1/8”-27 NPT Pressure Transducer Sensor Compatible With Oil Fuel Air Water

  • 100% brand new Pressure transducer/sender/sensor 150 psi stainless steel for oil,fuel,air,water.
  • 150 psi Pressure transducer/sender/sensor/Transmitter....
  • Output: 0.5V–4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 150 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel / Electromagnetism Compatibility:EN50081-1.
  • Package include: 1 pcs x150 psi pressure transducer.
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

  • 6 Gauge Kit- Includes GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge. 7 color backlight : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 120 MPH, Tachometer indicating Range: 0 - 6000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Senso....
Check Stock