Reviews Straight Shank Taps
Starrett 91A Tap Wrench 1/16 - 1/4 Tap Size 3/32 - 5/32 Square Shank Diameter 6 Body Length
- Tap wrench body holds 1/16" to 1/4" taps with 3/32" to 5/32" square shank diameters and is used to tap workpieces (requires taps, not included).
- Plunger-type spring-operated knurled sleeve applies and removes the tap when pressure is applied.
- Tempered gripping surfaces firmly hold square or round shanks.
Check StockKaufhof ATW-0053 Adjustable T-Handle Tap Wrench Set – 3 Piece M1-M4 / M4-M8 / M6-M12
- Adjustable tap wrench holds shank sizes 1/4" - 1".
- For use with 1/4"-1-1/8" hand taps (1/4" - 1" shanks).
- For use with 1/8"-3/4" pipe taps (1/4" - 1" shanks).
- 9/32"-29/32" hand reamers (1/4" - 1" shanks).
Check StockWalton 18013 13 Piece Multi Flute Tap Extractor Set With Square Shank
- For removing Machine Screws and Broken Hand Taps.
- Tapered square shank fits into manual brace tools and drivers handles for added cutting pressure.
- Threads per inch need not be specified as Tap Extractors will fit both NC and NF taps.
- Hardened steel fingers of Walton Tap Extractors fit in the flutes of a broken tap to back it out simply and safely.
- When fingers become bent or broken or are too short for further use, replacement fingers are available.
Check Stock6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS
- Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
- Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
- Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
- Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
- Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits
- TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
- THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
- USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
- APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
- GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check StockDrilling, Reaming, Tapping and Milling on the Drill Press (DVD)
- High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
- High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
- Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
- High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
- Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check StockChampion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool
- High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor.
- High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage).
- Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs).
- High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm).
- Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity.
Check StockTap Drill Bit Set, M3-M10 Tap Drill Bits Kit Titanium Coated HSS Drill and Tap Bits 1/4\ Hex Shank Metric
- High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
- Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.
- Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
- 6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
- Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Check StockDelitonGude Metric M5 Machine Screw Tap 10pcs 5% Cobalt Spiral Flute Drill Taps Metric M5 Thread Tapping Tool(M5)
- Great product and very good quality. Made from M35 Hight-speed Steel and 5% Cobalt.The surface was nitrogen treated,which does't rust, very durable.Size:M5X0.8mm.
- Used to make new threads or re-thread damaged or jammed threads.Spiral groove taps have a longer service life than ordinary straight groove taps and can be used repeatedly..
- Spiral Flute design, well chip removal, Easy tapping.With spiral flute taps, it is not necessary to repeatedly advance and retreat the taps and chips during tapping, which effectively improves the tapping efficiency.
- because the chips are unobstructed, the chips will not be blocked in the narrow flutes..
- Strong Box package Included: 10Pcs Spiral flute Metric Taps.
- Suitable for taping Blind hole,Such as Steel Cast Iron, Aluminum Alloy and other non-heat treater Metal,Hardness less than HRC30..
Check Stock