4 Pack Single Gang 1.0 Speaker Wire Wall Plate (Banana Plug Wall Plate) for 1 Speaker, White

  • Speaker wire wall plate: the cable wall plate uses screw-type binding post and is connected with 12 to 18 AWG bare speaker wire, banana plugs or spade connectors.
  • The two-piece wall plate with insert is easy to install with the matching mounting screws.
  • Banana plug wall plate: the two terminals of this speaker wire wall plate connects a single speaker.
  • The audio wall plates fit an existing standard single-gang outlet or low voltage bracke.
  • Easy to use: the speaker plug wall plate with female ports on both sides can connect to speaker cable concealed behind the wall.
  • Binding post terminals on speaker wall plate have red and black ring labels on both sides for easy identification.
  • Durable material: this speaker wire wall plate is made of ABS material, and the binding post terminals is gold-plated.
  • It has chemical resistance, heat resistance, non-toxic and tasteless.
  • Package content: you will get 4 pieces of single-gang wall plates, 4 pieces of banana jack binding post inserts and 16 pieces of machine screws, this complete set provides easy installation and use to meet your daily need....
Check Stock

Speakon to Speakon Cables 2 Pack by FAT TOAD | 50ft Professional Pro Audio Green Speaker PA Cord with Twist Lock Connector | 12 AWG Wire for Impeccable Studio Recording & DJ Stage Performance Gear

  • PROFESSIONAL GRADE DJ SPEAKER WIRE - 12 AWG GAUGE 50 FEET LONG SPEAKON CABLES: This pair (2 Pack) of professional-grade, 12 AWG (12 ga speaker wire), 50-foot, male to male Speakon cables are made for you. Whether you’re a touring musician, mobile DJ, or just a person with a passion for music, these Speakon DJ speaker cables will get the job done gig after gig with a crisp, clean sound that will help bring out the best in most any Speakon compatible sound equipment..
  • SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: These 50-foot Fat Toad Speakon speaker DJ cables are tough. Our Speakon DJ audio cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your studio speaker cables from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
  • STAGE SPEAKER CABLES WITH DURABLE TWIST LOCK SPEAKON TO SPEAKON CONNECTORS: Speakon connectors are quickly becoming the new standard for professional-grade equipment. With the 50-foot Fat Toad male to male Speakon speaker cable and your compatible equipment, you’ll be ahead of the game. The Speakon connector’s twist-lock design means no mo....
Check Stock

Rockville D14 7000w Peak/2000w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp

  • Power Ratings: RMS Power Output: Stereo 8 Ohm: 2 x 700W. Stereo 4 Ohm: 2 x 1000W. Bridged 8 Ohm: 1 x 2000W. Peak Power Output: Stereo 4 Ohm: 2 x 3500W Max. Bridged 8 Ohm: 1 x 7000W Max. ​​.
  • Terminals: Input Terminals: Combo jack (XLR and ¼”) A & B inputs. Output Terminals: Banana binding post speaker output. Speakon output. XLR output to connect another amplifier or powered sub.
Check Stock

Speakon to 1/4 Adapter 2-Pack Hocauvion Speakon Male to 1/4 TS Female Converter Connectors - 2 Pack

  • 【4-Pack Speakon To 1/4-Inch Adaptors】ACC31A1P2 4-pack speakon to 1/4-inch adaptors compatible with speakon and 1/4-inch female connections.
  • 【Ideal For Connecting Speaker Cable With Phone Plugs To Loudspeaker With Speakon Jacks】Each ACC31A1 adaptor designed to adapt an unbalanced phone....
  • 【With Speakon Twist And Lock Features】Offering secure connection with speakon twist and lock features.
  • 【Perfect For Powerful Amplifier】Capable of carrying high current making them perfect for powerful amplifiers.
  • 【Great For A Quick Fix】Great for a quick fix or a need to convert a cable with ultimate audio delivery.
Check Stock

KK YB-ZB 1pair Set(4 Spade Plug & 4 Banana Plug) HiFi OFC Speaker Wire, Spade Plug to Pin Type Plug 1.5M(4.92ft)/3M(9.84ft)/5M(16ft), KK YB-ZB (3M(9.84ft))

  • PROFESSIONAL GRADE DJ SPEAKER WIRE - 12 AWG GAUGE 50 FEET LONG SPEAKON CABLES: This pair (2 Pack) of professional-grade, 12 AWG (12 ga speaker wire), 50-foot, male to male Speakon cables are made for you. Whether you’re a touring musician, mobile DJ, or just a person with a passion for music, these Speakon DJ speaker cables will get the job done gig after gig with a crisp, clean sound that will help bring out the best in most any Speakon compatible sound equipment..
  • SPEAKER CORDS INSTALLED WITH RUGGED AND BUILT TO LAST LARGE 8.5MM RUBBER JACKET: These 50-foot Fat Toad Speakon speaker DJ cables are tough. Our Speakon DJ audio cables are encased with a thick and durable 8.5mm insulating rubber jacket. This durable insulating jacket not only helps protect your studio speaker cables from damage, but it also insulates them from outside static interference usually caused by electrical wires or other sound equipment..
  • STAGE SPEAKER CABLES WITH DURABLE TWIST LOCK SPEAKON TO SPEAKON CONNECTORS: Speakon connectors are quickly becoming the new standard for professional-grade equipment. With the 50-foot Fat Toad male to male Speakon speaker cable and your compatible equipment, you’ll be ahead of the game. The Speakon connector’s twist-lock design means no mo....
Check Stock

CESS-002L Barrier Spade Fork to 1/4 Inch TS Speaker Cable Adapter (Large Spade)

  • Barrier spade fork connectors to 1/4" TS speaker cable adapter, 2 channels.
  • Connect from binding post to 1/4 TS speaker cable.
  • Large Size spade fork: inside width 1/4" (6mm), outside width 1/2" (13mm).
  • 12 Gauge CESS 680 strand count silicone soft cable, cable length: 6 inches.
Check Stock

Kalevel 6pcs 2-Way Speaker Box Terminal Subwoofer Box Connector 75mm Spring Loaded with Screw Binding Post and 10pcs Screws

  • ✅ Set of 16 -- This item includes 2pcs round speaker box terminals, 4pcs screw binding posts and 10pcs bonus screws..
  • ✅ Available Sizes -- Speaker terminal box is available in 4 overall diameter sizes, including 75mm, 82mm, 90mm and 105mm Set.(Please choose your appropriate one).
  • ✅ Screw Binding Post -- Screw binding post supports bare wire and spades, ensuring optimal signal transfer and adopting positive (red) and negative (black) indicators for proper wiring..
  • ✅ Easy to Install -- Spring loaded speaker cup connector allows you to insert the wire by pressing it down and install directly. You can also replace spring loaded type with screw binding post to install..
  • 【Material】 -- Speaker wire terminal cup is mainly made of premium plastic and metal, reliable, no rust and durable. Designed for DIY speaker, subwoofer boxes, bare wire (diameter below 0.2in)..
Check Stock

Portable Cabinet PA Speaker System - 1600 Watt Outdoor Sound System Vehicle Stereo Speakers w/ Dual 12\ Woofers, 3.4\ Piezo Tweeters, 5\x12\ Super Horn Midrange, Crossover Network - PylePro PADH212

  • ...n assembled w/ highest quality components. Features a 5" x 12" super horn midrange/tweeter w/ 1.5'' titanium compression driver that has been constructed with a 20 oz. magnet.
  • BUILT-IN CROSSOVER NETWORK: This portable sound system has a built-in crossover network & 50-20k Hz frequency response. Also equipped w/ dual Speakon 1/4" jacks & binding post terminals. Ideal for live stage gig, private parties, traveling DJ events.
  • MADE TO LAST: The indoor-outdoor speakers’ wired pa system is made w/ heavy-duty MDF (Medium-Density Fiberboard) construction w/ reinforced corners and carpeted enclosure to withstand years of use and abuse. Also has heavy-duty handles for portability.
  • 1.5" titanium compression driver loaded in horn.
  • Two 12" subwoofers with 2" Kapton voice coils.
  • Giant 80 oz woofer magnet weight for a huge sound.
Check Stock

Aguilar Tone Hammer 500-Watt Bass Amplifier Head

  • 500 watts into 4 ohms, 250 watts into 8 ohms.
  • Fully adjustable, Drive Control featuring Aguilar’s proprietary AGS(adaptive gain shaping) circuit..
  • Balanced Output: XLR balanced output with pre/post EQ and ground lift switch.
  • One 1/4 Inch input jack, compatible with all active and passive basses.
Check Stock