Reviews Solid State Relay

RCO210 3 in 1 Hard Start Capacitor Replacement Compatible with Supco Relay Overload 1/12 hp- 1/2 hp Compressors Voltage-115VAC

  • RCO210 – RSC Series Solid State Relay Overload & Start Capacitor Combination Compatible with Supco.
  • For compressor sizes 1/12 HP through 1/2 HP. Voltage-115VAC.
  • Replaces all 3 electrical components – relay, overloard and start capacitor on all capillary systems..
  • The 3 n’1 Start Relay adds new life to old refrigerators and freezers by providing an additional boost to the compressor.
  • This product is not original part,The replacement parts come with 90 days warranty. For any reason you are not completely satisfied, please feel free to contact us for a replacement or full refund..
Check Stock

PID Temperature Controller Meter Indicator, Jaybva Digital Universal Thermostat C and Fahrenhe F Display SSR and Alarm Output 40A Solid State Relay and Thermocouple Probe Heat Sink Included

  • furnance, plastic extruder heating process etc..
  • TC/RTD universal input , such as K , J , E , Pt100 etc. SSR solid state relay output ..
  • Dual Output: 7 different Dual Output combinations with 1 relayed output and 1 SSR control voltage output..
  • This PID temperature controller can read TEMPS in Fahrenheit (F) and Celsius(C) . You can choose Centigrade or Fahrenheit unit . Wide Application: This pid controller is widely used in auto system in line of light industry, chemistry, machinary , metallurgy, ceramics, pertrification industry, or temperature control and adjust system of food & beverage, smoker , incubator, oven.
  • Contents included: Temperature controller , one 40A solid state relay , one K type thermocouple sensor probe , one heat sink ( Heat sink size: Roof: 50mm x 60mm.
  • This temperature controller has built in autotuning . After you have set your temps you press and hold the blue button for a few seconds and the AT light will come on and run through an auto tuning program to get you the best PID results..
Check Stock

Innovited HID Replacement Bi Xenon Relay Wiring Harness Hi Lo - H4 9003 HB2

  • [High quality chip]:This product adopts imported high-performance USB control chip..
  • [Stable connection]:This board is designed with square type-b USB interface which assures the stable connection..
  • [Stable performance]:The high quality relay and dedicated relay driven ULN2803 chip ensure relay to work more stably..
  • [Flexible and convenient]:There are two flexible and convenient power input methods, power socket and terminal..
  • [Practical setting state]:The relay can maintain the setting state even if the computer is power off or USB is disconnected from computer after....
Check Stock

Wired DC-AC 3Amp Isolated Solid State Relay Module, SSR in 3-32VDC Out 90-250VAC

  • 10DA/25DA/40DA/50DA/50DA-H/60DA/75DA/80DA/100DA/25AA/40AA/50AA/60AA/5AA/80AA/100AA/10VA/25VA/40VA/50VA/60VA/75VA/80VA/100VA.
  • load voltage: 24~480V/AC，Control voltage 3-32VDC.
  • SSR -10DA/25DA/ 40DA/50DA/50DA-H DC control AC SSR white shell Single phase Solid state relay WITHOUT plastic cover.
  • work instruction: LED，In the closed state, special scenarios where the off-state leakage current is less than 5MA are not applicable. Please purchase with caution..
Check Stock

HiLetgo 2pcs SSR-25DA 25A 250V Solid State Relay Module

  • SSR-25DA 25A 250V Solid State Relay Alloy Heat Sink.
Check Stock

STINGER - 4-Channel100 AMP Solid-State Relay

  • One 40A and three 20A outputs, for a combined total of 100A continuous..
  • Each output has a thermal overload, and short circuit protection along with LED status indicators for the Thermal/Overload, Active/Inactive status..
Check Stock

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

CNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay，K Type Thermocouple Probe and Heat Sink

  • ♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC..
  • ♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay..
  • ♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input.
  • ♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function.
  • ♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously..
Check Stock