Reviews Solid Sate Relay

CGELE Solid State Relay SSR-40AA AC to AC Input 70-250VAC to Output 24-480VAC 40A Single Phase Plastic Cover

♥【What You Get】Each package With 2 mini bag of thermal grease which apply on the back of the SSR to make the temperature dissipate faster..
♥ Product Name: solid state module relay SSR-40AA, 70-250VAC/24-480VAC.
♥ Total size (approximate):58 x 45 x 32mm/2.3" x 1.8" x 1.26" (l*w*t).
Material:metal, plastic, electronic parts..
♥ SSR Application: with a switch no spark, no noise,high switching speed,anti-corrosion,moisture-proof,anti-vibration,long life.high reliability,electromagnetic compatibility and other characteristics..
♥ Solid state relay ideal for automatic process control application, a must component for temperature controller and other machinery control system..

Solid State Relay Module Board has been assembled, and electrical test passed.
Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
Load voltage range: 75 to 264VAC (50/60Hz).
Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

Photocoupler isolation between input control signal and controlled power, isolation surge voltage up to 7500V..
Input signal turn-on voltage DC 3 to 32V, turn-off voltage DC 0 to 0.8V. LED indication for relay turn-on..
Output voltage range: AC 90 to 250V(50/60Hz). Maximum on-state average current 3 Amp. Maximum on-state current 10 Amp (003c 10 seconds). Non repetitive surge peak on-state current: 120 Amp (003c20mS). Load type: General purpose..
This is a simple and practical solid state relay module, which is very convenient to use, for Arduino, Raspberry Pi, ESP32, PLC or other projects. The GPIO of these controllers are directly connected to this relay input to control the mains power, and it is suitable for most loads less than 350 Watts (for 115VAC)/700 Watts (for 230VAC)..
Compact ABS plastic case and wires connect for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..

Large Capacity Relay Holder – This relay box is 6 slots relay panel design, which includes 5 slots for 5 pin Bosch style relays, 1 slot for RTT7121 4 pin relay..
ATC/ATO Fuse Relay Box – This fuse block with relay is also 6 slots relay holder design for ATC/ATO fuses, which makes the fuse relay become safer when use..
Suitable Terminals – This 12v relay box will also come with terminals for relays and fuses, which will enables you to install and use the fuse and relay box at once..
Top & Bottom Cover – This relay box 12v automotive will come with a top cover and a bottom cover, which makes the relay fuse box become a waterproof relay box..
What you get – 1 x Fuse Relay Block with Top and Bottom Cover, 5 x Bosch Style 5 Pin Relay, 1 x RTT7121 4 pin relay, 16 x Blade Fuses(4 x 10A, 4 x 20A, 4 x 25A, 4 x 30A), 41 x Metallic Terminals, 1 Year Warranty. Feel free to contact us if confused..

√ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal).
√ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
√ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
√ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
√ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).

Kit includes Relay Buddy tester, 5 new relay adapters and blow mold case.
Relay Buddy is a quick go/no go tester for the most common automotive relays.
With the included adapters, Relay Buddy now tests 5 different relay types and also tests shielded relays.
Relay Buddy will fail the relay and light the red LED if any of the test cycle proves unsuccessful during the test session.
Settable to 4 and 5-pin relay and uses vehicle's 12 volts battery for power.

Able to test an entire circuit - from battery to component, including the relay With this item the technician can jump a relay.
do an AC charge from the relay by activating the compressor.
do compression testing by activating the starter relay and even check turn signals or lights from the front of the car.
Allows the technician to diagnose the problem without the use of a multimeter.
The lighted display shows the technician the problem immediately.
With this item the technician can jump a relay.
Includes: (1) Tester, (6) popular Relay Leads, and (1) Universal Relay Lead.

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

30A High Current 12V Contactor relay Switch DC power Switching Control Board.
Using high-quality ultra-small optocoupler, anti-interference ability, stable performance..
Using 9.5mm black fence terminal, standard 30A terminal, stable and solid, reliable quality..