Reviews Single Double End Mills

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.
Check Stock

Allied Machine and Engineering TM75010 | 0.495\ Diameter x 0.500\ Shank x 1.25\ LOC x 3.5\ OAL 4 Flute TiAIN Solid Carbide Helical Flute Thread Mill

  • Mills internal and external 60° threads.
  • Single thread form designed to mill common UN and metric pitch sizes.
  • Single form design reduces tool pressure for deep thread milling applications.
  • Reduced shank design can be chucked at any depth.
Check Stock

Allied Machine and Engineering TM25020 | 0.18\ Diameter x 0.187\ Shank x 0.5\ LOC x 2.5\ OAL 3 Flute TiAIN Solid Carbide Helical Flute Thread Mill

  • Mills internal and external 60° UN threads.
  • Single thread form designed to mill common pitch sizes.
  • Single form design reduces tool pressure for deep thread milling applications.
  • AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

Micro 100 TM-080-8X Thread Milling Cutter - UN, 40-64 Thread Size, 0.080\ Cutter Dia, 1/2\ Neck Length, 0.035\ Neck Dia, 0.080\ Cutter Dia, 2 Fl, 1/8\ Shank Dia, 1-1/2\ OAL, AlTiN

  • Mills internal and external 60° UN threads.
  • Single thread form designed to mill common pitch sizes.
  • Single form design reduces tool pressure for deep thread milling applications.
  • AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials.
Check Stock

Micro 100 TM-100-8 Thread Milling Cutter - UN, 32-64 Thread Size, 0.100\ Cutter Dia, 1/2\ Neck Length, 0.050\ Neck Dia, 0.100\ Cutter Dia, 2 Fl, 1/8\ Shank Dia, 1-1/2\ OAL, Uncoated

  • Mills internal and external 60° UN threads.
  • Single thread form designed to mill common pitch sizes.
  • Single form design reduces tool pressure for deep thread milling applications.
  • AlTiN coating option for added lubricity and increased wear resistance in difficult-to-machine materials.
Check Stock