Reviews Woodworking End Mills

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

POWERTEC 71389 T-Track Mini Hold-Down Clamp, 3-5/8

  • INCLUDES: (2) Mini Hold Down Clamps for T-tracks/T-slots.
  • (2) 5/16-Inch-18 thread 3-1/2-Inch long T bolts.
  • FUNCTION: Provides exceptional clamping action for your universal t-track system configurations and assemblies.
  • FEATURES: Ergonomically designed 5 star knobs, non-marring clamping pads, and a high tension clamping capacity.
  • DESIGN: Made from premium grade anodized aluminum with a lever shaped profile ensuring optimal leverage in addition to work piece accessibility.
  • VERSATILITY: Hold Down Clamp Set is ideal for work holding, positioning, and fixturing for many woodworking or metalworking applications, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills and more.
Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
  • The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

SHARS 1/4 X 1/2\ Cobalt Corner-Rounding END Mill 404-5851 P{

  • H.S.S. Corner Rounding End Mill Set Size from 1/16'' to 3/8'', 8 Pcs, 1011-0008.
  • 1/2'', H.S.S. Corner Rounding End Mills, 3/4'', Shank Dia, 1-1/2'' Cutter Dia, 3-7/8'' Overall Length, 1011-1234.
Check Stock

Woodworking Compass Scriber Portable Aluminum Alloy Adjustable Drawing Circle Ruler Marking Gauge Metric/Inch Dual-Scale Fixed-point Marking Gauge Arc Drawing Ruler Carpenter Tools

  • HIGH PRECISION: The Woodworking Compass Scriber has high precision, suitable for professional drawing..
  • ADJUSTABLE RADIUS SIZE: The Woodworking Compass Scriber can adjustable radius size, meet your various drawing needs..
  • PREMIUM MATERIAL: The Woodworking Compass Scriber is made of Aluminum alloy material, corrosion resistant and durable..
  • DUAL-SCALE: The Woodworking Compass Scriber has Metric imperial Dual-Scale for easy adjustment..
  • COMPACT AND PORTABLE: The fixed pen can be and stored at the end of the main body, so you can take it as you go..
Check Stock

Hakkin 20 Pcs Carbide Rotary Burrs Set, End Mill CNC Router Bit, 1/8\ Shank Nano Blue Coating Ball Nose End Mill, Double Cut Coat Rotary Drill for Die Grinder Woodworking, Engraving, Drilling, Carving

  • TUNGSTEN CARBIDE: These end mills are made from high quality tungsten carbide for good hardness ,so these milling cutters have sharp edge..
  • POLISHED AND TITANIUM COATED SURFACE: Well polished and titanium coated surface has a better anti-rust performance.surface is quite clean, neat, and there is no glitches or burrs on the shank..
  • SHARP: These CNC cutter router bits have sharp cutting edges, can be use for milling holes, grooves and edges on plates, smooth cutting..
  • 10PCS/SET: There are 10pcs end mills in this set, great replacement for your drill tools..
  • HANDEL DIFFERENT MATERIAL: These milling cutters can be used to drill many items or materials, such as circuit boards, hardware parts, plastics, copper and stainless steel..
Check Stock

Genmitsu 6pcs 3-Flute Square End Mill for Aluminum Applications, Nano Blue Coat CNC Router Bits, High Feed U-Type Design, for Roughing and Finishing, 1/4’’ Shank, SN06A

  • High Quality: The Genmitsu end mills are made of Tungsten Carbide Steel and 0.2um ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating provides high hardness and heat resistance enabling the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
  • Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
  • Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
  • Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
  • Attain excellent production rates thanks to the strong tooth with double relief angles..
  • Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machin....
Check Stock

DCT Dust Collector Accessories Kit – 1.25in x 10ft Vacuum Hose, Dust Collection Fittings, and Vacuum Reducer

  • ENHANCE DUST COLLECTOR EFFICIENCY: Create a vacuum system with the DCT | Woodworking Dust Collection 1.25” x 10’ Dust Hose with Fittings & Reducers and use to collect shavings and dust from your woodworking power tools.
  • Use as the last stage from your dust collector to your tool with 2.5-inch (6.4cm) ports with 1.5-inch (3.8cm) accessories.
  • Shopvac hose pairs with dust extractors and dust collection systems (not included) to prevent dust buildup.
  • PERFECT SIZE: 1.25-inch (3.2cm) outside diameter (OD) and 1-inch (2.5cm) inside diameter (ID) with a 1.2-inch (3cm) OD and 1-inch (2.5cm) ID small end fitting, 1.75-inch (4.4cm) OD and 1.5-inch (3.8cm) ID large end fitting, and 2.5” x 1.5” inch (6.4cm x 3.8cm) reducers to fit your attachments (measure application to ensure fitment).
  • 10-foot (3m) long vacuum hose for ample room to reach your equipment.
  • Small diameter for flexibility and maneuverability.
  • LET THE MAGIC HAPPEN: Included fittings screw into each end of the shop vacuum hose and fit snugly with the fittings on your existing power tools.
  • The small end of the dust collection pipe is ideal for connecting a random orbital sander, palm sander, biscuit joiner, or any other power tool with small dust collect....
Check Stock

Kreg KBC6 Automaxx Bench Clamp, 6 Inch

  • WOODWORKING HOLDFAST SET: Quickly clamp down your woodworking projects with the DCT | 8 Inch Woodworking Bench Accessories Workbench Holdfast 2 Pack Set.
  • For hundreds of years, bench hold fast hooks have been used to secure wood projects while cutting, carving, and sanding because of their versatility and ease of use.
  • Skip the complicated leg vise hardware and standard clamps that are difficult to adjust and use these simple workbench hold downs.
  • IDEAL FOR VARIOUS WOODWORKING JOBS: Use these work bench clamps for woodworking projects.
  • Hold downs for woodworking provides a strong, sturdy hold to allow hands-free carving, routing, sanding, planing, sawing, drilling, and finishing.
  • Protect softwood from marring by using a piece of scrap wood as padding between your holdfasts and the workpiece.
  • USE WITH YOUR WORKBENCH: Works best on workbenches with a 2.5 (6.4cm) thickness.
  • Drill 3/4 inch (1.9cm) vertical dog holes into your workbench top and slide your holdfast workbench clamps into the hole.
  • We suggest filing the shank to increase hold security.
  • PERFECT SIZE FOR YOUR NEEDS: Constructed of drop-forged steel provides these hold fast clamps with maximum durability and strength.
  • 8-inch(20.3cm) length with 3/4-inch (1.9cm) diameter shaft fits your workben....
Check Stock