Reviews Servo Connector Board

uxcell RC Products 4 Way Servo Wire Extension Cord 30 Core 168mm 3 Pin in Brown/Red/Orange 2pcs

Used for: RC car, RC plane and RC helicopter servo connection or receiver connection..
Feature: 4 way,1 male to 3 female cable splitter..
Parameter: 30 core, 6.61Inch / 168mm long, 3 pin, pin pitch : 2.54mm..

Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
2.You should connect higher power supply for higher-power servo.
3.Make sure servo are connected properly, otherwise they will not move..
Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..

WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A..
STABLEPERFORMANCE：Stable and shock-proof iron core motor, metal gears, power supply through external adapter..
Tips: If you’re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal..

Package Content: 10 x Steel Z Push Rods, 10 x Adjustable Pushrod Connector, 1 x Hex Wrench..
Push Rods Diameter: 1.2mm/0.047", Push Rods Length: 450mm/17.7".
Pushrod Connector: Diameter of the Hole:1.2mm, Fit Pushrods 0.8-1.2mm..
Pushrod, easy to bend to fit the angles that you need, compatible with the micro servos and projects..
The Steel Push Rods Parts are used for connection between servo and servo horn..
Metal Quick Adjuster comes with a hex wrench, easy to install..

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase)..
The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor, Metal Gear..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees..
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

12g Mini Metal Gear Servo, 180 degree rotation, high sensitivity, stable and low-noise..
The rc servo's operating voltage: 4.8V~6.0V.
Connector type: Futaba/JR compatible, Compatible with all SCX24 models..
Wide range of application: Exquisite part, perfect for RC Helicopters KT, fluttering, gliding, small robots, and other models.Wide range of application: Exquisite part, perfect for RC Helicopters KT, fluttering, gliding, small robots, and other models..

【Package】Package included 6 sets MG996R metal gear servo motor+25T Disc metal horns..
【Updated version】MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed of MG996r is faster, the accuracy is much improved and the tension is increased..
【Quality】180°rotation high torque,Stable and shock proof and also of high speed.Can compatible with most standard receiver connector: Futaba, Hitec, Sanwa, GWS, etc..
【Parameter】Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
Operating Speed : 0.17sec / 60 degrees (4.8V no load).
Operating Speed : 0.13sec / 60 degrees (6.0V no load)..
【Application】Biped robot/manipulator/remote control car, suitable for 50-90 grade methanol fixed-wing~aircraft and 26cc-50cc gasoline fixed-wing aircraft and other models..

Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter..
This servo offers a full range of 180° with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments..

This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
Connector wire length 300mm. Stable and shock proof double coreless motor, metal gear, ball bearing design,Through external adapter..
Torque at 6V 12kg/cm, 7.2V 13kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
This servo offers a full range of 180 with metal gears. Application:RC robot, airplane control, robot arm and boats. Fit for all kind of R/C toys and Arduino experiments..