Reviews Sds Max Cross Tip

Diablo 2-5/8 in. x 7 in. SDS-Max Carbide Tipped Core Bit

  • Carbide teeth withstand impact and high heat applications for superior life and productivity versus standard core bits.
  • Peak Point Tip design for aggressive starts that produce clean, fast holes. Off-set carbide teeth produce fast, clean holes..
  • One piece design strengthens the bit extreme impact resistance and stability.
  • For drilling large holes up to 4 in. diameter.
  • Maximum performance in SDS-Max rotary hammers.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Sabre Tools 8-Piece SDS Plus Drill Bit Set, Carbide Tipped, Rotary Hammer Drill Bits for Brick, Stone, Concrete

  • 8-Piece SDS Plus Drill Bits Set - Includes: 3/16” x 4”, 1/4” x 4”, 5/16” x 4”, 5/16” x 6”, 3/8” x 6”, 1/2” x 6”, 5/8” x 6”, 3/4” x 6”.
  • Our high quality SDS bits are designed to work in masonry applications.
  • brick, stone, concrete, block, stucco, etc..
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • Drilling speed – Sabre’s SDS hammer drill bits feature 2-flute self-centering carbide tip ensuring fast cut speeds and accurate holes.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the bit to remain cool.
Check Stock

DEWINNER Rotary Hammer Drill,1-1/4 Inch with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels, Point Chisels, Drill Chuck

  • ... to variety of work scenarios which are easy to switch. The double function switch design can extend 100% service life compared with single function switch design..
  • 【ERGONOMIC DESIGN】 DEWINNER rotary hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • 【DRILLING CAPACITY】DEWINNER rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/2 inch drilling diameter. The best drilling diameter 16/25-22/25 inch.DEWINNER rotary hammer drill can reach 850 r/min no-load speed and 4400bpm max impact frequency..
  • 【WHAT YOU WILL GET】DEWINNER rotary hammer*1，Depth stop*1，Key-type drill chuck with SDS shank*1，Drill chuck key*1，SDS drill bits (8/10/12 X 250 mm)*3，SDS flat chisel (14 X 250 mm)*1，SDS pointed chisel (14 x 250 mm)*1， Additional handle*1，Transport case*1，Manual*1.
Check Stock

Sabre Tools 3/4 Inch x 39 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (3/4\ x 37\ x 39\)

  • 3/4" x 37” x 39" SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 5/8 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (5/8\ x 16\ x 18\)

  • 5/8" x 16” x 18" SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 5/8 Inch x 39 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (5/8' x 37' x 39')

  • 5/8″ x 37” x 39″ SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Diablo by Freud DMAMXCC5010 2 in. x 7 in. SDS-Max Carbide Tipped Core Bit

  • Carbide teeth withstand impact and high heat applications for superior life and productivity versus standard core bits.
  • Peak Point Tip design for aggressive starts that produce clean, fast holes. Off-set carbide teeth produce fast, clean holes..
  • One piece design strengthens the bit extreme impact resistance and stability.
  • For drilling large holes up to 4 in. diameter.
  • Maximum performance in SDS-Max rotary hammers.
Check Stock