Reviews Screw Thimble Clamp

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

  • Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
  • Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
  • Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....
Check Stock

Mitutoyo 128-101 Vernier Depth Gauge Micrometer Type 0-25mm Range 0.01mm Graduation +/-0.003mm Accuracy 63.6mm x 16mm Base

  • Measurement range of 0 to 25mm, and resolution of 0.01mm.
  • Vernier scale for precise measurements in fine units.
  • Includes 4mm diameter measuring rod, carbide-tipped in certain models.
  • Ratchet stop and measuring rod clamp for precise measurements.
  • Satin chrome finish on the thimble for readability.
Check Stock

4 Pieces Sewing Thimble, Metal Copper Sewing Thimble Finger Protector Adjustable Finger Shield Ring Fingertip Thimble Sewing Quilting Craft Accessories DIY Sewing Tools

  • Material: Sewing thimble finger protector is made of copper, durable and sturdy, not easy to rust and break, convenient for you to use a long time.
  • Size: S size is 2.3*1.5/0.90"*0.59"(L*D).
  • M size is 2.5*1.7/0.98"*0.67"(L*D), 4 pieces fingertip thimble, 2 sizes for each, adjustable thimble for easy fit for most people fingers.
  • Features: Dimpled pattern keeps needle from slipping, adjustable open sided thimble fits your finger comfortably and designed with an open top to keep your finger from perspiring.
  • Funtion: Sewing thimble finger protector is useful sewing tools to protect fingers when the needle is over the cloth, and can exert force well to penetrate clothes.
  • Applications: Quilting thimble are ideal for needlework, sewing, embroidery and so on, a good tool for dressmaker and mothers to protect their fingers well, especially the people who have long finger nails.
Check Stock

Quadow 4 Pieces Sewing Thimble, Metal Copper Sewing Thimble Finger Protector Adjustable Finger Shield Ring Fingertip Thimble Sewing Quilting Craft Accessories DIY Sewing Tools(

  • Material: Sewing thimble finger protector is made of copper, durable and sturdy, not easy to rust and break, convenient for you to use a long time.
  • Size: S size is 2.3*1.5/0.90"*0.59"(L*D).
  • M size is 2.5*1.7/0.98"*0.67"(L*D), 4 pieces fingertip thimble, 2 sizes for each, adjustable thimble for easy fit for most people fingers.
  • Features: Dimpled pattern keeps needle from slipping, adjustable open sided thimble fits your finger comfortably and designed with an open top to keep your finger from perspiring.
  • Funtion: Sewing thimble finger protector is useful sewing tools to protect fingers when the needle is over the cloth, and can exert force well to penetrate clothes.
  • Applications: Quilting thimble are ideal for needlework, sewing, embroidery and so on, a good tool for dressmaker and mothers to protect their fingers well, especially the people who have long finger nails.
Check Stock

POWERTEC 71438 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 1/4 Inch hex head Bolts – 2 Pack

  • INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
  • FUNCTION: Designed to fit any standard t-track that accepts 1/4” hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
  • VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
  • CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Compatible with Kreg, Incra, Peachtree Mini and other ¼” T Track..
  • PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check Stock

POWERTEC 71439 T-Track Clamp Vice | Hold Down Clamps for T-Tracks Accepting 5/16” or Larger hex head Bolts – 2 Pack

  • INCLUDES: (2) Screw Vice Hold Down Clamps for T-Tracks.
  • FUNCTION: Designed to fit any standard t-track that accepts 5/16”or Larger hex head bolts – these screw type clamps will slide into your t-track and quickly secure your workpiece with a twist of the knob.
  • VERSATILITY: Works seamlessly with an assortment of applications, including router table, drill press, saws and jig assemblies.
  • CLAMP CAPACITY: Able to securely hold 1/4” to 2” thick woodworking stock. Works with all universal and heavy duty..
  • PREMIUM BUILD: Each hold down clamp features an ergonomic design with a plated steel clamp screw and foot with a soft plastic non marring cap, paired with an anodized aluminum body and round 1-1/2” clamping screw knob.
Check Stock

C-Clamp 2 Inch 14 Pieces G Clamp Set for Woodworking Welding and Building 2 Inch Jaw Opening Throat Depth 1-3/8 Inch

  • STRENGTH C-CLAMP Using thick malleable steel material, electrophoresis black paint treatment, durable and moisture-proof.
  • TRAPEZOIDAL THREADED SCREW is galvanized, with large torque, ensuring strong angle effect.
  • SWIVELING CLAMP PAD floats in a low-resistance ball-and-socket joint to apply pressure evenly and prevents marring while turning the clamp screw.
  • Versatile clamp secures parts for assembly, fastening, gluing and welding, perfect for your metal fabricating or woodworking projects in the garage....
  • Up to 2 inch jaw opening. Up to 1-3/8 inch throat depth, 14 piece C-clamp set.
Check Stock

53pcs Cable Clamps Assortment Kit, 304 Stainless Steel Rubber Cushion Pipe Clamps in 6 Sizes 1/2'' 1'' 1.25'' 1.5'' 1.75'' 2''

  • The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site..
  • Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding..
  • The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange..
Check Stock

BEAMNOVA 3PCS 5/8\ CNC Metal Indexable Lathe Tools Sets Holder MTJNR1616H16, MWLNR1616H08, MCLNR1616H12 Blades WNMG431, CNMG431, TNMG331

  • ...wn) and precision are up to the first grade..
  • Turning inserts exquisite workmanship, high strength, high toughness, stable and durable..
  • (1)MTJNR1616H16 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 93°. Shim: ST 1603. Pin: MCT513. Clamp: HL 1814. Clamp Screw: MCS625. Wrench: L2.0, L3.0. Matching Inserts Model Number: TNMG 331. Matching Inserts Length: 16 mm (5/8 in). Matching Inserts Thickness: 4 mm..
  • (2)MWLNR1616H08 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SW 0804. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS625. Wrench: L2.5, L3.0. Matching Inserts Model Number: WNMG 431. Matching Inserts Length: 8 mm. Matching Inserts Thickness: 4 mm..
  • (3) MCLNR1616H12 : Shank Diameter (Length × Width): 16*16 mm (5/8 * 5/8 in). Overall Length: 100 mm (4 in). Main Declination: 95°. Shim: SC 1204. Pin: MCT617. Clamp: HL1814. Clamp Screw: MCS625. Wrench: L2.5, L3. Matching Inserts Model Number: CNMG 431. Matching Inserts Length: 12 mm (1/2 in). Matching Inserts Thickness: 4 mm..
Check Stock