Reviews Saw Blade Laser Guides

GALAX PRO 4Amp 3500RPM Circular Saw with Laser Guide, Max. Cutting Depth1-11/16'(90°), 1-1/8'(45°）Compact Saw with 4-1/2' 24T TCT Blade, Vacuum Adapter, Blade Wrench, and Rip Guide

  • Powerful circular saw: 4-amp electric motor – delivers a no load speed of 3,500 rpm – easily cuts through wood, PVC tubing, laminate flooring, plastic, plasterboard and MDF. Includes an 24T Tungsten Carbide Tipped Blade 4-1/2 in diameter. Arbor Size: 3/8in.
  • Laser guide and bevel lever: This mini saw comes with laser beam guide and the scale ruler, which can assist you to cut a straight line for when high precision is needed. Accurate cuts are assured by the parallel guide and laser light. Angle adjustment for bevel cuts of up to 45°.
  • Depth gauge lever and dust extraction system: This mini circular saw can adjust the cutting depth anywhere from 0 to 1-11/16"(42.8mm) with a max. cut of 42.8 mm in order to adapt to perform better when cutting different materials. Leave your working area free of dust with the vacuum adaptor, for more precise cuts and helping you to focus on the task without the mess.
  • Compact & handy circular saw: Compact body and lightweight perfect for one-handed operation.
  • it features ergonomic soft handles for better hand-feeling and provides optimum cutting line visibility for tight detail work.
  • What you get: 1* Mini Circular saw, 1* 24T tungsten-carbide-tipped wood/plastic blade, 1* allen key for saw change, 1* rip guide, 1* v....
Check Stock

OUTDOOR EDGE Razor-Guide Pak, Includes RazorBone & RazorCape Replaceable Blade Knives & Flip N Zip Saw, all in a Compact Waxed Canvas Roll Pack

  • THE ULTIMATE GUIDE PACK KNIFE & SAW COMBO – Combines the necessary tools for hunters in a compact waxed canvas roll pack. Featuring two RazorSafe replaceable blade knives and a saw, the RazorGuide Pak is ready to meet the demands of even the most experienced guides..
  • TWO RAZORSAFE REPLACEABLE KNIVES – The RazorBone comes equipped with 3.5" blades, gutting blade and 5.0" boning/fillet blades bring your harvest from the field to table with a single knife. The RazorCape steps in with the 3.0" caping blade that breezes through intricate cutting tasks with surgical precision..
  • NEVER SHARPEN YOUR KNIFE AGAIN – Change blades fast and easy! When a blade goes dull, simply push the lock release button in the handle to remove and insert a shaving-sharp new one.
  • Includes two 3.5-inch blades, one 3.9-inch gutting blade, two 5.0-inch boning/fillet blades, and two 3.0-inch caping blades total. Additional replacement blade packs are sold separately..
  • RUBBERIZED TPR KNIFE HANDLEs – Blaze orange nonslip TPR handles are mounted to a sturdy 420J2 stainless steel frame for unparalleled strength and durability while providing a secure grip, even in the slickest conditions..
  • ALUMINUM HANDLE FOLDING SAW – 4.4-inch aluminum handle folding saw with triple-grou....
Check Stock

Cramer 40407US Silicone Profiling Kit7 – professional Caulking Tool Kit with Sealant Finishing Tools and Caulk Removal Tools – easy silicone caulking with guides

  • The Original: CRAMER Profiling Tools – made in Germany. Professional Tool Kit for removal and renewing silicone joints. Kit contains 5 sealant finishing tools, 2 guides and a caulk removal tool with 3 interchangeable metal blades. Everything in a practical storage box..
  • Removal of old sealant: Old silicone joints can be removed with the CRAMER silicone removal tool and the saw blade, for residues use the scraping blade (incl. replacement blade)..
  • Simple silicone caulking with guides: 5 sealant smoother with 16 needed profile variants and 2 guides. The cleverly attached guides help bridging intersections and prevent any subsidence when working at these intersection grout lines. All sealant tools have tool edges at 90° angle: The only way to ensure that the corners are also properly grouted!.
  • Processing without soapy water: The caulking is carried out much easier in small sections – additionally, blemishes can be simply reworked without removing the existing joint..
  • With this Kit the most complex silicone profiling becomes child's play. Delivered in a practical plastic box – all tools stored in one place, so that nothing gets lost!.
Check Stock

Mini Circular Saw, TECCPO 5.8A Circular Saw with Laser Guide, Fine Copper Motor, Max Cutting Depth 1-11/16'' (90°), 1-1/8\ (45°), 3 Blades for Wood, Soft Metal, Tile Cuts - TPMS115A

  • 【POWERFUL 3500 RPM COPPER MOTOR】- Featured with a powerful 5.8 Amp copper motor delivers 3,500 RPM no-load speed for cutting wood, soft metal, tile, aluminum, plastics, and PVC tube with ease. With 3 saw blades: 1 x 24T TCT ( 115mm ) for wood / 1 x 60T HSS ( 115mm ) for soft metal / 1 x grit diamond blade ( 115mm ) for tile, which can satisfy all your versatile needs of this compact circular saw..
  • 【0°-45° BEVEL CUTTING & VARIABLE BLADE DEPTH】- TECCPO compact circular saw allows you to freely adjust the cutting angle from 0° to 45°. Cutting depths can also easily be adjusted to a max cutting depth of up to 1-11/16" at 90° and 1-1/8" at 45°. The angle and depth adjustment helps you do various cutting in woodworking..
  • 【PRECISE LASER GUIDE & DUST COLLECTION】- The built-in red laser guide and scale ruler ensures a precise straight line. Greatly improve your work efficiency and cutting performance. A built-in dust port and included vacuum adapter allow for connection to a shop-vac or dust collection system, helping you to maintain a cleaner work environment..
  • 【ERGONOMIC & SAFETY DESIGN】- Compared to conventional circular saws, its lightweight and compact design makes it portable to carry both indoor or outdoor. The rear motor position en....
Check Stock

Overpeak 10 inch Circular Saw Blade, 80 Tooth ATB Finishing Saw Blades with 5/8-Inch Arbor, Laser-Cut Thin Kerf and Anti-Rust Coating

  • ▲Material – OVERPEAK saw blades made of tougher tungsten carbide for up to 5x longer cutting life than other saw blades.
  • ▲Alternate-Top Bevel Teeth – The 10 inch saw blade with unique tooth design provides straight cuts and cutting smoother.
  • ▲Low Noise & Cutting Stable – 4 Laser cut expansion slots vents trap noise and vibration, keeping it cool and reducing blade warp.
  • ▲General Usage – The Overpeak 10 inch carbide blade is 80 tooth and suitable for ripping wood, crosscuts wood, plywood, and laminate.
  • ▲Thin kerf – Thin kerf for fast and smooth cutting action and minimum waste. If you have any problem with our 10 inch saw blade, pls tell us freely.
Check Stock

Worx WX420L 3 Amp Versacut 3-3/8' Electric Compact Circular Saw with Laser Guide Technology

  • [CUTS ALMOST ANYTHING] Wood, aluminum, tile, even vinyl siding—the motor spins the blade at 3500/min so you can slice through most materials with ease.
  • [EASIER TO GRAB] The slim design makes the Versacut a circular saw you can operate with just one hand. Full-size circ saws can be cumbersome—just grab this saw and go.
  • [WELL BALANCED] The rear motor construction gives this tool nice balance, so you’ll make more precise cuts.
  • [QUICK DEPTH ADJUSTMENTS] Just flick the knob up or down to find the depth you need for the project at hand, with a max cutting depth of 1-1/16”.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] Worx tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.
  • [LASER GUIDELINE] Once you get used to the straighter cuts you get from using a laser guideline you won’t want to go without one.
  • [DUST EXTRACTION] Hook up your favorite shop vac to the dust extraction port and suck the sawdust and debris out of the air as you work.
  • [FULL METAL GUARD] It’s dent-resistant, built to last for a long, long time, and makes rip and plunge cuts easy to execute.
  • [INCLUDES] 3-3/8” AC Versacut Saw, 24 TCT Blade, Diamont Grit Blade, HSS ....
Check Stock

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

  • ...r hands above and away from the saw blade..
  • THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!.
  • USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut..
  • COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assembly required. Other push blocks require frustrating installation with tons of moving pieces.
  • LIFETIME WARRANTY- Delmar Tools includes a lifetime warranty on this pushblock. Any issues down the line and you will be covered for a free replacement or a refund..
Check Stock

Freud D0624X Diablo 6-1/2-Inch 24-Tooth ATB Framing Saw Blade 5/8-Inch Arbor (4 Pack)

  • Bundle Includes: 4 x Freud Diablo 6-1/2-Inch 24-Tooth Framing Saw Blade with 5/8-Inch Arbor.
  • Freud's TiCo Hi-Density Carbide: With Titanium for long life and a flawless finish with Super thin laser cut kerf gives extremely fast, durable, and clean cuts.
  • Laser-Cut Stabilizer: Vents trap noise and vibration keeping the blade cool and reducing blade warp.
  • Non-Stick Perma-Shield Coating: Reduces gumming, rusting, and corrosion.
  • Laser Cut Arbor: For accurate blade rotation reducing vibration and premature wear.
Check Stock

Mini Circular Saw, ENVENTOR 4.8A Compact Circular Saw, Laser Guide, 4000RPM with 3 Saw Blades 3-3/8" Max Cutting Depth 1-1/16", Ideal for Wood, Soft Metal, Tile and Plastic Cuts

  • 【POWERFUL MOTOR AND COMPACT SAW】580W/4.8Amp powerful motor provides 4000RPM No-Load Speed for cutting wood, metal, tile, aluminum plastics, and PVC tube with ease. 3 Blades: 1x24T TCT(85mm) for wood cuts/ 1x44T HSS(85mm) for wood and soft-metal cuts/ 1 grit diamond blade(85mm) for tile cuts, extending the applications of the compact circular saw. Great tool for home decoration and the perfect gift for woodworking and DIY lovers..
  • 【CUTTING DEPTH】ENVENTOR mini circular saw Cutting depths of up to 1-1/16", The Left-sided blade design gives you a clear sight of the cutting line. A parallel guide attachment ensures straight, precise cuts easily and quickly..
  • 【PRECISE LASER GUIDE and SAFE DESIGN】Legible laser guide can assist you to cut a precise straight line. Greatly improve your work efficiency. The gauge iron wraparound base and aluminum upper cover for improved safety. The double safety button offers double protection, in case of any accidental start up. Grip with integrated safety trigger for safer control..
  • 【ERGONOMIC & SAFETY DESIGN】Compared to conventional compact circular saw, its lightweight and compact design makes it portable to carry both indoor or outdoor. The double protection switch prevents the machine from accidentally openi....
Check Stock