Reviews Ring Terminals Solder

AIRIC 12-10 Gauge Ring Terminal 5/16 inch Gold Plated Crimp Ring Terminals with Soft Boots Gold Wire Connectors Kit 12-Pack

  • SIZE: 12-10 gauge wire connectors 5/16" ring hole, 12 PCS (6 positives, 6 negative).
  • GOLD Plated Finish: Heavy-duty and gold plating surface for maximum conductivity.
  • PREMIUM Ring Terminals: Gold ring terminals are well made with brazed seam craft, which keeps its durability, security, and beauty.
  • COLORED Soft Boot: Insulated wire ring terminals come with red and black soft boot, which will protect the crimped wire end and identify the polarity easily.
  • WIDE Usage: As it's perform well in anti-shock and corrosion resistance, these crimp ring connectors widely used in car, battery, audio system, etc. It will easily connect your battery to your system's amplifier with these high-quality ring terminals..
Check Stock

Battery Tender Ring Terminal Accessory Cable and USB Charger Adaptor by Deltran - 081-0174

  • EASY TO USE: Charge your USB connected devices with your 12V battery.
  • PORTABLE POWER: Connect the ring terminals to your battery and the USB charger adaptor to the ring terminals and charge.
  • MULTI-USE: Ring terminals can also be used with other Battery Tender chargers. Cord is 18 inches long, contains 7.5 AMP fuse, 16 AWG.
  • INCLUDES: USB charger adaptor and 18-inch ring terminal quick disconnect cord.
Check Stock

SELTERM 6 AWG 5/16' Stud (Wide Pad) (10 pcs.) UL Marine Grade Battery Ring Terminal 6 Gauge Connector, Tubular Electrical Wire End Cable Lugs, Tinned Copper Eyelets [B24], MD0656PW / MDS0656PW

  • ...uge) 16 sq. mm Cable & 5/16" (M8) Stud. SKU: MDS0656PW-10, Part no: MD0656PW.
  • Approved by OEMs, our tinned copper wire lugs are corrosion free.
  • ideal for marine, automotive or outdoor use.
  • salt spray tested to ASTMB117 standard. Special matte tin plating make these lugs as easy to Solder as it is to Crimp.
  • These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • Designed for durability, and tested to meet S.A.E conductivity standards J163 & J1811.
  • UL listed to U.S. & Canadian saftey standards and rated to 600V+ when properly installed.
  • These products are listed under UL File Number E254830.
  • Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications.
  • Audio wire may not be a direct fit. Recommend to check product dimensions to ensure a proper fit.
Check Stock

SELTERM 2 AWG 3/8\ Stud (10 pcs.) UL Heavy Duty Battery Ring Terminal 2 Gauge Connector, Tubular Electrical Wire End Cable Lugs, Bare Copper Eyelets [B49], MD0238U / MDS0238U

  • Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. This particular variant has a 3/8" Eyelet suitable for use with 2 AWG (2 Gauge) 35 sq. mm Cable & 3/8" (M10) Stud. SKU: MDS0238U-10, Part no: MD0238U.
  • Approved by OEMs, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.
  • These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • Designed for durability, and tested to meet S.A.E conductivity standards J163 & J1811.
  • UL listed to U.S. & Canadian saftey standards and rated to 600V+ when properly installed.
  • These products are listed under UL File Number E254830.
  • Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications.
  • Audio wire may not be a direct fit. Recommend to check product dimensions to ensure a proper fit.
Check Stock

SELTERM 4 AWG 3/8\ Stud (10 pcs.) UL Heavy Duty Battery Ring Terminal 4 Gauge Connector, Tubular Electrical Wire End Cable Lugs, Bare Copper Eyelets [B35], MD0438U / MDS0438U

  • Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. This particular variant has a 3/8" Eyelet suitable for use with 4 AWG (4 Gauge) 25 sq. mm Cable & 3/8" (M10) Stud. SKU: MDS0438U-10, Part no: MD0438U.
  • Approved by OEMs, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.
  • These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • Designed for durability, and tested to meet S.A.E conductivity standards J163 & J1811.
  • UL listed to U.S. & Canadian saftey standards and rated to 600V+ when properly installed.
  • These products are listed under UL File Number E254830.
  • Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications.
  • Audio wire may not be a direct fit. Recommend to check product dimensions to ensure a proper fit.
Check Stock

SELTERM 2/0 AWG 5/16' Stud (5 pcs.) UL Heavy Duty Battery Ring Terminal 00 Gauge Connector, Tubular Electrical Wire End Cable Lugs, Bare Copper Eyelets [B77], MD2056U / MDS2056U

  • Selterm bare copper battery cable ends are made from 100% annealed copper, providing a high degree of conductivity for maximum current flow. This particular variant has a 5/16" Eyelet suitable for use with 2/0 AWG (00 Gauge) 70 sq. mm Cable & 5/16" (M8) Stud. SKU: MDS2056U-5, Part no: MD2056U.
  • Approved by OEMs, our electrical wire ring connectors are designed with a heavy duty construction for high temperature durability and enhanced mechanical strength.
  • These ring terminals have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • Designed for durability, and tested to meet S.A.E conductivity standards J163 & J1811.
  • UL listed to U.S. & Canadian saftey standards and rated to 600V+ when properly installed.
  • These products are listed under UL File Number E254830.
  • Freedom to choose from a variety of wire sizes, stud sizes & pack quantities, that fit your requirements and applications.
  • Audio wire may not be a direct fit. Recommend to check product dimensions to ensure a proper fit.
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock