Reviews Quick Disconnect Couplers For Water

Parker Hannifin 9500-4 Agricultural Tractor Clamp Kit with Pioneer Lever Actuated Quick Coupler and Dust Cover Housing 1/2 Body Size 1/2 -14 NPTF Port End

  • Clamp has steel mounting bar with heavy duty die cast yoke to securely hold the couplers.
  • Dust protection housing has color coded covers that automatically close when couplers are disconnected, to keep dirt from easily entering the coupler....
  • Connect and disconnect couplers with minimal effort while lines are under pressure.
  • Lever locks valves in open position to be unaffected by pressure surges and prevent flow checking.
  • Lever locks valves in closed position to enable easy connection and disconnection while lines are under pressure.
Check Stock

Summit Hydraulics 1/2\ Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers/Couplings Set w/Dust Caps

  • This Universal Quick Disconnect Coupler & Plug set features a new improved design for high flow performance and maximum service life..
  • 1/2" NPT Thread, 1/2" Body (see size chart), These flat face couplers connect to models of skid steers loaders including Bobcat, Case / New Holland, Kubota, and many others.
  • Heavy Duty Design with 5076 PSI Rating and 23 GPM Max Flow Rate.
  • Harden Steel Construction with Zinc Nickel Plating Provides Superior Resistance to Corrosion.
  • Valve design that allows for a minimal pressure drops and fluid loss. Locking Sleeve helps prevent accidental disconnects.
Check Stock

3/4\ SAE Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers with Dust Caps,The Universal Quick Disconnect Coupler Bobcat Case/New Holland, Kubota

  • The flat face hydraulic quick connect couplers with 3/4" SAE thread+ 1/2 body, impoved design high flow performance and maximum service life.
  • The universal quick disconnect coupler connect interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota.
  • Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
  • Non-spill flush face valves minimize fluid losses.
  • Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.
Check Stock

MASTERCOOL HVAC Digital Manifold Complete Kit with 72 Standard Hoses MSC-99772-A

  • HIGH QUALITY: High quality rubber make the AC Diagnostic Manifold Gauge Sets Shockproof and shatter-resistant. Aluminum forged MANIFOLD body with (3)....
  • GAUGE PRESSURE RANGE: Burst pressure: 600-3000Psi working/bursting pressure. Blue gauge (low): 0-350 PSI.
  • QUICK DISCONNECT COUPLERS: High & Low pressure fittings included.
  • Each coupler have a shut off valve to prevent loss of refrigerant.
  • CONTENTS: Include 3-Colored 5 Ft/60 Inch Red/blue Charging Hoses, 1/4 Sae fitting on both sides for Red & blue, 1/2 Acme fitting on both sides for....
  • APPLICATION: R134A Professional Manifold Gauge Set. Ideal for R134A, R404A, R407 refrigerants.
  • Designed for AC Freon charging, evacuation (vacuum),....
Check Stock

STYDDI Pressure Washer Quick Disconnect Adaptor Set, M22-15mm to 3/8\ Quick Release Couplers, All Solid Brass Connector Compatible with Sun Joe, Campbell, MI-T-M, Stanley Electric Pressure Washers

  • ALL SOLID BRASS FOR A SAFE AND LEAK-FREE CONNECTION - These quick connect adapters are all made of premium 100% brass, which is corrosion and rust proof. They are durable and sturdy, providing a secure and firm connection without water leak or pressure loss. They are no only convenient for frequent connect and disconnect but also offer a long service life without much maintenance..
  • TOP PERFORMANCE AND WIDE APPLICABILITY - These quick connect adapters provide secure and quick connections between most pressure washer gun, pressure washer pump and pressure washer hose. Their maximum working pressure are up to 5000 psi. They are widely applicable to different brands of pressure washers, such as for Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce and Simoniz..
  • PLEASE PAY ATTENTION - Most electric pressure washer couplers have a bigger internal diameter of 15 millimeters rather than 14. So please check the internal diameter of your pressure washer connection before purchasing, as the one-millimeter difference will cause leaks. If you need any assistance to confirm the internal diameter, please just contact us..
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • ...ve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
  • CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Coupling, 1 x Ball Valve, 1 x Tee Brass Fitting, 1 x Thread Seal Tape, 1 x Female Coupling. All packed in a durable clear storage case for easy organization, carrying and storage..
Check Stock

Ingersoll-Rand SS3J5.5GH-WB 5.5 Horsepower 8 Gallon Oiled Gas Twin Pontoon Compressor

  • Portable Design: Lightweight with excellent manueverability even on the roughest terrain, perfect for environments where electricity is unavailable.
  • Maximum Power and Flexibilty: 100% continuous duty, twin 8-gallon tanks and two quick disconnect couplers enable you to run multiple tools simultaneously.
  • Easy Starting: Features 5.5 hp Honda reliable, easy to start gas-powered engine.
  • Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 5,000 hours of trouble-free use.
  • Reliable Operation: All Season Select synthetic lubricant increases efficiency.
  • with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
Check Stock

1/4 Plastic Hose Barb Beer line Quick Disconnect With Shut Off Beer Tubing and Gas line Check Valve Quick Connector In-Line Set Food Grade Homebrew Kegging…

  • This Food Grade plastic quick disconnect set features 1/4" barb about 7.5MM..
  • Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines..
  • These couplings make it very easy to swap out couplers and other beer and air side accessories..
  • Made of Food-grade plastic with 316 stainless steel springs and NSF approved..
  • The temperature range is -40F to 180F.They can handle a vacuum to 80 psi - so you need not worry about them leaking gas..
Check Stock

Heyiarbeit 1pcs 5Way 1/2\ Manifold Block Splitter Air Hose Inline,Pneumatic Air Compressor Manifold Fitting

  • Total Size: 20.3x3x3cm/8"x1.2"x1.2"(L*W*H).
  • Manifold block is made of Aluminum for less weight than brass and resistance to corrosion. Efficient and stable performance, easy to install and sustainable..
  • The air compressor is equipped with quick connection couplers which is easy to connect and disconnect. Simply thread pneumatic fittings into the ports of the distribution block to produce an organized method of supplying multiple lines from a single source..
  • Air manifold for distributing pneumatic power to multiple locations from a single source..
  • Manifold Block is suitable for air compressor or storage gas equipment branch outlet, or used as supporting parts of machine equipment, generally installed in the gas terminal branch interface or engineering wiring pipeline branch..
Check Stock