Reviews Printing Servo Motor Printing

Silk Red PLA Satin Shiny 3D Printer Filament, 1.75mm Diameter 1kg Spool 2.2lbs for FDM 3D Printers

  • Silk Satin Red Shiny Surface: The Finished 3D Printed Items with Beautiful Red Silk Shiny, Suggest Printing Temperature:220℃, Suggest Heat Bed: 50-60℃.
  • Widely Compatible: Our 1.75mm Silk PLA Refills with High Diameter Tolerance, Design to Fit Most FDM 3D Printers on Market, Manufactured with Clog-Free Production Line to Guarantee a Smooth & Stable Printing Experience.
  • Tangle-Free & Easy to Print: All Filament Produced by Servo Control System, To Guarantee Silk PLA Material with Consistency Diameter, 100% Tangle-Free During Production, No Bubbles, Strong Toughness, Print Much More Smoothly.
  • Package & Extra Free Gift: Filament Net Weight is 2.2lbs/Spool, Vacuum Sealed with Desiccants in Re-Sealable Bag, with One Small Bag of Filament Sample Packed Together.
  • 100% Satisfy Warranty & Notice: Buy with Confidence, 100% Satisfaction Guarantee. Email us if You Have any Questions, We will Make Every Effort to Provide You with Immediate Help until You are Satisfied.
Check Stock

AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check Stock

Official FLSUN V400 3D Printer Fast 400mm/s 8000+ mm/s² FDM Delta 3D Printer with Pre-Installed Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ300x410mm

  • 【400mm/s High Speed Printing & 8000+ mm/s² Acceleration & Pre-installed Klipper Firmware Pad.
  • 】 Equipped 3 x 48W High Power stepper motor and Pre-installed Klipper Firmware Pad support a normal printing speed of Flsun V400 3D Printer up to 400mm/s and 8000+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 400% faster than industry standard, enable you save more than 70% of printing time..
  • 】 Large printing volume Φ11.8"（Diameter）x 16"(H) / Φ300mm（Diameter）X410mm..
  • 【High-Speed Integrated Dual-Axis Linear Guide.
  • 】 High-precision Dual-Axis linear rail guide, providing higher printing accuracy and stability, and lower noise..
  • 【All Metal Direct Drive Extrude & 300℃ High-temp Nozzle Support Printing of Various Filament.
  • 】 All metal direct drive extrude comes with the pushing force up to 70N, Ultra light weigh only 135g, To meet the high-speed printing requirements of 400mm/s 8000+ mm/s² acceleration, Especially suitable for printing with flexible consumables and hard consumables such as PL....
Check Stock

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

  • [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
  • [Interface type] This SG90 servo is compatible with JR & Futaba interface.
  • [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
  • [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock

Official FLSUN V400 3D Printer Fastest 400mm/s 8000+ mm/s² FDM Delta 3D Printer with 7" Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ11.8x16 Inch

  • Equipped 3 x 48W High Power stepper motor and Pre-installed Klipper Firmware Pad support a normal printing speed of Flsun V400 3D Printer up to 400mm/s and 8000+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 400% faster than industry standard, enable you save more than 70% of printing time..
  • Large printing volume Φ11.8"（Diameter）x 16"(H) / Φ300mm（Diameter）X410mm..
  • FLSUN Speeder Pad & High-Speed Integrated Dual-Axis Linear Guide.
  • Pre-installed Klipper Firmware 7 Inch FLSUN Speeder Pad Support Wifi Remote control & Wide-angle IPS. High-precision Dual-Axis linear rail guide, providing higher printing accuracy and stability, and lower noise..
  • All Metal Direct Drive Extrude & 300℃ High-temp Nozzle Support Printing of Various Filament.
  • All metal direct drive extrude comes with the pushing force up to 70N, Ultra light weigh only 135g, To meet the high-speed printing requirements of 400mm/s 8000+ mm/s² acceleration, Especially suitable for printing with flexible con....
Check Stock

AGFRC 55KG Digital-Steering-Servo High-Torque Programmable - Full Metal Gear Brushless Servo for 1/8 1/10 RC Models, Control Angle 180° (A86BHM)

  • 【UPGRADED & PROGAMMABLE】This upgrade high torque servo is programmable by the AGF-SPV2/V3 servo programmer (not Include) to change the torque, speed, angle, etc..
  • 【HIGH PRECISION & MONSTER TORQUE】Stable, low noise, dust-proof, advanced linearity and accuracy. The maximum torque of this steering servo is up to 55kg/cm (764oz-in) @8.4V and speed up to 0.110sec/60°@8.4V. Size: 40*20*41.5mm(1.57*0.79*1.63in).
  • 【HIGH QUALITY & PERFORMANCE】Standard 55KG high torque servo equipped with patent reinforced steel gear with PINS, three ball bearing, full Aluminium housing with groove surface for fast heat dissipation, accuracy with precision potentiometer..
  • 【APPLICATION & 180 DEGREE ROTATION】AGFRC RC steering digital servo motor uses high-precision production technology to reduce production deviation and improve product tightness, ideal for 1/8 1/10 Buggy /Monster Trucks/RC car/boat/plane/helicopter/robot..
  • 【SATISFIED CUSTOMER SERVICE】Please read the detail description of this RC car brushless servo motor first, if any ideas about our high torque digital servo, contact us first & We will provide you a better solution, and make you satisfied..
Check Stock

COMGROW Creality Ender 5 Plus 3D Printer with BL Touch Tempered Glass Plate and Touch Color Screen Large Build Volumn 350x350X400mm

  • Auto Bed Leveling Pre-Installed - You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic....
  • Ultra Large Printing Format - Meet more of your printing requirement. Your idea should not be confined. Achieve better print results and a larger....
  • Solid Cube Frame - Dual Y-axis synchronization and equipped with a 42-48 motor. Strong power support and smoother transmission lexible and reliable.....
  • Easy to Install & Use - Ender 5 Plus comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic....
  • Printing Resume & Filament End Sensor - Safely protect the power supply.with this function can help achieving long time printing. To avoid occasional....
Check Stock

SUNLU 250g Silk Filament 1.75mm, Neatly Wound 3D Printer Filament，Great Easy to Print for 3D Printers, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 5 Rolls, Brass+Red Copper+Bronze+Green+Pink

  • ①【Large Build Volume】→ SUNLU latest FDM 3D printer S8 Pro, 310x310x400mm printing size, no need to print items in batches, save time, facilitate printing more large pieces, big size creates infinite possibilities.
  • ②【Silent Motherboard】→ SUNLU’s upgraded printer comes with a new silent motherboard and a stable high-performance drive motor, it can effectively reduce noise, no excessive noise during printing..
  • ③【Quick Installation】→ S8 Pro is a pre-assembled printer, just fix the gantry and start printing. Disassembly is also simple, it’s convenient for users to upgrade and build their own printers(open source)..
  • ④【Resume Printing】→ High-end detection module, real-time detection and identification of filament loading state, instantaneous response to suspend printing within 1 second after filament run-out..
  • ⑤【High Compatibility】→ SUNLU’s new version printer S8 Pro is compatible with many kinds of FDM printing filaments in the market, including PETG, ABS, TPU, Wood Fiber, Carbon Fiber, PLA filament, etc..
Check Stock

6-Pack MG996R Servo,Aideepen Metal Gear High Speed Torque Servo Digital Servo Motor for Smart Car,Robot,Boat,Helicopter,DIY

  • ✔️【Updated】MG996R micro servo motor, updated from SG90 micro servo and MG90S micro servo motor, increase the speed, tension and accuracy..
Check Stock