Reviews Portable Cnc Plasma Cutter

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...ce cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectively provide cooling, and extend the working life of consumables..
  • ✅【Warranty Service】We are a manufactory with 10 years' experience of professionals producing the plasma cutter machines,the buyer can get free service within 1 year if machine have any problems,and get a local supports for any assistance,This is an amazing tool for the price! Great product and fantastic service!Accessories are also easy to find in the market, So,please add to cart and take it without hesitation..
Check Stock

STV Motorsports CNC Plasma Table - Made in the USA (SparX510-5x10)

  • HIGH END TECHNOLOGY: The STV CNC Plasma Cutting Tables offer the best technology and high-quality components.
  • USED for MANY APPLICATIONS: Our CNC Plasma Cutting Machines works for a wide range of applications, using a Windows – based software (software package and license included0.
  • CONSISTENCY and SPEED: The STV CNC SPARX Series Plasma Tables are using high accuracy stepper motors for speed, control and smooth operation.
  • it will offer you excellent consistency and speed.
  • VERY DURABLE and MADE in the USA: Our tables are built tough and designed to easily handle 3/4” steel plates (but they can handle more).
  • LIFETIME SUPPORT PACKAGE: 1 Year Warranty and Lifetime Customer Support, Setup and Installation Support, Tutorials and Videos, How-to’s Manuals.
Check Stock

Foot Pedal for Plasma Cutter Welder Amp Control 5 Pin Lotos FP05 for Plasma Cutter and Welder Combos CT520D LTPDC2000D

  • Foot pedal for Lotos plasma cutter and welder combos CT520D LTPDC2000D.
Check Stock

Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown

  • ★ PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs.
  • The LT5500D is an excellent choice for home DIY jobs and light duty small business projects. ★ Non-HF--Non-HF Blowback Start, there is no HF interference..
  • ★ CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output. Non-HF Blowback Start, there is no HF interference on your CNC computer..
  • ★ SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector save your time to connect the torch to your plasma cutter. The whole machine can be setup quickly within 1 min..
  • ★INPUT: Automatic Dual Voltage 110~125V or 215~245V. Fully Output Circuit Breaker Requiement: 110V @ 50A and 220V @ 40A. Air Compressor Requirement: 70 PSI @ 4.0SCFM. ★OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1....
Check Stock

WeldingStop 9-8215 9-8210 SL60 SL100 Plasma Torch Electrode Nozzle 60A Tip for Thermal Dynamics Cutmaster 52 SL60 Consumables PKG/10 [Hafnium & Copper Electrode 9-8215]

  • ✓Use Hafnium wire and Copper to make 9-8215 electrodes——The electrode uses hafnium wire and copper as the main materials. Unlike other products on the market that use cheap Pickaxe wire. the service life of the electrode using hafnium wire is longer than other electrodes using pick wire.
  • ✓CutMaster Cutter—— The plasma cutter spare parts kit are fitting in Thermal Dynamics CutMaster 52 / 82 / 102 / 152 Cutter SL60 / SL100 Torch；These electrodes and tips are fitting in plasma Torches 2CZF1 and 2CZF2.
  • ✓Package Including—— 5pcs 9-8215 electrodes and 5pcs 9-8210 standoff tips WS OEMed.
  • ✓Plasma Cutting Current—— These plasma consumables can be uesd within 60A plasma cutting.
  • ✓Replacement Parts—— These electrodes and tips are replacement parts that made by WeldingStop, and not original.
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

Lotos FP05-S 5 Pin Foot Pedal for Plasma Cutter Welder Amp Control for Plasma Cutter and Welder Combos CT520D LTPDC2000D, Silver

  • Foot pedal for Lotos plasma cutter and welder combos CT520D LTPDC2000D.
Check Stock