Reviews Plastic Nipple Fittings For Plumbing

Five Oceans FO1867 White Straight Thru-Hull Fitting Connection for Hose, 1-1/2 inches, Injection Molded Polypropylene, Barbed, Resist Harsh Conditions

  • This Five Oceans Thru-Hull Fitting Connection for Hose is ideal for scupper, sink drain, and bilge pump overboard discharge. Hose Diameter: 1-1/2 inches (38mm).
  • It is made of tough injection molded Polypropylene plastic that will resist sunlight, salt water, oil, gasoline and most common marine chemicals.
  • Nylon plumbing fittings like this cost less than similar fittings made of Marelon or Bronze..
  • Excellent resistance to UV and weather-aging.
  • Thru-Hull Connections For Use With Hose Are Not Recommended For Use Below The Waterline. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

1-1/2" 5-way Cross PVC Fitting Connector

  • The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
  • All five outlets are non-threaded sockets.
  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
Check Stock

SharkBite 3/8 Inch to 1 Inch Pro Push to Connect Disconnect Tool, PEX Pipe, Copper, CPVC, PE-RT, HDPE, PROD3810

  • SHARKBITE PRO PUSH-TO-CONNECT DISCONNECT TOOL: This SharkBite pro disconnect tool allows for brass plumbing fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push-to-connect fittings in tight spaces for easy disassembly.
  • EASY TO USE: This handy disconnect tool can remove any type of fitting from 3/8 inch to 1 inch.
  • does not require any installation or interchangeable faceplates to allow for comfortable and convenient use.
  • DURABLE AND HIGH QUALITY: Pex ring removal tool features comfortable rubber grips and is constructed with heavy-duty handle springs for optimal durability.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ...mperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool t....
Check Stock

WMYCONGCONG 80 PCS Hydraulic Zerk Grease Fitting Assortment Kit SAE Standard including Straight, 90 Degree, 45 Degree Angled Grease Fitting for Replacing Missing or Broken Zerk Fitting

  • High Quality: The grease zerks fitting are made of zinc-plated iron, galvanized iron with high strength is more durable and rust-resistance..
  • Time-Saving: The grease zerk nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, will not slippery when rotating, easy and convenient to handle..
  • Wide Application: These straight and angled grease fittings are great to replace your old or broken fittings in the hydraulic grease line, suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • Good Storage Organization: Different size of grease fitting is packaged into different grids with size label for easy identification. Durable plastic case, convenient to storage. Handy assortment in organized case, easy to carry..
  • 80 pieces SAE Grease Fittings Assortment Kit: Sizes include: Straight 1/8"-27(10pcs).
  • all common-used sizes, good value, come in handy..
Check Stock

Brass Bushing 1 Male x 3/4 Female Threaded Brass Reducer Bushing Lead-Free Pipe Fittings 1inch x 0.75 inch

  • ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
  • DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Brass Pipe Fitting Brass Bushing 1 Male x 3/4 Female Hex Bushing Reducer Threaded Brass Reducer Bushing Pipe Fittings 1inch x 0.75 inch

  • ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
  • DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..
Check Stock