Reviews Metric Nipple Fittings For Plumbing

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

A necessary tool for building, repairing, or truing wheels.
Small and lightweight, measuring 40mm (1.57in) in diameter and 11mm (.43in) height.
Fits nipple sizes (metric): 3.23mm, 3.30mm, 3.45mm, 3.96mm, 4.40mm, 5.00mm.
Nipple sizes (SAE): .127 inches, .130 inches, .136 inches, .156 inches, .173 inches, .197 inches.

The 5 way PVC pipe fittings are commonly used to make center supports when covering a large area with a PVC structure. It is also useful to make bases for sprinklers, dog agility equipment and other stands..
All five outlets are non-threaded sockets.
Furniture Grade means this fitting has a non-marked, glossy finish..
DO NOT use these fittings for plumbing projects..
1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..

SHARKBITE PRO PUSH-TO-CONNECT DISCONNECT TOOL: This SharkBite pro disconnect tool allows for brass plumbing fittings to be disconnected from the pipe quickly and easily.
can remove or adjust push-to-connect fittings in tight spaces for easy disassembly.
EASY TO USE: This handy disconnect tool can remove any type of fitting from 3/8 inch to 1 inch.
does not require any installation or interchangeable faceplates to allow for comfortable and convenient use.
DURABLE AND HIGH QUALITY: Pex ring removal tool features comfortable rubber grips and is constructed with heavy-duty handle springs for optimal durability.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
suitable for commercial repairs or home improvement projects.
MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.

...mperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool t....

Rated to 10,000 PSI! Locks on, stays on. Does not leak once locked on..
Hands free - does not pop off under pressure. Easily release from fittings with the thumb lever, even at extreme pressure..
Fits all standard Grease Guns - 1/8 NPT fitting. Fits all SAE and Metric Zerk fittings. Simply replace your existing coupler..
Over 3.5" of reach. Great for shielded PTO shafts, axles, harvester heads, U Joints and other recessed grease fittings..
Includes rebuild kit. Easily replace seal and jaws without replacing the coupler..

PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
MADE IN THE USA: Manufactured and tested in the USA.

Bike Spoke Wrench is a must-have tool for bike rim correction..
2pcs 8 cut open design, suitable for spoke nipple sizes range for 10/11/12/13/14G/15G.
1 pcs Red Bike Spoke Wrench, can 360 degree adjust,1 pcs Black Bicycle Wheel Spoke,14G-15G, fit for tightening the spokes and correcting the deformation of the rim..
The single size spokes Wrench suitable for 14G spokes.This spoke wrench is small and lightweight, measuring 40mm (1.57in) in diameter and 13mm (0.47in) in height..
Fits nipple sizes (metric): 3.23mm, 3.30mm, 3.45mm, 3.96mm, 4.40mm, 5.00mm..
Nipple sizes (SAE): .127 inches, .130 inches, .136 inches, .156 inches, .173 inches, .197 inches..