Reviews Pipe For Pipe Clamp

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ..., low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applications. Providing a strong and reliable crimp fitting application..
  • ✔【EASY INSTALLATION】Pex clamp rings slide the 3/4 in. clamp ring over the pipe, push the pipe onto the fitting and squeeze with your clamp tool to make a secure connection..
Check Stock

Wdwlbsm Double Antenna Mast Clamp V Jaw Block with U Bolts|Heavy Duty Anti-Rust Mast to Mast Mount Bracket Kit for TV,CB,Ham,Pipe,Flag Pole,Hold Umbrella Parasols for Deck Railing,Fence(2 Set)

  • 【WE MAKE DIFFERENT】Compare with other styles, We provide two claw hand screw nuts to make it easier and faster for you to install..
  • 【DOUBLE PIPE-MOUNTING】The antenna pipe clamp kit is great for mounting round pipe(pole) to another round pipe(pole),the diameter range of round pipe is 1 - 1.8"..
  • 【JAW BLOCKS MAKE IT MORE STABLE】Antenna mast clamp kit uses jaw blocks with U bolts(2 " in distance, 5.5 " in length) to give a stronger install for ensuring the pole not slip down..
  • 【WIDELY USED】This mast mounting clamp is designed to support most WiFi, PCS, Cellular, TV antennas, Ham, flag post, torches, fishing rods, patio umbrella, parasols. It allows you to vary the mounting pipe length..
  • 【MATERIAL】Heavy duty mast to mast mounting hardware is made from Zinc-Plated Steel with anti-rust coating finish..
Check Stock

DCT Multi-Angle Adjustable 13ft Band Wood Corner Clamp – Woodworking Clamping Kit that Clamps Picture Frames & More

  • WHAT WILL YOU GET - You will get 50 pcs metal u bracket. The M12 pipe strap clamp is suitable for pipes with a diameter of 12mm/0.47inch. The diameter of the mounting hole is 4mm/0.15inch, the width is 11.7mm/0.46inch, and the thickness is 0.5mm/0.02inch..
  • HIGH QUALITY CLAMP - Tube strap tension clip is made of high-quality 304 stainless steel material, high hardness, corrosion resistance, water resistance, oil resistance. The surface is treated with rust prevention, and it can be used in a humid environment without worrying about rust. The metal pipe clamp adopts superb production technology, the surface is smooth and burr-free..
  • MULTIPLE USE - The u-tube clamp is widely used in stainless steel pipes, rubber hoses, gas pipes, plastic steel pipes, drainage pipes, etc. The rigid pipe strap is suitable for fixing pipe line with oil, water and gas..
  • SLOTTED DESIGN - The slotted design is more sturdy and not easily deformed. The U-shaped slotted design is suitable for fixing pipes on various surfaces and supporting structures. The metal pipe strap can be fixed on the wall and ceiling with screws or expansion screws, and the installation is simple fast..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange ser....
Check Stock

SYMOTTEC 1/18'' to 3-1/2'' Exhaust Tail Pipe Expander Muffler Spreader Tool Set Compatible with Most Vehicles and Trucks

  • This Exhaust Pipe Expander Muffler Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches..
  • This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks..
  • Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
  • Kit Includes 1 x small expander: 1-1/8" to 1-3/4", 1 x medium expander: 1-1/2" to 2-1/2", 1 x large Expander: 2-1/8" to 3-1/2, 6 x extra O-rings..
  • IMPORTANT NOTICE!!! (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
  • (2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

3 pcs 1/18" to 3-1/2" Exhaust Pipe Expander/Pipe Stretcher Kit/Muffler Pipe Expander/Tail Pipe Expander

  • ◇ Important : The previous product quality was not very good, we have asked the factory to improve the product quality, now the product quality is better than the previous one, please don't worry. If there is any quality problem, please contact us in time.
  • ◇ Features : This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes.
  • ◇ Funtion : The 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches.
  • ◇ Easy to use : Designed to quickly and easily straighten out clamp dents in mufflers .A simple wrench turn expands pipe for exhaust system repair and installation.
  • ◇ Contents: 1 X Small Expander: 1-1/8" to 1-3/4" 1 X Medium Expander: 1-1/2" to 2-1/2" 1 X Large Expander: 2-1/8" to 3-1/2" 6 X Extra O-Rings 1 X Blow Mold Storage Case.
Check Stock

SCITOO 3-Pieces Pipe Expander Tool Set 1/18'' to 3-1/2'', Tail Pipe Expander Compatible with Most Vehicles and Trucks

  • 【FUNCTION】 The SCITOO 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches..
  • 【CORRECT USE TO AVOID DAMAGE】 Only work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes. Please pay attention when using: (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
  • (2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.
  • (3) Avoid twisting the expander with excessive force..
  • 【FEATURES】 This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes. A simple wrench turn expands pipe for system repair and installation..
  • 【SUPERIOR MATERIAL】 1pc small expander: 1-1/8" to 1-3/4", 1pc medium expander: 1-1/2" to 2-1/2", 1pc large Expander: 2-1/8" to 3-1/2, 6pcs extra O-rings. Drop forged and heat treated steel construction for strength and durability and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can bu....
Check Stock

White Clamps Farm Plastic Clamps Greenhouse Film Clamps Grip White Clamp PVC Pipe Plastic Clamps for Greenhouse Plant Supplies (40 Pieces,3/4 Inch)

  • Fits 3/4 inch PVC pipe: each white clamp measures approx. 8 cm/ 3.14 inches in length, 1.9 cm/ 0.75 inch in diameter, it works on 3/4 inch PVC pipe, and it will work for pipes with a little larger or smaller diameter too, please confirm the pipe diameter before purchasing.
  • Reliable to use: these farm plastic clamps are made of PVC plastic, the material has strong plastic structure and temperature resistant, so they are durable and sturdy to use, featuring with strong fixed function and not easy to break, so you can use them for long time.
  • Practical application: this PVC pipe plastic clamp is suitable for greenhouse film, net to pipe, quilting frames and more, it is also an ideal choice for building greenhouse, floor covering or other places if needed, so practical in our daily life.
  • Convenient to use: you can use these plastic clamps to the pipe, they hold the plastic on the pipe tightly, without damaging or breaking, and you can use these plastic clamps to build your greenhouse easily.
  • What you get: you will receive 40 pieces white clamps in the package, with white colors and proper size, sufficient quantity is enough for your daily use and replacement, and you can share them with your friends or neighbors.
Check Stock