Reviews Panel Meter Series

Brush Strip Cable Management Panel, Black, Cold Rolled Steel, Powder Coated Finish

EASY INSTALLATION: Simply unscrew and remove the existing cable plate on the top or bottom panel and install the brush panel with the included hardware.
DURABLE: The brush panel frame is made of heavy-duty cold rolled steel with stiff nylon bristles and a classic black powder coated finish.
ADVANTAGES: The brush panel stops unwanted airflow, keeps dust and dirt out, and improves cooling efficiency within the cabinet.
COMPATIBLE: The brush strip cable management panel is compatible with the NavePoint Swing Gate Series Cabinets, Performance Series Cabinets, and Mid-Depth Series Cabinets.

Clear and Easy to Read: This water flows meter uses ABS plastic transparent panel, which is easy to read and clear at a glance.
High Precision Measurement: Liquid measuring tools have high measurement precision, with an accuracy of less than 4%, which is more accurate and reliable. You can buy with confidence.
Made of ABS Plastic Material: Our flowmeter floats are made of durable ABS plastic shell, which has a certain tolerance.
Wide Application Range: This universal tube flows meter is suitable for measuring various liquids. You can use it with confidence.
Tube Flows Meter: Our tube liquid flows meter has a plastic plane interface, which makes readings more convenient and intuitive.

Baseboarders Elliptus Series Panel only includes the replacement heater panel cover. Baseboarders Elliptus Series Endcaps (Closed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electri....

Compact and lightweight: The TTartisan meter is a small, lightweight accessory meter that weighs only 35g, it serves well for people who use older Leicas and similar rangefinder cameras..
Shoe-mount design: The meter conveniently slips into the camera's shoe while readings are taken..
Two dials: one for ISO and aperture and another one for shutter speed allow settings to be made..
LED indicator: A series of LEDs illuminate to tell the user when the correct measurement has been achieved.The TTartisan meter is available in silver or black colours..
Mechanical range Limit:Limited by the mechanical range of the dial ligth meter When ISO is 25, the aperture setting with F-number greater than 8.0 is not possible When ISO is 50, the aperture setting with F-number greater than 11 is not possible When ISO is 100, the aperture setting with F-number greater than 16 is not possible.

This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp)..
This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key..
Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz..
The "Sorting"mode could help the user to make a quick sort for a bunch of components..
Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included..

YHTAUTO Air mass meter boot are precisely manufactured with high quality material, it is a rubber or plastic shell that covers the air mass meter.
Replacement for Select BMW E36 E39 E46 Series 2.5L 2.8L Models, input your make, model, year and trim level into the amazon garage tool to verify if it fits your car.
Reference Number: 696-059, 1354143562, exceeds or meets OE performance, protecting air mass meter from damage from particulates or small pieces of debris in the engine compartment.
If the air mass meter boot cracks or breaks, it should be replaced as the readings from the sensor might be thrown off by the damage.
Please double check your vehicle fits our Compatibility Chart before buying. Do not hesitate to contact us if you have any doubts or queries.

PROFESSIONAL-GRADE OBD2 PROGRAMMING TOOL: Top-quality 1.4 meter long interface cable with FTDI 232RL / 232RLRQ chip for full diagnostic and coding..
FLIP SWITCH FOR K-LINE AND DCAN: 2-in-1 interface functionality. Switch between (left flip) older models (1998-2007) using K-Line and (right flip) the newer models (2007-2018) using the DCAN interface..
E-SERIES MODELS FROM 1998-2016: Supports 1 Series, 3 Series, 5 Series, 6 Series, 7 Series, X Series, Z series, and other E chassis models between 1998-2018..
WINDOWS ONLY: Runs on Windows XP/7/8/10. Made for INPA, EDIABAS, NCSexpert, NCS Dummy, Rheingold, SSS Progman, Tool32, WinKFP, and many other available softwares..
CD ISSUE: Kindly message us for the complementary software. We're thanking you for the initial feedback regarding this. The obd2 works perfectly, though, and isn't affected...