Reviews Voltage Panel Meter

ELING Warranted MPH GPS Speedometer Odometer 160MPH for Car Motorcycle Tractor Truck with Backlight 85mm 12V/24V

Cut an 85mm (3 3/8″) hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
9-32VDC(12VDC/24VDC) Working Voltage, Red Backlight, 1 year Warranty.

Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge..
For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable..
It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it..
It shows current speed and odometer(cannot be reset), no trip meter. If you also need trip meter, pls. search for ASIN B07KPHDFDB, B07KPHC1ML or B07KPG7XT3.
Red Backlight, 12VDC/24VDC Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection.

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
The 117 multimeter features true RMS for accurate measurements on non-linear loads.
The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.

Generate up to 4500 starting watts and 3600 running watts.
4-gallon fuel tank provides a half-load runtime of up to 13 hours.
Digital data meter displays voltage, frequency, session runtime, and total runtime.
Packed panel includes four standard 120V 20A household duplex outlets (5-20R), one 120V 30A RV outlet (TT-30R), and one 120V three-prong transfer-switch-ready 30A outlet (L5-30R).
Features an EPAIII and CARB compliant 212cc 4-stroke engine, an automatic voltage regulator, a spark arrestor, low-oil shutdown, and a two-year warranty.

The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
The 117 multimeter features true RMS for accurate measurements on non-linear loads.
The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.

Measure range: -50~+99oC. Mounting size: 71*29mm. Auto switch between refrigerating and heating.
Auto switch between refrigerating and heating. Return different value.
Front panel size75(L)x34.5(W)mm. Mounting size:71(L)x29(W)mm.
Product size: 75(L)x34.5(W)x85(D)mm. Sensor length 2 Meter(include the probe).Input voltage:110-120V.
Please Note: the STC-1000 thermostat output terminal has no output voltage, so the device must be connected to a power source..

【High Quality】The pointer type voltmeter is made of high quality meterial, comes with simple structure, convenient installation, clear scale, beautiful appearance, etc.
【Easy to Use】The pointer dc voltmeter can simple and convenient to wire, embedded installation, beautiful and generous with quality assurance.
【Show Clearly】The screen‑printed scale is clearly visible on the dial, black characters on a white background with red pointers, the color contrast is bright and clear at a glance.
【Feature】This panel volt voltage meter is compact design, easy to carry and store, mainly used to directly measure the voltage in electrical circuits.
【Wide Use】The voltage measuring instrument is suitable for some power equipment and electrical equipment in the power transmission and distribution system.

【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
NCV Detects Existence of AC voltage on....
【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....

400A MAX AC/DC CURRENT RANGE: Reads both AC and DC current. With 9 functions it’s the perfect meter for the professional electrician.
MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live voltage may be present before working on electrical installations or troubleshooting.
CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.