Reviews Open source Wood Filament

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

  • ①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
  • ②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
  • ③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
  • ④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
  • ⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....
Check Stock

Amazon Basics PETG 3D Printer Filament, 2.85mm, White, 1 kg Spool

  • 3D printer filament (2.85mm diameter, white.
  • designed to fit most common 3D printers (check spool size for compatibility).
  • Made of PETG plastic, known for its ease of use (like PLA) and durable strength (like ABS).
  • offers easy bed adhesion, stiffness, and a glossy-type finish.
  • resealable storage bag included to protect filament between use.
  • keep filament dry and away from UV light.
  • Backed by an AmazonBasics 1-year limited warranty.
  • Please make sure your printer supports 2.85mm filament before buying this filament. This filament is supported on all 2.85mm open standard 3D printers. Verify your printer before purchasing to avoid unnecessary returns..
Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

  • 【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
  • 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • 【PLA+ Filament Bundle Multicolor】PLA Plus 3D printer filament bundle multicolor, 10 colors in total: Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent. 10 rolls of multicolor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of ....
Check Stock

Monoprice Select Mini 3D Printer v2 - White With Heated 120 x 120 x 120 mm Build Plate Fully Assembled + Free Sample PLA Filament MicroSD Card

  • Support for All Filament Types: The heated build plate and wide range of extruder temperatures allow this printer to work with any type of filament,....
  • Compact Desktop Design: Featuring a small footprint and basic, open frame design, this 3D printer is compact enough for any desk..
  • Ready to Print: Unlike most other low-cost 3D printers, this printer ships fully assembled and has already been calibrated at the factory. We even....
  • Sample Filament diameter- 1.75mm, Filament size spool/sample- about 10ft. One sample print, Filament Color- natural/clear.
  • Heated aluminum build plate nozzle cooling fan for printing all filament types. Complete kit with sample PLA filament, bed scraper, and MicroSD card....
Check Stock

PRILINE 1kg Wood PLA Filament 1.75 3D Printer Filament( The Layer Should be Thicker Than 0.2mm and The Nozzle Should be Bigger Than 0.4mm)

  • Priline wood filament has wood powder in it.
  • Size: 1.75mm (Tolerance Level : ± 0.03mm) - Spool Diameter: 7.87" - Spool Width: 2.83" - Spool Hub Hole Diameter: 2.20".
  • Recommended Printing Temp/Nozzle Temperature: 200-230°C (392-446°F), Base Plate Temperature: 0-50°C(32-122°F).
  • No more durable nozzle need.But wood filament requires a .6 or larger nozzle to avoid clogging.
  • Refund Guarantee in 30 Days: We trust our products. If you aren't happy with our 3D printer filament, tell us and We will arrange a refund for you.
Check Stock

ZONESTAR Z9V5Pro Multi Colors 3D Printer with Four Extruders 4.3 Inch TFT-LCD 32-bit Silent Motherboard Auto Leveling Auto Resume Removable Magnetic Platform Large Build Volume 300 x 300 x 400mm

  • ...u have only a single color 3d model file.
  • 2. [Fast Assembly and Quiet Printing] The printer boasts a modular design that makes it easier to assemble. 32-bit motherboard with silent motor drivers make the machine work noise very low (the noise measured at 1m away from the machine is less than 55dB).
  • 3. [More Function] Filament detection and print resurrection function provide can continue to print from the same place where it has been stopped, regardless of unexpected power failure or the filament have run out. Bed auto-leveling sensor on which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling. The models can be eay to remove by bending the flexible magnetic platform gently after printing.
  • 4. [Open Source and Upgradable] Z9V5Pro’s firmware and slicing software are open source. You can change it to make the machine realize the functions you expect. We have introduced many optional upgrade components, including laser engraving module, auto repeat printing module (to realize small-scale production), WiFi wireless control module, direct drive extruder (to print flexible filaments), color mixing hot end, etc., you can choose to upgrade them if need.
  • 5. [Trustworthy & No Worries] Our products have s....
Check Stock

TIANSE PLA 3D Printer Filament， Wood pla，1.75mm pla Filament, 1KG Spool Filament for 3D Printing, Dimensional Accuracy +/- 0.03 mm

  • Material: Wood-Pla Composite - Color: Wood （25%-30% wood fill).
  • Weight: 1 KG (approximately 2. 20 lbs) Spool.
  • 1. 75mm Filament Diameter (Dimensional Accuracy +/- 0. 03mm).
  • Wood 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 100% Satisfaction : 2-Year and 24*7 customer support with technical advice.
Check Stock

AMOLEN 3D Printer Filament Bundle,Wood PLA Filament 1.75mm Bundle,Wood Filament,Marble PLA,Sparkles Gold,Bronze,3D Printing Filament Bundle,225g X 4 Spools

  • ✔PLA FILAMENT BUNDLE - 225g Wood Filament,contacts 20% real Bamboo fiber,225g Marble PLA,225g Sparkles Gold,225g Bronze PLA Filament..
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
  • ✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
  • ✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？.
Check Stock