Reviews Off road Truck Bumpers With Winch

Tioyar Front Bumper w/Winch Plate + 5 LED Lights Fit 1984-2001 Cherokee XJ and Comanche MJ

  • Fit 84-01 Cherokee XJ /1984-2001 Comanche MJ.
  • Bumper uses 5/32" thick low carbon hard steel and 2" x 0.120" precision tolerance steel tubes to make the bumper harder and more durable. The grade 3 textured black powder coating is corrosion resistant and durable..
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The front bumper contains a built-in winch plate that can support a 12,000-pound winch. inside and outside of the D-ring mount are mechanically welded to achieve maximum strength..
  • Both the inside and outside of the D-ring mount are mechanically welded to achieve maximum strength. Even on a dark road, the built-in LED light can provide a clearer view. It is also safer when off-road. The front bumper is equipped with 1x144W LED aluminum light + 2x20W LED aluminum lights + 2x18W LED aluminum lights..
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

TYT 1/4 inch x 50 ft Synthetic Winch Rope, 6MM x 15M Winch Line Cable Rope with 1.5M Protecting Sleeve and Stainless Thimble, 8500 lb UHMWPE Made Nylon Rope, for UTV ATV Winches Synthetic Rope (Grey)

  • ...ope fails, but not hurt you.Therefore, more Safer than steel cable which becomes a whip that is capable of doing serious damage to a person or your precious off road vehicle..
  • 【Cost Performance】More affordable and much safer than traditional steel cable, it is great works for off road vehicle SUV ATV UTV winches truck boat Car, etc, including Smittybilt, Warn, ARB, AC-DK, OPENROAD, TYT, Power winch, etc..
Check Stock

Heavy Duty 4 Ton 8800 lb. Capacity Universal Black Snatch Block Recover Winch Pulley ATV UTV by Alfa Wheels (1)

  • DOUBLE YOUR PULLING POWER: Redirect or Increase 2x in Winch Pulling Power. Keep it as Part of your Off Road Kit in your ATV, UTV, Truck. Ideal for Towing, Don’t go four Wheeling without it.
  • NO DISASSEMBLY REQUIRED:  The Pulley Swivels Open to Accept Line. For Use with  up to 5/16" Winch Wire Rope. Fast Attachment. 3" Holes. Measures 10-1/4" x 5".
  • PREMIUM GRADE QUALITY: 3/16" Thick High Tensile Strength Steel with powder paint Finish, Heavy Duty, Dowel Bearing.
  • EXTRA BENEFITS: Reduces Winch Load and Heat, Increases and Preserves Winch Motor Life, Helps Increase Pulling Power Using a Double Line Pull Technique. It is used for indirect pulls using the block as an anchor point, too.
  • WORRY - FREE WARRANTY: We take customer Satisfaction very Seriously. That's why all our products are backed up with a 1 Year Money Back Guarantee.
Check Stock

STEGODON Heavy-Duty Recovery Kit|Unique 4x4 Winch Accessory Kit with Recovery Tow Strap+8-Ton Snatch Block+Shackle Hitch Receiver+Hitch Lock+D-Ring Shackles+Folding Shovel+Tire Deflator+Winch Dampener

  • New Accessory Kit:We've been designing and selling Winch, and we've heard a lot of suggestions about Winch Accessory Kit from our customers,now here it is,the STEGODON Winch Accessory Kit was specially designed to help you recover and tow your trailer,Jeep,4x4, Truck, or SUV.it can get you out of nearly any bind including mud, sand, and snow..
  • Security:We consider that safety is especially important when off-road.One of the most dangerous aspects of winch operation is the recovery of cables,because the cable stores kinetic energy.If the wire or joint breaks under the pressure, it can become a deadly projectile, which can do us harm.Our Winch Dampener is designed to improve security when using Winch.If a break occurs, be sure to use a winch line damper to absorb most of the kinetic energy..
  • Versatility :It can help you increase the load capacity of Winch, change the direction of the pull and reduce the Winch pull.Or you need to navigate around trees or other obstacles by changing the direction of your off-road recovery. Both can be easily accomplished by using our Heavy Duty Snatch Block.Tire Deflator gauge can help you maintain your tires at the right pressure depending on the trail demands..
  • Heavy duty test:When it comes to safe recovery of your vehicl....
Check Stock

VEVOR Truck Winch 13000lbs, Electric Winch Synthetic Rope with Wireless Remote Control and Powerful Motor for UTV, ATV, Jeep Truck and Wrangler in Car Lift

  • ✔️ 【Fits】Most bumpers or winch mounts with a 3.0" x 6.6" (76 x 168mm) mounting bolt pattern. Note: Requires machine-specific mounting plate or winch ready bumper (sold separately) | Instructions can be accessed through QR code on through Manufacturer's website..
  • 【6000 LB Winch】 If you get your UTV or ATV in rough situations, you need a 6000 Lb. Black Ops Winch to handle it. | Permanent Magnet 12V 1.9 Hp Dc Motor | 6000 Lb. rated line pull synthetic 50' rope | 266:1 Gear Ratio | Winch Dimensions (Lxwxh) = 14.56” X 4.41” X 4.86”.
  • 【Kit Includes】6000 lb. Black Ops Winch, 50' synthetic rope, wired dash rocker switch, fairlead support bracket, winch hook kit, automatic brakes, hook pull strap, rope stopper, aluminum hawse fairlead- 6.0" ( 152.4 mm), heavy-gauge extended wiring and water proof solenoid (long enough for four-seaters), and all hardware for ease of installation! | Automatic shut off.
Check Stock

ZESUPER Universal 10\ Aluminium Winch Hawse Fairlead for 8000-13000LBS Winch

  • Package includes: 1X Winch Shackle + 1X Hawse Fairlead + 1X Flip-Up 254mm Hawse Fairlead Mounted License Plate Holder + 2X License Plate Mounting Screws.
  • Fitment: (for models with Hawse Fairlead only): For steel cables and synthetic ropes with 3/8" or 1/2" Diameter/ Fits shackle / soft shackle / D-ring with up to 7/8" pin such as: 7/16" 1/2" 3/4" 7/8" Shackles/ D-Rings 003c/br003e Idea for Towing Strap, Tree Strap, Tow Hook.../ Universal fits most car off-road truck.. with 10" bolt mount and 254mm Hawse Fairlead Mounted.
  • Hawse Fairlead 10" Standard Bolt Mount Pattern. Constructed from Strong Aluminum. Not Fray or Tangle Synthetic Rope.
  • Flip-Up Mounted License Plate Holder Made from 2mm High Tensile Strength Steel. Durable Powder Coat Finish.
  • Winch Shackle new black design brings a new look to your vehicle. There are four rubber guards that protect the alloy fairleads and are firmly connected to the winch shackle.
Check Stock

Rugged Ridge 15104.29 Premium Recovery Kit, Mesh Bag

  • Jeep Recovery: A complete recovery kit to complement your winch for safe and effective vehicle recovery.
  • a durable lightweight mesh recovery gear bag keeps you organized and prepared when hitting the trails.
  • Premium Recovery Kit: Includes a 30 foot kinetic recovery rope with a 7500 load limit.
  • a 20,000 pound snatch block pulley, a 3 inch tree strap, a pair of 7/16 inch soft rope shackles, a high visibility winch line dampener and leather work gloves.
  • Offroad Accessories: Get serious about the drive with a variety of off road Jeep accessories from entry guards and floor liners to entry guards, snorkel kits and antennas for a customized vehicle with top grade gear.
  • Rugged Ridge Jeep Parts: Count on Rugged Ridge to provide you with proven Jeep parts and accessories like bumpers, lift kits, wheels, interior accessories, floor liners and more for varying Jeep models.
  • Five Year Warranty: Our Rugged Ridge products are covered by industry leading 5 year warranty and Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.
Check Stock

Hunter GF-818 Grille Guard Bumper Push Bars Compatible for 2015-2020 Ford F-150 (2X2, 4X4, 4WD) – Powder Coated Black

  • RockTrix Front Bumper Brush Guard, Winch Guard. Made of high strength steel. Grille guard protects the grill and winch against damage from road and offroad debris. Electrophoretically coated in Satin Black for superior protection against corrosion..
  • Compatible with 2018+ Jeep Wrangler JL with factory Mopar Steel Bumper. Compatible with 2019+ Jeep Gladiator JT with factory Mopar Steel Bumper. Compatible with 82215351..
  • Fast and easy installation. Uses existing factory bolts. No drilling needed. Installation time less than 15 minutes..
  • Note: Not compatible with JL Wranglers/Gladiators with plastic bumper, or aftermarket steel bumpers. This product is only compatible with factory mopar steel bumpers.
  • Includes 1 Year Warranty replacement against corrosion damage or other manufacturer defects..
Check Stock

LEGO Technic Rough Terrain Crane 42082 Building Kit (4,057 Pieces)

  • This LEGO construction vehicle building set features a mobile toy crane with workable legs, boom and winch, on top of a 6-wheeled toy truck.
  • After driving the truck toy into position, kids can lower the crane's support legs, rotate and extend the boom and raise and lower the winch.
  • Includes driver and crane-operator LEGO minifigures, and toy accessories - a wrench, walkie-talkie and 2 safety helmets for realistic play.
  • The included LEGO City Road Plate can be winched into position by the crane toy, and can be easily connected to other LEGO City building toys.
  • Building a LEGO city has never been so much fun.
  • when play is done, kids can secure the toy winch hook and head out to the next job.
Check Stock