Reviews Non ferrous Alloys

THINBIT 3 Pack LGPT045D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use any straight or 90 degree toolholder..

THINBIT 3 Pack LGPT085D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .043" of collet face or shoulder of larger diameter..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use any straight or 90 degree toolholder..

THINBIT 3 Pack LGOR095D5CR010 'L' Series, Uncoated Carbide, Static O-Ring Grooving Insert for Non-Ferrous alloys, Aluminium, Plastic Without Interrupted cuts.

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Uncoated DURA-MAX 5000 carbide Static O-Ring grooving insert for non-ferrous alloys, aluminium, plastic without interrupted cuts..
• .095" tip width with .010" corner radii. 7 degree included angle. .250" depth of cut. Internal grooving with 1.250" minimum bore..

DEWALT 10-Inch Miter / Table Saw Blade, Fine Crosscutting, 80-Tooth (DW3219PT)

Duracoat DuraBake - Shake N Bake Finishing Kit #4 - Matte Black

• Kit includes 6 oz aerosol DuraBake and 6 oz aerosol TruStrip Cleaner/Degreaser.
• DuraBake enamel is extremely durable, oven cured, and can be applied in as little as 15 minutes.
• DuraBake may be used on ferrous metals, stainless steel, aluminum, alloys and plastic.
• Available in several great DuraCoat colors.

90pcs 2 Inches Sanding Discs,Surface Conditioning Disc,Quick Change Sanding Disc with a 1/4 Inch Holder,Fine Medium Coarse Aluminium Oxide Nylon Pads

• Package List:90pcs Fine Medium Coarse sanding discs comes with 1/4" shank disc pad holder, suitable for most die grinder, satisfying almost all your general polishing requirements.
• High Quality:Superior in performance with good durability, plasticity and flexibility, high abrasion resistance and fast grinding force.
• Wide Application:For cleaning and finishing on all metals, for removal of light rust, oxides and coatings.Wide application to stainless steel, standard or alloyed steel, non-ferrous materials and alloys, plastic and fiberglass, for cleaning, finishing, blending and deburring applications.

THINBIT 3 Pack LGPT045D57L 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

• See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
• Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
• Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
• Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
• Use with Large series toolholders. Use any straight or 90 degree toolholder..

uxcell 1.75mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

• Specification: Diameter: 1.75mm / 0.07″.
• Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
• Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
• For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
• Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
• Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.

uxcell 3.25mm Solid Carbide Drill Bits Straight Shank for Stainless Steel Alloy Hard Steel, Hardened to 50 HRC, 2 Pcs

• Specification: Diameter: 3.25mm / 0.13″.
• Made of Solid Carbide (Tungsten Steel), Hardened to 50 HRC.
• Applications: Widely Used on cast iron, non-ferrous alloys, high silicon aluminum, copper, plastics, hard rubber etc..
• For Abrasive Materials: Designed for drilling abrasive materials when drilling accuracy must be maintained. Can be used in high temperature drilling applications.
• Solid Carbide Tool: Offering long tool life and faster cutting speeds than other substrates, but is more brittle.
• Please Note: Must be used with a rigid tool-holding systems. Fine grinding drill obtain accuracy and fine finish than other substrates.