Reviews Nocry Rotary Tools
TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools
- 100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
- 100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
- 2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
- 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check StockTEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools
- 100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
- 100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
- 2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
- 1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
- Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
- 3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
- US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..
Check StockFiskars Craft Supplies: Rotary Cutter, Comfort Loop Fabric cutter for Sewing and Quilting Projects, 45mm Blade (195210-1021)
- Quality Tools for Arts and Crafts: From scissors and cutting mats, to rotary and paper cutters, to quilting and scrapbooking supplies, Fiskars crafting tools are designed to help you do what you do best: express yourself..
- Precision for every project: High-grade, precision-ground premium steel 45 mm rotary blade stays sharper longer than other rotary blades. Pair with Fiskars self-healing cutting mat to protect your work surface and for easy and enjoyable creating..
- Durable and Comfortable: Ergonomic loop handle feels natural in your hand for comfort and control. Sliding button extends blade during use, locks it into position and retracts it for safe storage. Blades snap in or out easily for quick replacement..
- Versatile rotary cutters: Cut multiple layers of fabric, paper, felt, and vinyl in straight lines and curves when doing arts and crafts for adults or kids. Great addition to your sewing accessories and quilting supplies!.
- Includes 1 Fiskars Fiskars 45mm Contour Rotary Cutter. Rotary blade can be assembled to either side for both right- and left-handed users. Fiskars craft supplies & materials are built to last and backed by a full lifetime warranty..
Check StockKingTool 78 Pcs Ultimate Sewing Starter Kit, Ultimate Sewing Tool Kit for Fabric Sewing Projects
- Bundle with 11 most popular high quality sewing and crafting tools, Includes a A3 Cutting Mat, 45mm rotary cutter with 2 extra blades, a patchwork ruler, a 5 in 1 Sliding Gaguge, a Tailor Scissor, a tape measure, a storage case with 10 Safety Pins, 20 sewing clips, 40 Pearl Needles. Everything you need to start sewing in one compact Kit.
- A3 Scratch Resistant Cutting Mat With 2 Extra Blades: This A3-Size Rotary cutting mat is a multi-purpose mat that large enought to use them to protect the work surface from sharp blades, writing instruments, and other art and craft tools..
- Eergonomic Handle 45mm Rotary Cutter: Solid rotary fabric cutter has an ergonomic handle for comfortable cutting, perfect for cutting fabric, quilts, thread, paper..
- Multi-function 5 in 1 Sliding Gauge: Can be used for marking button holes.
- T gauge. Perfect for patchwork, quilting, scrapbooking.
- Tips: This sewing tool kids including A3 Rotary cutting mat, much bigger than A4 or A5 from the market. The rotary cutter have 2 extra blades. 5 in 1 sliding gauge is an indispensable right-hand tool for high quality sewing experience. 10 Inch titanium Orange Tailor scissor fit your hand, maximizing control and co....
Check StockNoCry Fast Draw Drill Holster - Balanced Fit for Cordless T-Drills, 17 Accessory Pockets and Open Loops for Tool and Bit Storage, Belt-Attachment
- ...s even large drills and is velcro-backed to stay out of the way while you’re working..
- HANGS ON YOUR FAVORITE BELT. This drill holder has an opening on the back to attach to your belt, padded belt, or tool belt up to 3 ⅛ inches wide.
- comfortable to wear even when carrying a heavy-duty impact driver or a cordless rotary tool. Designed to be worn on your right hip..
- SAVES YOUR BACK. No more bending down to pick up your drill.
- snug fit to keep your T-handle cordless power drill, hammer drill, impact wrench, or power screwdriver close at hand for when you need it.
- frees your hands so you can move with confidence and safety on ladders, roofs, and scaffolding..
- FOR PEOPLE WHO MAKE THINGS HAPPEN. 8 closed pockets hold screws, nails, drill extension rods and other small parts.
- 5 elastic pockets with closed bottoms for quick access to drill bits.
- 4 open loops for hanging pliers, screwdrivers, wire cutters, and more.
- 600D ballistic canvas construction double stitched for durability..
- NOCRY NO HASSLE GUARANTEE. If you’re not completely satisfied with your heavy duty drill holster, we'll make it right by replacing it or giving you a polite and quick refund - without needing to send yours back..
Check StockTACKLIFE ARTO2C 282-Piece Rotary Tool Accessories Kit 1/8-inch Diameter Shanks Universal Fitment for Easy Cutting, Grinding, Sanding, Sharpening, Carving and Polishing
- ▲282PCS ROTARY TOOL KIT ASSORTMENT – Includes rich rotary tool accessories of cutting, grinding, sanding, sharpening, polishing, engraving, drilling and cleaning, meet your various DIY application requirements.
- ▲SOLID STORAGE BOX – PS plastic box is more sturdy, falling resistant and moistureproof, easy for carrying and hanging.
- All parts were in order and set was complete, well organized to prevent scattered and confused.
- ▲ADDED ACCESSORIES – Equipped with Tacklife special chuck collet(1/16”, 3/32” and 1/8”)1.6mm, 2.3mm and 3.2mm and cloth wheel that dedicated to polishing of jewelry, glass, jade.
- Flap wheel for polishing and removing on heavy duty material.
- Diamond cutting disc for cutting jade, thin iron plate.
- ▲WIDE USAGE – 1/8″diameter shanks, compatible with most rotary tools.
- Ideal for for home improvement, hobby, craft and whenever you need to polish, grind, drill, cut, engrave, and more.
- ▲WHAT YOU GET – Tacklife ARTO1C 150-Piece Rotary Tool Accessories Kit(Suitable for Tacklife RTD35ACL Multi-functional Rotary Tool Kit and other most rotary type tools ).
Check StockGYROS 1.75” Mini Resin Cut-Off Wheels for Rotary Tools | 2 Double Fiberglass Reinforced Discs | For Wood, Plastic, Stone, Aluminum, Copper, Brass | Dremel Cutting Tool Accessory | Made in USA 11-21702
- ...e a maximum speed of 42,000 RPM..
- Double Reinforced, High Quality - Cutting discs are made of fiberglass abrasive with a double reinforced structure, they have a great working efficiency, unrivaled strength, and flexibility, are long-lasting and break-resistant. Professionals and hobbyists looking for the best rotary tool accessories for Dremel and other top-brand rotary tools will appreciate the Gyros Fiber Disk LT Multi-Set..
- Low Tensile Strenght – Gyros LT mini cutting discs are designed to cut a variety of materials, including Wood, Plastic, Stone, Ceramic, Aluminum, Copper, and Brass. Because the abrasive used is perfectly matched to the materials being cut, the cutting action is superior. Other formulations are HT – stands for High-Tensile Strength materials such as steel alloys, hard bronze, and metals. ST – stands for Super-Tensile Strength materials such as stainless steel and titanium..
- Works with Variety of Tools – These cutting disks are compatible with a wide range of Rotary Cutting Tools, including Dremel tools, electric drills, hanging grinders, and so on, making them the ideal rotary cutter. Use with Gyros Stainless Steel Mandrel SKU 80-18100 for optimal results. Works great with GYROS ProwerPro Rotary Tool SKU 40-00470. Fo....
Check Stock10PCS Drill Saw Attachment 30mm Rotary Mini Diamond Circular Saw Blades Cut Off Wheel Grey
- ✔ All Discs have Breathing Holes which is designed for heat reduction and removal of debris while using..
- ✔ The Cutting Wheels are sharp and strong, making them perfect for Cutting gemstones, glass, geramics, porcelain, tiles, carbide, rocks, aluminium and copper.
- ✔ Compatible with Dremel Rotary Tools .Turn your Dremel rotary tool into high-speed cut-off saw & grinding machine..
- ✔ Suitable for most rotary and air tools..
Check StockDremel 575 Right Angle Attachment for Rotary Tool- Angle Drill Attachment , Black
- Dremel 575D Right Angle Attachment for Dremel Rotary Tool quickly and easily converts your Dremel rotary tool to a right angle tool.
- This accessory will enhance the versatility of your Dremel tools allowing you to get into hard-to-reach areas.
- Quick connect system easily attaches to your rotary tool in place of the housing cap without the need of tools.
- Coupling system allows you to orient the right angle attachment on your tool in 12 different directions.
- Ball bearing and spiral bevel gears give long lasting durability along with smooth and cool operation.
Check Stock