Reviews Milling Machine Worktable Clamp

TE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

WEIXINHAI Camera Desk Mount Stand, 16.5-28.3 inch Aluminum Adjustable Tabletop Light Stand with 360° Rotatable Ball Head, 1/4“ Screw for DSLR Camera, Ring Light, Webcam, Projector

  • 【Adjustable Tabletop Stand】The desk mounting light stand can be adjusted Height of can be expanded from 16.5 inches to 28.3 inches (42 cm-72 cm).
  • Adjustable C-clamp can support the thickness of the worktable from 0.2 inches to 2.4 inches, The maximum weight that the stand can bear is 6 lb..
  • 【Non-slip Durable Material】Our clamp camera mount is made of sturdy and lightweight aluminum alloy, Preventing deformation, can be arbitrarily folded, Ring Light Mount easy to carry and storage, Ensure long-term use without rust..
  • 【C-clamp Camera Mount Stand】C clamp adopts EVA silicone anti-skid pad improve the stability of the base. Sponges on both sides to protect the table and furniture from scratches..
  • 【Applicable and Universal】With standard 1/4 screw, Rotating Camera Stand 360 ball head degree rotation. Perfect for makeup, Interviews, Smartphone holders and Dslr Desk Mount, live streaming, video chatting, Led video lights, light stands, etc..
  • 【About Desk Camera Mount Sets】1x adjustable desktop stand, 1x 360-degree metal ball head, 1x metal C-clamp, 1x instruction manual. promise friendly after-sales service, 24 hours customer service team.please rest assured to buy!.
Check Stock

Kitchen Appliance Sliders by LEMGU, 12 Pack DIY Self Adhesive Appliance Sliders for Most Coffee Makers, Blenders, Air Fryers, Pressure Cooker, Stand Mixers for Easy Sliding, Square

  • Convenient Kitchen Appliance Sliders: Easy to stick on the bottom of the appliance that can not only increases the height of the appliance and the worktable, allow it without touching water, but also can push, drag and even rotate the machine easily..
  • Provide Application a New Upgrade: Small appliance sliders are made of premium PTFE (Teflon) with a self-adhesive pad, gently push and pull can achieve unexpected results, allow the appliance move at will can give you better using experience..
  • Protect Appliance & Save Space: DIY kitchen appliance sliders can used for most heavy household appliances, make them easily slide on the worktable without leaving marks or making a harsh sound, offer appliance protection and save space of worktable..
  • Wide Applications: The sliders can be easily adhered to glass, wood, metal, plastic for most heavy household appliances, such as coffee makers, blenders, air fryers, pressure cooker, stand mixers and more. Also can be used on furniture such as stools, chairs, sofas and cabinets to facilitate movement without damaging the floor..
  • Simple & Practical Sliders: Durable material and self-adhesive design allow the sliders operate easier and than trays and mats to push the appliance without worry about damage the appliance or wo....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

Hand Crank Grain Mill, Long Handle Hand Cranking Manual Grinder Aluminum Alloy Milling Machine for Nuts Grain Corn Wheat Oats

  • ...h a mirror-polished surface, our hand grinder is durable, anti-rust, anti-corrosion, and no harm to your health. Besides, it requires a hassle-free assembly and can be directly washed with water. One brush is offered to help you clean it..
  • Adjustable Finesse: Helped by the spring, the adjusting screw can adjust your milling's coarseness and fineness. Use this food grinders manual grinder to make fresh and healthy milled grain products in minutes..
  • Hand Crank Grinder: The wooden hand crank has an ergonomic design for a comfortable grip and labor-saving purpose. It is easy to control and use. No power required, this grain grinder machine is energy-saving and kind to the environment..
  • Table-Clamp for Stability: With the table-clamp design, our manual poppy mill grinder can be easily adjustable to most tables and boards, which thickness is below 1.6''/4 cm. The clamp with an anti-slid rubber pad protects the surface and prevents the grinder from slipping in heavy work..
  • Wide Application: Our hand coffee grinder is widely used for grinding wheat, soybeans, pepper, white rice, brewed coffee beans, barley, etc. Perfect for home, coffee shop, and other places with needs. Coffee beans filling into the hopper don't exceed 50g, our coffee grinder is for grinding wh....
Check Stock

10PCS SEHT 43 AFSN Carbide Insert Face Mill SEHT1204 X83 H01 Lathe Milling CNC Tools Milling Cutter Suitable for Processing Aluminum Alloy.

  • Vertical & Horizontal: Our rotary table for milling machine is 6"/150mm with 4 slot can be used in both horizontal and vertical positions, meeting two functions and also bringing you convenient as well as efficient milling experience..
  • Remarkable Quality: Cast iron mainly used to cast parts subjected to pressure and vibration on mechanical equipment, offering rotary table for milling durability, shock absorption and heat-resistantance..
  • Excellent Precision: The precision rotary table indexing plate can be graduated 360 Degrees. Resetting dial and hand wheel can be graduated in seconds..
  • Convenient To Adjust: The dial is marked with an accurate scale. Just operate the control handle and adjust it to the desired position, which makes it possible to use it easily and conveniently..
  • Multiple Application: With a set of wrench and set of screws, the power milling machines are widely used in milling machine like index boring, milling, circle cutting, spot facing and boring hole and so on. Practical design can meet a variety of workshop work needs..
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock