Reviews Milling Boring Machine

TINVHY C1-ER32-100L Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder 25.4 mm shank Holder

  • 25.4 mm shank holding all ER32 collets (Clamping range up to 20mm).
  • Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
  • C1 ER32 Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
  • Widely used in boring, milling, drilling, tapping, grinding and other processing.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

10Pcs Nano Blue Coat End Mill CNC Router Bits,End Mill Rotary Burrs Engraving Machine Drilling Hole Tool for PCB Mould Plastic Fiber Carbon Fiber Hard Woo,1.5-3.175mm, 1/8\ Shank

  • ★Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm),10Pcs 1 set meet different needs.
  • ★High Efficiency: Carbide end mill engraving bits features of the good milling and cutting performance, Excellent cutting results to ensure high work efficiency.
  • ★Wide Application: Suitable for PCB, CNC, carbon fiber, hard wood, Mold, plastic fiber, printed circuit board, and other precision parts processing - carving, cutting, engraving, milling, boring, routing, slotting. processing to drill hole and polish smooth surface.
  • ★Hard Steel Material: This 10 PCS 1.5-3.175mm carbide cnc router bits set is made of good grain carbide material, ultra hardness & wear resistance, sufficient strength, not easy to break to ensure longer using.
  • ★Perfect Cutting: All the cnc bits have sharp cutting edge, milling, hole and plate edge with the surface clean, neat and no glitches.
  • Fast chip-removal speed leaves an unobstructed path for the end mill.
Check Stock

SHB12 Small Bore Boring Bar, High Speed Steel Lathe Extension Tool for CNC Turning Milling (SHB-12-03)

  • There are many optional types of SHB-12-03, SHB-12-04, SHB-12-05, HB-12-06 to meet various needs..
  • Vacuum nitriding treatment makes the surface harder and more wear-resistant. Made of high-quality high-speed steel material, with high hardness and high strength..
  • The entire working part of the small hole boring bar is precision ground and hardened, which is suitable for various CNC turning and milling machines..
  • The small hole boring bar is quenched at high temperature, which greatly improves the hardness, wear resistance, fatigue strength and toughness..
  • We strive to provide a product of the highest quality and the best customer experience, if you are not completely satisfied, do not hesitate to contact us at any time..
Check Stock

1/4 Inch Shank Router Collet Extension Rod Chuck Holder Extender Adapter Woodworking Milling Bit Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet 6.5mm 12.7mm, ER20 M Type Wrench Spanner

  • Made of high quality material, durable and practical to use.
  • High strength, good toughness, strong shock resistance. Make you more efficient to process products, suitable for woodworking trimming, milling, engraving machine..
  • Shank Diameter: 1/4"(6.35mm), Accept Shank Size: 1/4" & 1/2" Shank, Extend Length: 2-1/4".
  • This router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. Extend the bit to provide the full depth of cut and eliminate the dangerous..
  • Easy to Use- Place the router collet extension shank in the 1/4-inch router collet and the router bit shank in the extension collet and tighten both.
  • M Type ER20M wrench included. Need M Type ER20M wrench to tighten the collet..
  • Eliminate the dangerous temptation of withdrawing the shank from the collet, extend the bit to provide the full depth of cut instead of short shanking your router bits. Widely used, boring, milling, drilling, silk attack, sculpture, CNC, and other processing, for professionals and hobbyists demanding..
  • Package including: one 1/4 Inch shank collet extension, one ER20 6.5mm Collet, one ER20 12.7mm Collet, one M Type ER20M wrench.If you're not satisfied with our products for whatever reason, just contact us, we will try our best. Do not....
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock