Reviews Micro Jst 2connector Kit

ShareGoo 4PCS JST Plug Splitter,JST Male Female Y Cable,JST Y Parallel Adapter Splitter Harness for Traxxas TRX-4 1/10 RC Car Crawler ESC Battery Motor Cooling Fan,15CM/5.9"

Package includes 4PCS JST Y Cable.These are 1 Male to 2 Female Y Harness,1 Male to 3 Female Y Harness,1 Female to 2 Female Y Harness,1 Female to 3 Female Y Harness.They are special for Traxxxas car,alao can used for HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car..
The Male to Female Y Harness(Dual Fan Wiring Harness)can allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch..
The Female to Female Y Harness are used for TRX-4 ESC,it alows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time..
Also can be used on most mini RC helicopter and indoor 3D plane,great for small Lipo and NiMh connection..

Suitable for micro connector pins,capacity range 0.03-0.52mm /32-20AWG.
Only one time crimp needed : Double-layer jaws crimps conductor and insulation sheath simultaneously.
Wire Electrical discharge machining(EDM) Cutting jaw can make sure the surface of the jaws are smooth to avoid the terminals be stucked and offer excellent crimps.
Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR.
Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc..

‒ XING Nano 0802 22000KV motors are suitable for 1S brushless drone - iFlight a65 whoop.
‒ Perfect for indoor high-speed flying, the power of 22000kv motors are obviously improved with the flight time of 2:40mins..
‒ Shaft diameter is 1.0mm, come with Micro JST-1.25 3-pin connector, convenience for installation.
‒ Recommended parts: iFlight a65 frame,SucceX F4 1S 5A AIO Whoop Board,31mm 4blade propeller.
‒ Package included: 4x XING NANO X0802 Brushless Motor , 4x Motor Screw Pack..

20 Pieces Arcade Wires for Zero Delay Arcade USB Encoders,Compatible with All Arcade Buttons and Joysticks with Micro Switches..
A useful tool for your DIY arcade project..
One side is JST XH2.45 Male Connection plug, the other side are 0.187 inch(4.8mm) terminals plug for arcade buttons / arcade joysticks..

Ideal for micro connector pins with capacity 0.03-0.52mm² 32-20AWG.
Typical parallel crimping type ensures stability and power equality and improves 30% of the crimping-tightness.
Double-layer Wire Electrical discharge machining(EDM) Cutting jaw crimps conductor and insulation sheath simultaneously.
Easy to operate with well-made ratchet mechanism and light environment-friendly handle made of TPR.
Suits Molex CLIK-Mate,Molex PicoBlade,JST SHD,JAM,TYCO D-100,etc.

Ultra micro radio control airplane with durable, lightweight construction - suited for flying almost anywhere, with speed, plenty of power to hover, and unlimited vertical performance.
Twin, brushless motor power and delta wing design provide a unique flight experience with a performance range that includes smooth sport flying, basic aerobatics and aggressive 3D flight.
Differential thrust adds yaw control and ability for more experienced pilots to perform advanced aerobatic maneuvers including harriers, amazing flat spins and more.
Stability and precision of AS3X 3-axis technology with optional SAFE Select for stabilization and self-leveling in Beginner, Intermediate and Advanced Modes.
REQUIRES (sold separately): Full-range 5+ channel Spektrum DSMX/DSM2 Transmitter, 1S 3. 7V 500mAh LiPo with JST Connector, and Compatible LiPo Charger.

JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys A949 A959 A969 A979 K929, Ex ceed RC cars and other RC vehicles. Lipo battery with PH2.0 plug can be used for A xial SCX24 most 1/10 1/16 1/18 1/24 racing car RC trucks.
Wide application: This battery can fit most 2S JST or PH2.0 plug remote control devices. In addition to fit for RC cars, this battery can not only power drones or RC Boats but also be used in the transmitter of them.
AB clip special design: AB clips in 2S RC battery's XH-3pin charging connector, which can enhance battery durability, protect the battery charging cable and help you plug and unplug the charging cable quickly and easily.
300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of high-efficiency, safe and fast charging and discharging efficiency.
Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can reduce the weight of your drone or RC car and provide huge power support.

Type: 2 x JST-XH 4S LiPo Battery Balance Charging Extension Wire, ideal for all types of R/C (Cars, Boats, Planes).
Connector: With balance charger male and female JST-XH plug, wrks with 4S batteries with a JST-XH balance plug..
Material: Made of 22AWG soft SR wire, 15cm length, shrink tube protected female end, fine workmanship, suitable for large current charging, durable to....
Convenient & Practical: This Extension Lead is for connecting the Lipo Balance Lead to your charger, making it much easier to connect because the....
Wide Use: Apply to Most Lipo Battery Chargers, such as: Dualsky, Align, hexTronik, Flightmax, Zippy, Rhino and many other brands of lipo packs..