Reviews 3 Pin Jst Sm Plugs

ALAMSCN 30 Pairs JST-XH Connector Kit, XH 2.54mm 2/3 / 4/5 Pin Header Male and Female Connectors Plug Adapter with Flat Wire Cable 150mm 24AWG Compatible with JST XH

  • Quantity: 10 x 2pin male plug with cable + 10 x 2pin female plug.
  • 10 x 3pin male plug with cable + 10 x 3pin female plug.
  • 5 x 4pin male plug with cable + 5 x 4pin female plug.
  • 5 x 5pin male plug with cable + 5 x 5pin female plug. 30pairs in total..
  • 24 AWG JST XH 2.54mm 2/3/4/5 pin micro male connector match well with female connector, easy to install and usem, meet your different installation needs..
  • Material: Tinned copper wire, plastic head at each end..
  • Widely used in mini RC helicopter，LED strips，electrical appliances, automobiles, robots, lighting, toys,batteries etc..
Check Stock

4.8V 250mA AC Wall Charger Replacement Spare Part Compatible with Haktoys HAK101 Invincible Tornado Twister RC Acrobatic Stunt Car

  • Input: AC 110V-240V 50/60Hz, Output: DC 4.8V - 250mA.
  • Estimated charge time: 2-3 hours Do not over-charge and over-discharge the battery.
  • Works with Haktoys HAK101 RC Stunt Car and other compatible RC products.
Check Stock

750 Pieces 2.0mm JST-PH JST Connector Kit. 2.0mm Pitch Female Pin Header, JST PH - 2/3 / 4 Pin Housing JST Adapter Cable Connector Socket Male and Female, Crimp DIP Kit.

  • JST 2.0 mm (0.079 inch) PH - 2 / 3 / 4 Pin Housing. (150 pcs).
  • JST 2.0 mm (0.079 inch) B2B / B3B / B4B -PH-K-S Through-Hole Type Shrouded Header. (150 pcs).
  • Two-Sided Compartment Parts Box - 10 Compartments Package..
Check Stock

AKZYTUE 3.7V 720mAh 702348 Lipo Battery Rechargeable Lithium Polymer ion Battery Pack with JST Connector

  • Please watch + Pin and - Pin / Black wire and white wire on the JST connector.
Check Stock

40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit Compatible JST SYP Futaba for Hitec Spektrum RC

  • Includes 20 sets servo male, 20 sets female connector, 20 sets red male SYP 20, sets female SYP connector, 3 meters long 22AWG cables, and a tweezers in one box. Easy to store.
  • The black connector compatible with Futaba and JR connectors. Ideal for servo extensions DIY, repairing servo connectors. The red connector compatible with JST SYP connectors. Ideal for power cable..
  • The cable is 3 meters long 3P wires, and 22AWG. The conduct is made of multi-core tined copper, which is strong and can endure enough current.
  • Each set includes connector housing, protective connector housing and crimp pin connector..
  • The servo connector is 2.54mm pin spacing and the red connector is 2.5mm pin spacing.
Check Stock

ALITOVE WS2812B LED Strip Individually Addressable RGB LED Pixels Light Strip 3.3ft 60 LEDs Programmable Dream Color Digital LED Ribbon Lights 5V DC, Compatible with Arduino Raspberry Pi, Pack of 2

  • 【WS2812B Individually addressable LED】Each pixel can have its own color and brightness. You can control them individually and set them to any color. 256 gray levels adjust and 16777216 color full color display..
  • 【Support Many Controllers】Compatible with Arduino, Raspberry Pi, Teensy,Fadecandy, T1000S,K1000C etc programmable controllers. Support SP105E SP108E SP110E app controllers, SP106E SP107E music controllers, SP501E and MHCTRWF5V smart WiFi Controllers..
  • 【Pre-cut & Chainable 】 The LED strips are pre-cut at 3.3ft/1m. Each one has 3pin JST-SM connectors on both ends, allowing multiple strips to be connected together to extend length or make corner. Very convenient to use, reducing much cutting and welding work..
  • 【Easy to Install】 Self-adhesive tape on back makes it easily mounted on dry and flat surface. Flexible FPCB makes it freely bent to the shape you want to match the mounting place. It also has separate 5V+/GND wires on the end. You can also inject power for each strip in case of voltage drop..
  • 【Wide Application】 Widely used to make led screen, led wall, advertising board and applied to hotel, KTV, bars, Outdoor advertising signs, wedding party lighting, home and car decoration, city skyline, building outline and so on..
Check Stock

MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display & 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin

  • 2. Better 2.4GHz antenna design and impendence matching.
  • 3. Basic low power design (800uA in deep sleep).
  • 4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please get the example link from the product description below.
  • 5. Add Vext power output pin, users can use this pin to drive some external device (sensor, motor etc.), when system need into deep sleep mode, Vext can be turn off. This pin was controlled by GPIO21, for example: Turn ON: digitalWrite(21, LOW).
  • 8. Circuit optimization, system more stable.
  • After some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires. Thanks a ton for every customer's suggestion and support..
  • This product interface is JST1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors， The maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or po....
Check Stock

Tenergy Align Balancing Cable 7.4V 2-Cell LIPO car Battery Packs

  • Align balancing cable for Tenergy LIPO car battery packs. 22Awg PVC wire with JST 3-Pin connector..
Check Stock

Hilitchi 560Pcs 2.54mm 2/3/4/5 Pin Housing and Male/Female Pin Head Connector Adapter Plug Set Perfectly Compatible with JST-XHP

  • Product Name: High quality 2.54mm 2 / 3 / 4 / 5 Pin housing and Male / Female Pin Head Connector Adapter Plug Set Compatible with JST-XHP.
  • Recommended crimping tool: B016B39EPQ (Search "B016B39EPQ" in the Amazon search box).
Check Stock