Reviews Low Pressure Valve Stems

SAFELIFE Bike Straight Presta Valve Tire Air Chuck 1 PC, L-Type Schrader Tire Chuck 1 PC for Bicycles, Motorcycles, Medium & Small Cars - 1/4" NPT Open Flow

  • Ready to use tire chuck air tool(2 pack), compatible with any gauge or air compressor using 1/4" NPT threading. L-type：1.34*0.63*1.77 inch.
  • Built to last from solid brass, corrosion-resistant. Presta Valve bicycle air chuck features straight angle to get in between spokes of tires to access valve stem with ease. Schrader Valve car air chuck with 90 degree body easy access to hard-to reach tire valve stems..
  • Straight air chuck engineered for bicycle tires that use Presta valve stem systems - including mountain bikes (MTB) and road bikes. L-type air chuck suitable Schrader valve tires for bicycles, motorcycles, and small and medium-sized vehicles..
  • Open flow technology air flow freely through chuck, no check valve. Perfect for inflating tires by using an attached air compressor, or simply checking pressure and deflating by using a compatible tire pressure gauge..
  • Package includes： 1 PC Presta Valve Tire Air Chuck.
  • 1PC L-type Schrader Valve Tire Air Chuck.
  • A reasonable combination meets your different needs..
Check Stock

MENSI Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit

  • Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread.
  • Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000).
  • Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm.
  • Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar).
  • Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip).
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

4Pcs 1/8' NPT Tank Valve, A.I.FORCE Air Compressor Tank Fill Valve with Anti-Corrosion Brass Schrader Valve and Caps, 4Pcs Extra Replacement Valve Stems Cores and Schrader Valve Tool

  • [WHAT YOU GET] – You will get 4Pcs 1/8" NPT Tank Valve with built-in Schrader valves and valve caps, 4Pcs Extra Replacement Valve Stems Cores and 1Pc Schrader Valve Tool..
  • [MAIN FUNCTION] – The air compressor box filling valves can prevent air from leaking out while allowing for air to pass through for inflation. The 4 extra Schrader Valves work for replacement valve core. With Schrader Valve Tool, we can tighten the valve core or replace Schrader Valve if there is a leakage..
  • [WIDE APPLICATION] - The 1/8" Male NPT Tank Valves are used for air compressor tanks to fill vessels with air. Through the Tank valve, we can fill up the vessels with our air compressors in a rapidly speed..
  • [SPECIFICATIONS] – The air tank valves with 1/8'' NPT Male Threads and Schrader Valve. Max working pressure 200psig and Do not Exceed Maximum pressure. Teflon or similar tape can be used during install on the threaded area that screws into the tank etc..
  • [HEAVY DUTY DESIGN] – The 1/8 schrader valves are made of solid brass, which is durable, rustproof and durable. Nickel plating valve stem core can effectively prevent rust and corrosion..
Check Stock

4Inch Dually Valve Stem Extenders,Set of 2Pcs,Heavey Duty,100mm Straight Metal Dual Wheel Valve Stem Extensions for Truck Tires, RV Tires, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer

  • 【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【DESIGNED FOR HEAVY LOADS VEHICLES 】High temperature 100% leak-tested nickel-plated copper valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
  • 【PREMIUM MATERIAL】Made of nickle plated brass,more durable and used for many years as metallic luster as new.Total length 4" (100mm). Not for use with rubber valve stems..
  • 【EASY INSTALL&SAFETY】Solid 3/8" hex nut,fast installation with a deep wall socket or wrench.With no-swivel hex base,secure fixtion,no leakage after long-term use..
  • 【PACKAGE INCLUDE】2 PACK 4Inch/100mm PREMIUM Brass valve stem extensions,metal valve core remover caps and aluminium alloy valve core removal tool..
Check Stock

6 Inch Dually Valve Stem Extenders,Set of 2Pcs,Heavey Duty,150mm Straight Metal Dual Wheel Valve Stem Extensions for Truck Tires, RV Tires, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer

  • 【PERFECT SOLUTION】Check your inner dual wheel tire pressure difficult ?Start. Right Now!Just Install this schrader valve stem extension.Fast and effortless make regular tire pressure checks，increase you safety on the road..
  • 【DESIGNED FOR HEAVY LOADS VEHICLES 】High temperature 100% leak-tested nickel-plated copper valve cores and rated up to 150 PSI.Perfect fit for Truck tires, RV, Motorhome, Coach, Pickup, Motorcycle, Bike, Trailer or other heavy dualies wheel vehicles, etc..
  • 【PREMIUM MATERIAL】Made of nickle plated brass,more durable and used for many years as metallic luster as new.Total length 6" (150mm). Not for use with rubber valve stems..
  • 【EASY INSTALL&SAFETY】Solid 3/8" hex nut,fast installation with a deep wall socket or wrench.With no-swivel hex base,secure fixtion,no leakage after long-term use..
  • 【PACKAGE INCLUDE】2 Pack 6Inch / 150mm PREMIUM Brass valve stem extensions,metal valve core remover caps and aluminium alloy valve core removal tool..
Check Stock

Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool

  • All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool..
  • Valve Stem Puller - For installation or removal of snap in type tubeless tire valves.
  • Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good.
  • 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves).
  • Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool.
Check Stock

gohantee Fire Ring Burner Valve Assembly Kit, 12 inch Stainless Steel Fire Pit Installation Kit for Propane Gas, Replacement Parts for Propane Gas Fire Pit, Outdoor Fireplaces 90000 BTU

  • [ WIDE APPLICATION] The Installation Kit replacement for propane gas fire pit, compatible with fire pit system with low pressure less than 90000 BTU, please do not use it in high pressure fire pit system to avoid damaging your equipment..
  • [UNIQUE DESIGN] The kit includes 5FT low pressure QCC inlet connection propane regulator and 5FT low pressure extension hose with key control valve, which can meet your fire pit installation needs. The control key valve can be opened and closed to control the gas entering and the fire can be adjusted by controlling the gas entering. Improving propane burn efficency, reduces sooting normally associated with propane. Worked perfectly for your outdoor propane fireplace project..
  • [ PREMIUM QUALITY ] Air mixer valve kit made of 304 stainless steel and brass with connector 3/8" male fitting, making them extremely durable. 90 degree elbow air mixer valve is good for the constructions. Strict quality control standards to build and test and ensure you safe leakage free operation while providing excellent weather resistance..
  • [EASY TO INSTALL] This propane fire pit installation kit including 12 inch double burner ring with includes 5FT low pressure QCC inlet connection propane regulator and 5FT low pressure extension hose. Pret....
Check Stock

Swpeet 65Pcs Tire Valve Stem Tool Remover & Installation Set, Valve Caps Snap-in Valve Stems with Valve Stem Cores, Single and Dual Head Tire Valve Core Remover Tool, 4-Way Valve Tool for Most Cars

  • 【 What You Get】------ In this kit, You will get 65Pcs Tire Valve Stem Tool Remover & Installation Set. Including 30Pcs valve core(golden, silver).
  • 10 pcs slotted-head valve covers 1 pcs 4-ways valve tool.
  • 1 Pcs Dual Head Valve Core Remover. Suitable for all standard valve cores..
  • 【 Tire Valve Caps and Valve Core Seal Kit】 ----- Universal Tire Stem Valve Caps – These dust covers for wheels help keep tires inflated at the proper level on bikes, cars, SUVs, trucks, and other motor vehicles. Each car tire valve cap also has grips around each dome shape to make it easier to grab and tighten it with your fingers on the fly..
  • 【 Valve Installation and Removal Tool Kit 】------ Dual and Single Head Valve Core Remover: Handy tool designed to remove and install standard valve cores more simple and quick.Made of plastic,and metal, light weight, easily carry.☆4 way valve tool: Multifunction- Great for remove / install valve cores.
  • Re-threading and cleaning inside & outside threads.
  • Remove small stone.Perfect one for removing old leaky or faulty valve stems..
Check Stock