Reviews Low Pressure Adapters

ABN AC Radiator Funnel Fill Kit - Spill Proof Coolant Flush Set Radiator Bleeding for Refilling Coolant No Spill Bleeder

  • ... coolant system without stressing about spilling the coolant liquid on your engine or garage floor.
  • Smooth plastic construction and funnel stopper prevent liquids from making a mess in your workspace.
  • [Easy to Use]: Use one of the provided adapters and attach to the mouth of the system.
  • Push down on adapter, release pressure, twist until it clicks.
  • Pour in coolant fluid until level stops dropping.
  • Watch until air bubbles no longer come to surface.
  • [Safety First]: Ensure that the system is shut off (completely cooled down) and coolant hoses are free of pressure before performing maintenance.
  • Coolant liquid in the vehicle’s system will get scalding hot while engine is in operation.
  • The pressure in the system will make the coolant spray out if not cooled.
  • [Fit for Your Tool Kit]: Coolant flush kit includes (1) transparent funnel with plug, (2) 45-degree angle elbow extenders, (1) 5-inch (12.7cm) straight extender, (1) attachment tool, (3) caps with threaded adapters, (3) rubber rings, (2) tubes, (1) funnel cap.
  •   Large funnel of coolant bleeder kit can store all pieces.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Stant 12036 Cooling System Pressure Tester Threaded 'System' Adapter

  • Stant’s Engine Cooling System Pressure Tester adapters make it quick and easy to hook up a Stant Cooling System Pressure Tester to just about any automotive cooling system.
  • Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle’s coolant filler neck to the Coolant Pressure Tester.
  • The 12036 Tester System adapter allows the testing equipment to attach to the vehicle’s filler neck.
  • Fits many late model Audi, Porsche, and Volkswagen cars.
Check Stock

OTC 5613 Vacuum/Pressure Gauge Kit

  • Ideal kit for testing vacuum lines and components.
  • Accurately tests low-pressure fuel systems.
  • Quickly diagnose internal engine problems such as bad rings valves and leaking head gaskets.
  • Pinpoint hard to find problems such as cracked lines.
  • Kit comes complete with adapters for most applications.
  • sturdy blow molded hard case with removable lid keeps contents protected and secure when not....
Check Stock

STYDDI Pressure Washer Quick Disconnect Adaptor Set, M22-15mm to 3/8\ Quick Release Couplers, All Solid Brass Connector Compatible with Sun Joe, Campbell, MI-T-M, Stanley Electric Pressure Washers

  • MAKE SET UP AND TEAR DOWN OF YOUR PRESSURE WASHER SYSTEM A BREEZE - STYDDI quick connect adapters convert the screw connections of a pressure washer system into quick connect/release, allowing you to quickly and easily connect or remove a high pressure hose. This quick connectors kit also helps to preserve the thread and seals on your components, extending the life of your pressure washer system..
  • 4-PACK UNIVERSAL PRESSURE WASHER QUICK RELEASE CONNECT SET - This pressure washer quick connect adapter set converts the M22-15mm thread-on couplings to a 3/8 inch quick connectors. It includes 1 x M22-15mm female + 3/8" quick connect plug, 1 x 3/8" quick connect socket + M22-15mm male, 1 x M22-15mm female + 3/8" quick connect socket, 1 x 3/8" quick connect plug + M22-15mm male..
  • ALL SOLID BRASS FOR A SAFE AND LEAK-FREE CONNECTION - These quick connect adapters are all made of premium 100% brass, which is corrosion and rust proof. They are durable and sturdy, providing a secure and firm connection without water leak or pressure loss. They are no only convenient for frequent connect and disconnect but also offer a long service life without much maintenance..
  • TOP PERFORMANCE AND WIDE APPLICABILITY - These quick connect adapters provide secure and quick connectio....
Check Stock

ATD Tools 3300 Cooling System Pressure Test Kit

  • Hand pressure pump with color coded 0-35 PSI gauge and push button pressure relief valve.
Check Stock

OMT 4 Way AC Diagnostic Manifold Gauge Set, Fits R134A R410A and R22 Refrigerants, with 5FT Hose, 3 Tank Adapters, Adjustable Couplers and Can Tap

  • A/C DIAGNOSTICS: Professional 4-way air conditioning diagnostic manifold gauge set for R134A, R410A, and R22 refrigerants. Designed for checking pressure in AC lines, leak determination, freon top-offs, recovery work, and complete evacuation & recharges..
  • COLOR CODED HOSES: Include 4 five-foot freon charging hoses in 4 colors for easy recognition: red for high pressure, blue for low pressure, yellow for the refrigerant bottle, and black for the vacuum pump..
  • ADVANCED PRESSURE GAUGES: Blue Gauge (low): 0-550 PSI, Red Gauge (high): 0-750 PSI. Extra-strength hoses with burst pressure at 4000PSI, Max working pressure: 800PSI. Fahrenheit degree units with an easy-to-read instrument panel..
  • DURABLE CONSTRUCTION: Made from solid brass, aluminum, PVC, and durable plastic to stand up to heavy use and accidental drops - ideal for professional auto mechanics. Includes a detailed parts diagram and step by step instructions for DIY novices..
  • A COMPLETE TOOL KIT: You will get: 1pc 4-way gauge (1/4" male), 4pc hoses (1/4" female), 2pc adjustable couplers (1/4" male), 1 adjustab....
Check Stock

Twinkle Star 2 Pack Metal Spot Sprinkler, 360 Degree Square Circle Pattern Sprinkler with Gentle Water Flow, Hose Sprinklers Coverage Area Up to 30FT for Small Area Yard Lawn Garden Watering

  • Heavy Duty Garden Circle Pattern Sprinkler: The sprinkler is made of high quality solid alloy metal. The upgraded design not only looks polished but is robust much more sturdy and durable than other plastic sprinkler..
  • Small Area Coverage Watering: Low-pressure sprinkler, the coverage area is up to 30ft diameter. Low pressure lawn sprinkler, the distance of water jet is related to the water pressure. Maximum pressure up to 80psi..
  • Gentle Watering: Circle pattern sprinkler make the water fall 360 degree like rain, ideal for regular watering of lawns and garden areas. Gentle water for kids and pets have fun in the sweltering summer..
  • Fits Standard Garden Hoses: No adapters necessary! The most commonly US standard 3/4 inch internal thread fittings, suitable for a variety of garden hoses. Equipped with rubber O-rings provides a durable tight seal to avoid leakage..
  • Widely Application: Our small yard sprinklers are perfect for agriculture, lawn, garden, patio, greenhouse, flower bed, swimming pool misting fog cooling irrigation and so on..
Check Stock

Mtsooning R134a AC Refrigerant Recharge Hose Kit, R12 to R134A Low Pressure Retrofit Valve with Air Conditioning Pressure Gauge for Car Air Conditioning Refrigerant System

  • HIGH QUALITY: R134A Vavle, Coupler and Adapters are made of aluminium alloy, for high heat resistance durability and safety..
  • WIDE COMPATIBILITY: R134A can tap fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance. Used to check low side pressure for accurate fill of your air conditioner.
  • SIZE: 1/2’’ female x 1/4’’ SAE male can tap opener, 15’’ recharge hose, 13mm R134A low pressure quick coupler, 1.97’’ length gauge, fast conversion adapter valve working pressure: 1.6Mpa~3.2Mpa, max thread: 1/4" Thread, min thread: 8v1 thread..
  • INSTALLATION: AC recharge kit has 90 degree Push & Lock coupler for easy using. Come with gauge for easily viewing during use and getting a correct charge. The valve can prevent accidental venting of refrigerant..
  • PACKAGE INCLUDES: With 1/2’’ freon can tap, recharge hose with gauge and R134A low side quick coupler, R12 R22 R502 screw to R134A fast quick conversion adapter switch with dust cap, 4pcs oil detection cottons..
Check Stock