Reviews Level Meter Series
48V Battery Fuel Gauge Indicator, Golf Cart, Yamaha,EZGO, Fork Lifts,Club Car,LED Battery Indicator Meter Gauge
- 【48V Battery Fuel Gauge】The 48 Volt Led Battery Meter compatible with Golf Cart Club Car EZGO Yamaha 48 Volt LED Battery Gauge Meter, Works with 48V Lead-Acid Batteries in Golf Carts, Forklifts, Trucks, Scooters and More..
- 【LED Battery Indicator Meter】10 segment LED Bar Graph display, 10% per segment:3 color LED display,different light displays different battery level visually.
- LED flash for low charge&high charge warning.
- 【Note】The second LED from the left flashes as a warning that the batteries voltage has been discharged to 80% of their capacity.It is strongly recommended to recharge the batteries when you get to the 3rd Yellow LED, this is a safety precaution to avoid dead batteries.
- 【 Installation Notes】Make sure your "C" terminal is either connected to the Battery "+" or a Key switch, Meter will scan from full to empty then shuts off .Meter will stay full position while first is connected with batteries and indicate the actual battery level after 155 seconds..
- 【 Battery Indicator】The 48V Battery Indicator is made of high quality ABS material, waterproof, heat resistant, reliable performance.Displayed with 10 segment LED bar graph (1 Red, 2 Yellow and 7 Green LED), different light displays different battery level..
Check StockDecibel Meter Wall Hanging Sound Level Meter 11 inch Large LED Display Noise Temperature Humidity Meter with Alarm Icons Indicator Wide Applications for Classroom Studio Home Factory
- ✅【Large 11'' LED Display】: DANOPLUS decibel meter equipped with 11 inches screen and brightness adjustable, which allow to see the real-time decibel level , Temperature and Humidity clearly..
- ✅【 AUTO Alarm Icons】: the noise alarm face icon will automatically switch when the decibel at different level. 【Green Icon】Less than 60dB.
- ✅【High Accuracy】Decibel Level Measuring Range: 30~130dB , Accuracy: ±1.5dB.
- ✅【User-Fridendly】DANOPLUS sound meter powered with 2000mAh Lithium battery, 9.8 feet(300 cm) length USB cable for charging, don't worry the USB cable is not length enough..
- ✅【Wide Applications】: This Large LED display Decibel Meter can be mounted on the wall or placed on the table, it's an ideal noise meter to test the sound level in Classroom, Studio room, traffic routes, factories, construction site, home, offices, etc..
Check StockGas Tank Fuel Gauge Meter Fits for Yamaha Grizzly 600 Big Bear Kodiak 400 ATV Gas Tank Cap Fuel Level Gauge Replacement 4SH-24260-11 4SH-24261-00
- Fitment: The fuel gauge meter fits for Yamaha Big Bear 400 2000- 2012, fits for Yamaha Kodiak 400 1996-1998, fits for Yamaha Grizzly 600 1998 -2001.
- Replace Part Number: 4SH-24260-11-00 4SH-24260-10-00 4SH-24260-00-00 4SH-24260-01-00 4SH242601100.
- Measure the Fuel Level: The float of the fuel level gauge moves accurately and quickly, and it will display the remaining fuel level in the fuel tank. It is perfect for anyone who is building a custom dashboard or wants to replace their inventory fuel level gauge.
- Durable and Rust-proof: Black aluminum bezel, polished edges, scratch-resistant curved glass lens, GUZIKO fuel meter is very fit, upgraded anti-aging and anti-corrosion seal to ensure no gas leakage or unpleasant smell, durable.
- Easy to Replace: Use flat head screw driver to pop old ring off, push gas meter in the slot until it can't go any further, place new ring over top of meter and tighten it, the installation is complete.
Check StockAirKnight 3-in-1 Decibel Meter Sound Level Reader + Humidity & Temperature. Classroom Noise Meter, Sound Meter, SPL Meter & DB Meter Wall Mounted. Sound Level Meter, Decibel Reader Noise Decibel Meter
- ✅ KEEP IT DOWN!!!: The AirKnight digital dB meter is just what the doctor ordered! Now, you’ll have exactly the authority (and numeric proof) you need to tell your kids, colleagues, classroom, band, or that noisy neighbor to “take it down a notch.”.
- ✅ EXTRA LARGE LCD DISPLAY & WALL MOUNT: Our digital sound level meter is equipped with a high-definition backlit LCD screen, so that you can effortlessly read it throughout the day at your convenience. Unlike handheld sound level meters, our premium wall-mountable dB meter is simple to set up and perfect for continuous monitoring..
- ✅ VERSATILE & LONG-LASTING: Our classroom noise meter can be used all over your space. It’s wall mountable with a 10ft power cord, flat-bottomed for placing on tables, and lasts for hours unplugged with a 2000MaH battery. Also, it can be a home theater SPL meter by the TV or in your garage workshop..
- ✅ BONUS FEATURES: We’ve included bonus HUMIDITY and TEMPERATURE readings in addition to bringing you the best decibel meter we could. And to top it off, the AirKnight sound level tester has 3 ADJUSTABLE SPEEDS (1. Fast 2. Medium 3. Slow) to make reading it a breeze..
- ✅ 2 YEAR WARRANTY AVAILABLE: AirKnight is an American company that works tirelessly to ensure the ov....
Check StockYINMIK Digital pH Meter TDS Meter Combo Accurate Measurement for pH TDS EC Temp with ATC, 2nd Generation Water Quality Tester with Horizontal Display for Hydroponic Swimming Pool Aquarium
- [Fully Meet the Needs of Hydroponic Growers] pH Meter: Monitoring the pH level of the hydroponic nutrient solution to ensure it can be maximum accessed by the plants. TDS & EC Meter: Keep tracking of the amount of nutrients in your solution to prevent it from being too high or too low and hindering the healthy growth of plants..
- [Helpful for Aquarist] pH Meter: Keep the balance of pH value of fish tank, drastic fluctuations in pH value can seriously damage the survival environment of fish. TDS & EC Meter: Monitor the amount of ionic salts in the tank to remind fish keepers when to change the water to balance the ratio of various substances..
- [Friendly for Pool Owners] pH Meter: Keep the pool water at the right pH level, which is friendly to swimmers' skin and eyes. TDS & EC Meter: Keep the TDS value of the pool water appropriate can extend the life of the pool equipment..
- [2nd Generation pH TDS Meter Combo] Tired of using 1st generation yellow ones with small vertical reading display? The screen of YINMIK 2nd pH TDS meter combo is designed for horizontal display, when you check the pH TDS or EC value, you c....
Check StockMagpie VH-80, Bilateral Laser Distance Meter + 2 Professional Magnetic Laser Target Plates
- MEASURE DISTANCES FAST AND EFFORTLESSLY: Do you want to measure long distances, but there’s no one around to help you? The world’s first bilateral laser measurer is the tool you need to get the job done conveniently. This unique measuring device can measure any distance up to 262ft (80m) safely and conveniently without having to strain your body or use dangerous positions. Every professional construction worker and DIY'er needs this smart gadget..
- Essential tool for Laser Distance Meter and Laser Level products. Best target plate for laser distance meter, laser level, laser measure, cross line lasers, alignment, rotary lasers, and all green and red beam laser level products (compatible with green and red lasers)..
- Buy one and get one free! Two target plates per package. Especially for the VH-80 Magpie Bilateral Laser Distance Meter..
- Magnet strip & Stand. Use it as a guide for measuring distances with a laser distance meter in situations where there is no reflective surface. Use the built-in stand or magnetic strip feature to position it. Scale displays both inches and centimeters..
Check StockMESR-100 Capacitor Tester, Geevorks ESR Meter in Circuit Capacitor Tester Up to 0.001-100.0R, Auto-Ranging Ohm Meter
- This MESR-100 auto-ranging capacitor ESR and low Ohm meter measuring range from 0.001 to 100.0R, support in circuit testing..
- Capacitance meter is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C).The impedance become small, and we can then measure the true series resistor value..
- Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a r-esult we can use it as in circuit test..
- Dual terminal, for fast and easy inspect internal resistance of the capacitor, a printed ESR table for fast check..
- Note:The Capacitance Meter is used for testing the internal resistance of the capacitor, not for testing capacitance value.[Note: without SMD test clips].
Check StockMOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle
- MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
- Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
- Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
- Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
- One-year Limited Warranty & Free Lifetime Technical Support.
Check StockGlucose Test Strip Control Solution – Level 2 & 3
- ACCURATE & RELIABLE - Our control solution ensures that both the meter and the test strips are functioning correctly and providing you with accurate results..
- FAST RESULTS – Test your meter and strips in a matter of seconds..
- LEVEL 2 & 3 SOLUTIONS – Our kit comes with two (2) 4mL vials of Level 2 and Level 3 solution..
- COMPATIBLE – with the Care Touch Blood Glucose Monitoring System..
- IDENTIFIES EXPIRED STRIPS – Know if you’re using expired test strips, and test a new batch to make sure they’re accurate..
Check Stock