Reviews Led Bar 4 3

ASIAHORSE FS-9002 Pro 20+6LED(in and Outside Light efect) ARGB Black 120mm Pwm Case Fan with 5V PWM Motherboard Sync/Analog Controller (5 Pack)

  • 1. Out Frame- 20 lights, In Frame 6 lights, 26 lights in total by Design. With RGB three colors, you can freely combine the best light effect without any defects..
  • 2. Enhanced shaft and Thermostability oil Design -The axis silicon steel plate uses a high level of 12 pieces, which greatly enhances the stability and heat dissipation of the fan，Add High-And-low temperature antiwear oil to make the fan quieter and prevent the oil from melting under high temperature..
  • 3. Analog ARGB controller - low-profile pc case without RGB Cable motherboards. Choose from 4 Preset colors (red, green, blue, White, rainbow 1.0, and rainbow 2.0), Hundreds of LED modes and off mode (wave, full light, RGB spectrum, off, flow, ripple, pulse, and blink), and 4 LED speeds..
  • 4.Pwm Fan and Pwm Controller - After connecting to the PWM interface of the motherboard, The speed of the fan can be read through the motherboard software, Also the motherboard can automatically control the speed of the fan according to the temperature of the chassis，Efficient energy saving and environmental protection..
  • 5.New Soft Led Light Bar design-Can effectively protect the LED lamp from damage due to excessive tension when bending,The new LED light bar also increases the purity of the LED lamp..
Check Stock

YITAMOTOR 52 Inch LED Light Bar + 2X 18W 4 Inch Spot Fog Light Pods+ Mounting Bracket with Wiring Harness for 07-18 Jeep Wrangler JK

  • LIGHT UP YOUR ROAD: Features a Durable die-cast aluminum body with jaw-dropping dual-row 27, 000 Lumens pure white light, YITAMOTOR 52" Offroad LED Light Bar+2X 18W Spot LED Light Bar Set is an ideal choice for different off-road use and will light up everything in front of you..
  • RUGGED CONSTRUCTION: The YITAMOTOR 300W led jeep light bar comes with the wiring harness and mounting brackets compatible for 07-15 Jeep JK Wrangler. 50, 000 hours of lifespan and the IP67 rating make it incredibly resistant to water and dust. Buy with Confidence!.
  • FOR ALL OFFROAD NEEDS: The combination of two 60-degree flood beam and one 30-degree spot beam of the 52 inch led light bar makes it lighter and wider to give you an incredibly clear visibility in any terrains, which helps avoid potential hazards on the road ahead. While the 18w spot led light bar can be used for lighting narrow area..
  • UNIVERSAL FIT: The led bar can be compatible for almost all Jeeps, 4x4, Trucks, Cars, Motorcycles, SUVs, ATVs, Boats. Besides that, this universal offroad led light bar also works great as driving light, fog light, or for emergence use..
  • Money Back : Making you a happy customer is our main guideline. Your satisfaction is backed by our Risk-free 30 Day Money Back , and Lifetime against a....
Check Stock

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base

  • Partsam (1 x Red ) Waterproof truck trailer Identification Light Bar, long-lasting stainless steel black bracket base, stainless hardware included. three-light, 3-LEDs each marker light, totally 9LEDs, Red Lens Red LED Light.
  • This Truck Trailer ID Light bar is great for trailer applications more than 80" wide.
  • This red clearance light bar is sealed and waterproof. Size: 350mm x 30mm x 26mm (14.17" x 1.18" x 1.1").
  • Installation scews are included. This IP67 Waterproof trailer light bar is always ready for different kinds of weather attack, and also withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weathe.
  • EAST TO INSTALL: The red strip light bar contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end.
  • Three replaceable 3-LED trailer light bar is universal for 12V Vehicles: Trucks, trailers, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, motorhome, pickups etc..
  • You can mount this 3 led light bar on the top of your truck trailer or between the tailgate taillights to draw extra visibility to your wide trailer for added on-road safety.
Check Stock

Front Winch Bumper Compatible with Toyota 2016-2022 Tacoma Guard Bull Bar W/Winch Mount 4×4 Front Bumper

  • Front Winch Bumper guard compatible with 4×4 2016 2017-2022 Toyota Tacoma. Precision designed to match your vehicle’s body lines.
  • Solid all-welded construction for maximum strength and safety. High quality steel constructions, front winch bumper guard come prepped with powder coated. Rust protection. Built to strict quality control standards.
  • 3/16″ Plate Front Bumper with 1/4″ Winch Mount,10,000 lb winch capacity (winch not included)..
  • Heavy duty mounting / recovery points that accommodate D-Ring shackles (Shackles not included). Fits 20″ LED dual row LED light bar (light bar not included).
  • Requires trimming of front bumper,easy bolt-on. No cutting and no drilling. Instruction is included. Material:Steel.
Check Stock

Vello CB-600 Straight Flash Bracket

  • 【2 Pack Dual Flash Bracket】 with 1/4 standard screw to mount on dslr camera, led light, flash light and more. Perfect for your different demand on shooting..
  • 【Adjustable Flash extension bar】 Adjustable range from 4-18cm. Allowing to attach two devices at the same time. Please check the max adjustable range for your camera or accessories before order..
  • 【1/4’’ and 3/8’’ Thread】 Dual camera mount for tripod comes with 1/4’’ and 3/8’’ thread holes at the center for tripod, light stand, handle grip, quick release plate and other support..
  • 【No-slip Rubber Pad】Dual hot shoe mount 1/4’’ screw with anti-slip rubber pad. Can protect your camera flash and led light from scratches and slipping..
  • 【High Quality】Made of aluminum material, very sturdy and durable. Dimensions: 20.3cm*2.8cm*0.5cm. Weight: 72g..
Check Stock

SHIMANO SH-XC702 Competition-Level Men's Off-Road Racing Shoe, Black, 11.5-12

  • 1.Easy installation-pre-drilled hole, allows more lights to be added on vehicle without drilling any holes in the bodywork, allen hex key included for quick installation to your roof rack, bull bar, roll cage, or headache rack..
  • 2.Wide uses- this LED light bar mounting bracket can be used on tubes of 0.75", 0.875“, 1.125",1.25” Bar mount in diameter, work with most LED, HID, halogen spotlights/fog lights/driving lights or light bars for off-road vehicles, ATVs, UTVs, trucks, Jeeps, boats, farm vehicles etc..
  • 3.Universal adjustable Tube clamp and Light weight Small Size.
  • 4.Material- Heavy duty die-cast aluminum, strong and durable, with rubber inserts dampen driving vibration and avoid scraping bull bar surface.
  • 5.Quality guarantees- 2-Year Warranty, you can get a full refund or a new replacement.
Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

  • Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
  • Dual Cold Shoe Mount- 1x integrated cold shoe mount.
  • 1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
  • Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
  • Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
  • Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..
Check Stock

Roleadro T5 Led Grow Light Bar,Grow Lights Strip with Samsung LM301B Chips & Red Full Spectrum for Indoor Plants Light with Timer Extendable LED Grow Lamp for Grow Shelf Greenhouse Plant

  • 【Samsung/3500K/ Red/6000K】Roleadro utilize the latest in high yielding LEDs technology today-Samsung LM301B diodes,delivers powerful light output and uniform canopy penetration . The 3500K Full Spectrum LED can promote the growth of the leaves and rhizome, protein synthesis.The RED light is especially useful during bloom, where it speeds up flowering time and boost yields. The BLUE light help plants with chlorophyll synthesis to intake More energy for better germination..
  • 【Auto Turn ON/OFF and Timing Function】: The timer of our LED grow strips allow you to turn it on and off at a pre-set time, which has 3H, 6H, 12H 3 timing modes, 3 color lights correspond to the 3 modes. When the indicator is off, the timing function is off. ATTENTION: This timing function is 24H cycle timing. In the case of continuous power, the cycle will work, and it will be invalid after power off. Don't worry about forgetting to turn on the light for your beloved plants when your busy work.
  • 【4 Dimmable Modes and Dual Channel Control】: Our LED plant strips have 4 adjustable brightness levels: 25%, 50%, 75%, 100%, to meet each plants lighting requirements at different stages. Dual channel control can divide 4 pcs light bar into 2 sets each of 1-2 light bar, differe....
Check Stock

LOHOME Girls LED Butterfly Wings Belly Dance Costumes Glowing Performance Clothing With Telescopic Stick for Carnival, Stage, Halloween Christmas Party

  • HIGH-QUALITY LED LAMP BEADS: The LED dance wings like the colorful stars shining in the sky when you turn on the lights, about 172 high-quality LED lamp beads make you 360 degrees shining on the stage..
  • SAFE LOW VOLTAGE: Inserting battery box to supply 4.5V safe low voltage can control the Led lights to achieve a huge stage effect, Powered by 3 AA batteries (3 AA Batteries not included).
  • MULTI-USE: The butterfly led wings perfect for Belly dance, shows, annual fancy-dress rave, carnival, stage, Halloween party, Christmas outfits, bar, photography and cosplay etc..
  • WASH INSTRUCTION: Dry Cleaning, Hang Dry, No Iron/Twist/No bleach, you can maintain it better..
  • SIZE: The length of this wing is About 47 inch, and the wing span is about 98 inch, suitable for neck about 11.8-17.8 inches, suitable for kids height 3.66-4.66 ft.
Check Stock