Reviews Dot 3 4 Brake Fluid

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..

High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1.
Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1.
Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards.
Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s.
Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years..

High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1.
Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1.
Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards.
Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s.
Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years..

✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..

Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..

Recommended for all ABS, disc and drum brake systems as well as hydraulic clutches requiring DOT 3 and DOT 4 fluids.
Provides corrosion protection for all metals within the braking system.
Compatible with all conventional brake fluids.
Substantially reduces the possibility of fluid vaporization and eventual brake failure.
Excellent performance in high-temperature braking systems.

Non-silicone based, long life and 100% synthetic, DOT 5.1 BRAKE FLUID conforms to the highest standards in brake fluid performance..
DOT 5.1 is specially designed for Anti-Locking Brake Systems (ABS)..
With a high dry boiling point of 270C and a high wet boiling point of 185C, DOT 5.1 delivers the best brake performance..
100% synthetic, polyglycol-based. Specially designed for anti-locking brake system (ABS)..
Compatible with All types of hydraulic actuated brakes and clutch systems (not to be used with silicon and mineral-based brake fluids)..

【What does it do?】 If the moisture content of the car's brake fluid is too high, it will cause the car's brakes to fail, so it is very necessary to have a brake fluid tester. You can check your brake fluid at any time..
【Application range】This brake fluid test pen supports most vehicles with DOT3 DOT4 car brake fluid, and can be used by professionals and individuals.(If you turn on the switch and all the lights are on, please remove the battery and restart).
【Easy to use】This brake fluid test pen has 5 LED indicators to show the water content in the brake fluid. Press the top button and immerse the probe in the brake fluid. After a few seconds, the LED will display the test result. The brake fluid test pen will automatically turn off after approximately 15 seconds of inactivity. (Without battery).
【Reminder】The probe of this brake fluid tester pen is made of high-precision metal material, and the test is accurate. If you need to repeatedly measure, you need to wipe the probe clean before measuring. After you have finished using it, please clean the body and probe of the test pen. This will extend the life of the test pen..
【Friendly service】 Our products are shipped from the US warehouse. If the product you received has any quality pr....

Quick and easy way to test for moisture content in the brake fluid.
LED light indicators show percentage of water in the brake fluid.
Calibrated for cars using DOT 4 brake fluid only (found in most cars produced since 2006).