Reviews Large Power Relay

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

Our coil power is 1.8W, and coil resistance is 80ohms. It is more reliable than 2.4W (60 ohms) and 4.8W (30 ohms) relays on the market.
Large capacity, high current carrying capacity, heavy-duty make/break relay. But never go beyond its capabilities, try to stay 10 to 15% below what the rate is for.
The size of the round stud terminals: M6/6mm.
Ideal for split charging or any vehicle needing a high power relay.

FEATURES: 12 position terminal block for accessory attachment.
6 40-amp cube style relays (plug-in style).
6 Diodes to prevent LED “field collapse”.
Inline 50amp manual resetting circuit breaker.
8 gauge power leads with crimped and soldered terminal for connection to the battery.
Integrated LVCO (Low-Voltage-Cut-Off) circuit.
Fuse for LVCO which can be removed to bypass the LVCO.
High-temp, abrasion resistant wiring cables.
KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.

Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino compatible board or another low powered microcontroller? No soldering needed to get started. Plug and play. Code available. Small footprint..
The Single Relay board can handle up to 5.5A at 240VAC for long periods of time and allows you to control large power loads with simple I2C commands. Utilizing our handy Qwiic system, and on-board screw terminals, no soldering is required to connect it to the rest of your system!.
The Qwiic Relay comes with a default I2C address of 0x18 but can be changed with a simple command allowing you to control over 100 Qwiic Relays on a single bus (but please be aware that toggling lots of relays on a 3.3V bus can cause voltage spikes so an external power supply will be required)!.
In addition, there is an address jumper on the back of the board. Closing this jumper with solder will change the address to 0x19..
Operating Voltage: 1.7V-3.6V. Coil Resistance: 23.5Ω. I2C Address: 0x18 (Default), (Jumper changes to 0x19). Max Current (Through Relay): 5.5A (240 VAC).

Power Relay Fuse: 30A Fuse. Our luxurious Nylon Wiring Harness Kit loads capacity is up to 400W auxiliary lights or other devices, perfect compatible with all devices that use a 12V power source..
HIGH DURABILITY - The flexible strand copper wire and nylon shell provide outstanding electrical conductivity, high temperature resistance and melting resistance..
SAFETY PROTECTION - Power relay for safety and conversion circuit, blade fuse for overload and short-circuit protection. Double protection for you to drive away from danger..
8.2 FT Length Wiring Harness - Approx. 8.2 ft of cable from relay to the lead, the wire is long enough to reach all the part you need..
Package Include - (1) 8.2 ft Nylon jacket wiring harness.

Large Capacity - This fuse and relay box can max hold 6 relays and 11 fuses at the same time, large capacity design, make multiple relay in one box, keeps your circuit neat and tidy..
40A Relay - This relay box 12v automotive will be equipped with 6 pieces of 4 pin 40A relays, provide the highest capacitance to make its application wider and safer..
Various Size Fuses - This auto fuse block will also come with 11 pieces of ATC/ATO fuses, which includes 2 x 5A, 2 x 10A, 2 x 15A, 2 x 20A, 2 x 25A and 1 x 30A blade fuses, can meet a wide range of using demands..
Convenient Pre-wired - This fuse relay box is pre-wired design, which finishes half of connection work, and only leave necessary install processes for you, makes the connection of this relay fuse box become much more convenient and easier for you..
Application - The waterproof fuse relay block aims to provide a reliable and safe environment for device using and keep the connection systems neat and tidy, suitable for auto, car, truck, marine boat, etc..

Our coil power is 1.8W, and coil resistance is 80ohms. It is more reliable than 2.4W (60 ohms) and 4.8W (30 ohms) relays on the market.
Large capacity, high current carrying capacity, heavy-duty make/break relay. But never go beyond its capabilities, try to stay 10 to 15% below what the rate is for.
The size of the round stud terminals: M6/6mm.
Ideal for split charging or any vehicle needing a high power relay.

...r's headlights, turn signals, horn and the engine starter do not work, and there is no problem with these components after detection, you can check the relay switch..
【20ft Extension Cable & Flashlight】Our circuit tester contains 20ft/242inches long cable, which provides excellent accessibility to test along the large vehicles such as trucks, buses, engineering vehicles, vessels, tractors, mining vehicles and other vehicles that use DC circuits. Moreover, it has a built-in flashlight that will illuminate your work area even at night..
【Overload Protection】Our automotive circuit tester tools has a built in 10 amp circuit breaker to prevent overloading and cooking a circuit.The output current can be reversed to form a loop power, and when the current exceeds 20A, This power circuit probe will automatically trip to protect the device and extend the service life..