Reviews Jqx 38f Power Relay

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

【Continuous Relay】 You can use it as continuous relay, if the relay keeps working for 5 hours, it would be better to stop it and then use it again . It could pass continuous 50A~60A current.
【Package Contains】 1 x Heavy Duty Split Charge 120A ON/OFF Relay.
【Large Capacity】 Up to 120A coil capacity able to handle those high current applications with ease, Heavy duty make or break (on/off) relay.
【Long service life】 Life Expectancy Electrical: 100,000 Operations (at 30 Operations/min) Life Expectancy Mechanical: 10,000,000 Operations, keep a high level in ongoing work.
【Applicable】 High Power automotive relays provide standard contact form, and has the standard 4 pin layout, fit of starter kills, dome light supervision, trunk release, polarity change, power door lock/actuator control etc.

FEATURES: 12 position terminal block for accessory attachment.
6 40-amp cube style relays (plug-in style).
6 Diodes to prevent LED “field collapse”.
Inline 50amp manual resetting circuit breaker.
8 gauge power leads with crimped and soldered terminal for connection to the battery.
Integrated LVCO (Low-Voltage-Cut-Off) circuit.
Fuse for LVCO which can be removed to bypass the LVCO.
High-temp, abrasion resistant wiring cables.
KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.

Power Relay Fuse: 30A Fuse. Our luxurious Nylon Wiring Harness Kit loads capacity is up to 400W auxiliary lights or other devices, perfect compatible with all devices that use a 12V power source..
HIGH DURABILITY - The flexible strand copper wire and nylon shell provide outstanding electrical conductivity, high temperature resistance and melting resistance..
SAFETY PROTECTION - Power relay for safety and conversion circuit, blade fuse for overload and short-circuit protection. Double protection for you to drive away from danger..
8.2 FT Length Wiring Harness - Approx. 8.2 ft of cable from relay to the lead, the wire is long enough to reach all the part you need..
Package Include - (1) 8.2 ft Nylon jacket wiring harness.

Includes 8 Jumpers to fit most popular relays.
Includes Test Lead Kit for easily and securely connecting Relay Test Jumpers to a multimeter.
Terminal Leads with switch, fuse and power options provide easy access to check current or voltage on many fuses and relays used on vehicles today.
Also allows testing of relay configurations not covered by eight Relay Test Jumpers, like Volkswagen, BMW and other European vehicles.
Relay Puller Pliers easily remove electrical relays.

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..

Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for.
12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water.
Be careful when plugging the relay into the socket. If you push hard, you will bend the female connector.
Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g.
SPDT relay: it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated.