Reviews L bracket Compatible

12Pcs Black Shelf Brackets, 5

  • Size: 125 x 75 x 20 mm (L x H x W) / 5 x 3 x 0.78 inch.
  • 【COUNTERSUNK SCREW HOLES】 Screw holes are countersunk design.
  • 【HEAVY DUTY CORNER SHELF BRACE】Durable metal corner brackets are made of high quality cast iron with black coated finish, corrosion and rust resistance.
  • The head of screw is not protruding after the screw has been screwed in, simple and aesthetic appearance.
  • 【5″x3″ RIGHT ANGLE BRACKETS】Package include: 12pcs L brackets, 72pcs screws and 24pcs expansion pipes.
  • 【WIDE APPLICATIONS】 Black 90 degree bracket is perfect for shelving systems, widely used in bookshelf, furniture, table, garden and kitchen shelf.
  • Curved design makes the edge smooth and protect your hand from scratch.
  • 【STRONG BEARING CAPACITY】 Heavy duty corner bracket has 3MM thick, thicker than other corner supports on the marketapply.
  • So the maximum support weight is 35lbs for a pair of L brackets.
Check Stock

Wind Fairing for Rack / 1165mm/1255mm(W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

Wind Fairing for Rack/ 1345mm/1425mm (W)

  • DURABLE AT ITS FINEST: This Front Runner Wind Fairing for Rack is made of Black powder coated aluminum and EPDM Rubber. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain..
  • ADJUSTABLE BRACKETS: Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust..
  • SECURED AND PROVEN GEAR YOU CAN TRUST: Easily secures to your roof rack in three simple steps. Air flows easily over the rack and accessories, reducing drag and wind noise. Create a solid appearance by covering the gap from roof to rack.Get a bold new overlanding look in minutes..
  • DIMENSIONS: 1267mm (49.9") L x 2.5mm (0.1") W x 176mm (6.9") H and consists of 1 x Wind Fairing, 4 x Brackets and 1 x Rubber Blade..
  • INSTALLATION AND COMPATIBILITY: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles. Includes all installation hardware and fitting instructions..
  • This product is only suitable for a Front Runner Roof Rack..
Check Stock

AXLIZER 4Sets Vertical Blinds L-Shaped Brackets Vertical Blinds Mounting Bracket, Clip Blind Extension Frame

  • Material: Iron galvanized. Durable, smooth surface, no scratch, not easy to break or deformation, can be used for a long time..
  • The vertical louver can be easily and safely installed on the wall. The L-shaped bracket and clip design can be directly fastened without screws, which is simple and convenient. Suitable for the internal or external installation of the vertical louver wall..
  • wingnaut operation allows easy adjustment for good installation, with 17 / 8-inch rails for easy and safe installation of vertical blinds..
  • Size: L-shaped bracket: 2 * 5 * 3.5cm / 0.8 * 2 * 1.4 inch.
  • vertical louver wall bracket, not occupying too much space in the room, durable and light weight, easy to install and store..
  • You will get 4 sets of brackets (4 L-shaped brackets + 4 clips) to meet your daily needs. The L-shaped bracket can be installed for blinds and other similar curtains..
Check Stock

ClosetMaid 2854 ShelfTrack 16-Inch Locking Shelf Bracket, White

  • ✤Good Choice of High Quality Shelf Brackets Include all Hardware. Our iron shelf brackets package comes with 4pcs 12inch frosted black L brackets with lips an and all necessary 16 screws and 8 anchors. The size of the heavy duty shelf brackets is 12”x8”x1.5” with a thickness of 0.2 inch. All our screws are made of stainless steel to ensure good holding capacity. You will buy the best shelf bracket for open shelving from us on amazon!.
  • ✤Heavy Duty Shelf Brackets Support max 110LB/pair. The material of our L brackets are high quality iron with great durability. They can support maximum 110lb per pair if properly installed. You could installed more those brackets for floating shelf if you want to use them for more heavy duty load. All our L brackets with lips have a frosted black coat and each bracket is packed in a single bag to prevent any scratches during transportation. You will not regret to buy shelf brackets here!.
  • ✤12 Inch Shelf Brackets with Wide Application and Good Decoration Purpose. Our brackets for shelves come a frosted black look and could create a rustic style for your room. The actual size of our metal shelf bracket is 12”x8”x1.5”. It can fit nominal 12” lumber board from Depot Home. The shelf bracket with heavy duty ....
Check Stock

Shelf Brackets 8pcs Corner Brace White Steel L Brackets for Shelves 5 Inch x 3 Inch Decorative Corner Brackets for Wall Joint Angle Brackets for Shelf with Screws (white-3x5 inch-8pcs)

  • ✔High Quality Iron Shelf Brackets to Support Heavy Weight. Our corner brackets are made of iron (not stainless steel) with a matte black surface finish. The weight for a pair of L brackets to support is about 33lb. If you want to use the corner brace for more heavy duty work, you could use more shelf brackets to support the shelves. All our black shelf brackets are high quality made and can be used for a long time..
  • ✔Best Price L Brackets for Shelf Choice on Amazon. Our corner brace package comes with 16 pieces matte black corner brackets and 98 screws. The package include all necessary hardware. The size of the angle brackets is 3”x5” with a thickness of 1.18 inch. Our L shelf brackets package contains more brackets while cost less than other competitors on amazon. You will make the best shopping choice from us..
  • ✔Perfect Shelf Brackets with Wide Application. Our corner brackets for shelves has a matte black rustic look and can support heavy weight with small size. The black corner brace can be used to install any kinds of shelves such as bookshelf, table legs, garden shelves and chair corners. It is a perfect decorative corner brackets for wood, especially for creating a rustic vintage style..
Check Stock

2 Pack Folding Shelf L Brackets, 16 Inch Collapsible Hardware with Locking Hinge for Garage Shelves, Holds 160lbs,

  • Shelf Brackets 16 Inch: These L-shaped shelf brackets will help you display books, photos, tools, and just everyday household items around the household.
  • perfect for the garage, bedroom, or kitchen.
  • Collapsible Hinges: Each folding bracket is locked in a 90-degree angle, but can be release by pressing and releasing the arm to fold it down.
  • Max Capacity: The folding shelf brackets can hold up to 160 pounds, perfect for a variety of items like books, tools, photos, and household supplies.
  • Dimensions: The collapsible L brackets for shelves are 16 x 6.5 inches, perfect for holding all sorts of household items.
  • What's included: A 2 pack of stainless steel collapsible L shelf brackets with 4 long screws, 8 short screws, and 4 wall anchors.
Check Stock

Airesly Projector Mount 11.8\ - 19.7\ Height Extendable with 2 Replaceable Nut, 360°Angle Rotatable Universal Projector Mount for Variety Mini Projectors, Security Cameras and DVR…

  • Compatibility: Compatible with most manual or spectrum projector screen on the market. Support maximum loading weight up to 66lbs / 30kg.
  • Quality: Made by high-quality steel 6 inches L-shape bracket will successfully hold your screen and allow the projector screen away from the wall.
  • Adjustment: Adjustable hooks to securely hold your screen 1.5” to 5” from the wall. Allowing for corner, chalkboard or television clearance and eliminating keystone effect.
  • Environment: Securely mount to wood stud, drywall, brick or concrete walls.
  • Package Includes: WALI Projector Screen 6” L-Brackets x 2, Mounting Hardware Kit x 1, User Manual x 1, experienced and friendly US based customer support available to assist 7 days a week..
Check Stock

ICT Billet Corvette LS Alternator & Power Steering Pump Bracket Accessory Kit Turbo LS1 551521X-1

  • Made In Wichita, Kansas From Aerospace Grade, USA Billet Aluminum.
  • This Kit Requires The Use Of A Corvette Or (CTSV/G8/SS) Crank Pulley (12560115) ICT Billet (BAL100).
  • Compatible With Chevy Corvette G8 SS CTS-V Z06 LS1 LS2 LS3 LS6 LS7 L77 5.7L 6.0L 6.2L 7.0L Gen III IV (1997-2013) Series Engines.
  • Included in the package is the alternator, & power steering bracket, 1 smooth pulley, and all required mounting hardware..
  • This Kit Will Place The Alternator & Power Steering Pump In The Factory Corvette Location..
Check Stock