Reviews Igbt Plasma Cutter

2021 Everlast PowerPro 256Si AC DC TIG Pulse 60a 250a Plasma Cutter Multi Process Welder

  • Digitally controlled IGBT inverter improves performance, reliability and accuracy.
  • Easy to use controls with touch pad control for process and feature selection.
  • Quick change out of torches for easy change from TIG to plasma and back to TIG.
  • Compact, yet powerful TIG welding/Plasma cutting features.
  • Make regular, low dross plasma cuts on steel up to 5/8" thick with a maximum clean cut ability of 3/4".
Check Stock

HITBOX 50A Plasma Cutter Welder Combo - 4 in 1 110V/220V 200A HF Pulse TIG Welder - Stick ARC MMA Welder High Frequency Multifunction Cutting Welding Machine with Foot Pedal (CT520)

  • 【4-in-1 Plasma cutter/welder combo】110v/220v 10-50Amp High Frequency plasma cutter max ideal cut thickness: 1/2".
  • 200amp TIG Pulse Welding Equipment allows welding thinner metals and high heat conductive metals without burning through. 200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current.
  • 【Foot pedal remote control】Synergic Control,Automatic change of the voltage by adjusting the amperage.Comes with foot remote control / proximity control with MMA, TIG welder can improve welding efficiency, reduce the hassle in pedal control current, and guarantee quality (suitable for cutting and welder). The current fast heating (hot boot), slowly down, is good for the formation of the welding pattern.
  • 【Versatile welding, cutting machine】Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures.
  • 【IGBT inverter & 2T 4T Function】: Hitbox CT520 inve....
Check Stock

SPRIGHOLLY plasma cutter 50A Dual Voltage 110V/220V Compact Metal Cutter 1/2\ Quality cut plasma cutting equipment high frequency CUT50 3 year warranty black IGBT Inverter machine

  • at 110V, 10-50A DC output, 1/3" ideal clean cut and maximum cut 2/5". ( Please note: the thickness of the cut depends on the material).
  • 【Fast cutting in only three steps】Built-in automatic drain air regulator, you only need to connect the air compressor, plug in the power supply and the plasma cutting torch, and you can start working. And there is no need to worry about drainage and regulating gas.Very convenient！.
  • 【Energy Saving & Multi-protection】 The cutting machine adopts IGBT inverter technology, which features with current control, high quality and stable performance, so the energy consumption is also greatly reduced. With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional way..
  • 【Easy Cut】Equipped with advanced AG60 torch to reduce loss and extend service life. With your SPRIGHOLLY Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat,and produces minimal slag. Designed for both demanding industrial and construction work, or home and hobby use. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and siz....
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

WS SL60 SL100 Torch Start Cartridge 9-8213 9-8277 for Thermal Dynamics Cutmaster 38/52/82/102/152 Plasma Cutter Torch Consumables

  • Plasma consumable type : Start Cartridge.
  • The Start Cartridge Reference code : 9-8213 / 9-8277.
  • The Start Cartridge can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Start Cartridge can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8213 Start Cartridge are replacement parts which produced according to the standard size , and not original.
Check Stock

WeldingStop Shield Cap 9-8218 for Thermal Dynamic Cutmaster 52/82/102/152 SL60 SL100 Plasma Cutter Torch Consumables PK-1[Black 9-8218 Level Up]

  • The Shield Cap 9-8218 used for Drag cutting.
  • the Standoff Guide 9-8218 need work with Standoff Guide 9-8281.
  • The Shield Cap can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Plasma Shield Cap can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8218 Shield Cap are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Mophorn 50Amp Plasma Cutter, 110 220V Dual Voltage Plasma Cutting Machine, Max 12MM Thickness Clean Cut, Portable Plasma Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment

  • Powerful Air Plasma Cutter: The Cut-50F plasma cutter can easily cut up to 1/2’’(12.7 mm) metal under maximum output with ultimate portability weighing only 22.7lbs..
  • Compact & Portable: The inverter plasma cutter has a handle and a thoughtful torch design that can provide a sure, comfortable grip, making the whole machine easy to take..
  • High Efficiency & Energy Saving: The cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. The energy-saving can reach up to 50% as well as efficiency is increased by 30%..
  • Dual Voltage: The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed. High cutting speed and cutting smoothly..
  • Wide Application: This plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc..
Check Stock

PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2\ Clean Cut, CUT50D

  • THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use..
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered..
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself..
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and....
Check Stock

SL40 Plasma Torch Electrode 9-0096 fit SL40 Plasma Torch Thermal Dynamics Cutmaster 42 Plasma Cutter Consumables 10pcs

  • Plasma consumable type--SL40 plasma torch Electrode Tip kit, Rated cutting current 40amp plasma tip.
  • SL40 plasma torch consumables Ref code—9-0096 9-0094.
  • The SL40 plasma tip can fit Thermal Dynamics Cutmaster 42 (1-4200，1-4200-7，7-0040) Plasma Cutter SL40 Torch (Ref. Code 7-0040).
  • The 9-0096 9-0094 plasma nozzle can also fit Thermal Dynamics Cutmaster 12+ / Cutmaster 12 Plus (1-4200-4) Plasma Cutter SL40 plasma cutting torch (Ref. Code 7-0040).
  • The plasma tip are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock