Reviews I2c Adc 1bit

AITRIP 12PCS TCA9548A I2C IIC Multiplexer Breakout Board Module 8 Channel Expansion Development Board for Arduino

  • The TCA9548A adapter is connected to an I2C device with multiple identical addresses on the same I2C port on the main control board for normal communication and use.There are 8 I2C interfaces on one expander, and there are eight bidirectional transfer switches that can be controlled by I2C bus. This means that after 1 expander is transferred, 8 identical addresses can be connected to the same I2C port..
  • Expansion board TCA9548A compatible with IIC bus and system management bus (SMBus), active low reset input, support for hot insertion, low standby current, no glitch during power-up, support for voltages between 1.8V, 2.5V, 3.3V and 5V buses Level shifting, TCA9548A I2C IIC multiplexer breakout board depending on the contents of the programmable control registers, any single SCn/SDn channel or combination of channels can be selected..
  • 12pcs TCA9548A I2C IIC Multiplexer Breakout Board 8 Channel Expansion Board for Arduino.
Check Stock

SunFounder Rascam for Raspberry Pi Camera 4B, Compatible with All HQ RPi Camera Lens, Face Recognition, Time Lapse, Countdown Photo, ect DIY Camera

  • 【SunFounder Rascam】This Rascam is designed based on Camera for Raspberry Pi 4B, with a 5 megapixel camera (compatible with all HQ RPi camera lens), 2.4 inch LCD screen and RGB flash, shutter, joystick, power supply for learners to run camera programs..
  • 【Powerful Functions】This Rascam combines many functions in one. Such as Upload to Google Cloud, Samba File Sharing, Face Recognition, Time Lapse, Countdown Photo, DIY Watermark, ect and other DIY functions..
  • 【Well-Crafted Design】Metal case and Multi-layer acrylic structure , features small size, sturdy and lightweight, excellent package. Easily to be carried anywhere. This Rascam with battery hold and 5V charging port can be charged with Mirco usb.(Battery Not Included ).
  • 【DIY Camera】Rascam Hat with 9 expansion ports (2 I/O, 2 ADC, 2 PWM, 2 * I2C and UART ports) can meet your requirements for inserting sensors, some other external devices and allowing DIY the content to display on the 2.4'' screen and using the joystick to DIY the api setting..
  • 【Abundant Examples】This camera kit for Raspberry Pi provides 11 great examples for building Rascam, such as add Filters, Time Lapse, Samba File Sharing, etc and quick-responding technical support which makes it easily to set up..
Check Stock

SEN01114 SEN01114 Furnace Flame Sensor Replacement Part for Trane American Standard Furnace - Replaces SEN0491 SEN00491 Stainless

  • ✅【PART Description】SEN01114 Furnace Flame Sensor, Designed to detect the flame safely. When the sensor does not detect the flame gas valve is....
  • ✅【PERFECT REPLACeMENT】The SEN01114 American Standard Trane Furnace Flame Sensor replaces part numbers: B340888P01, PSE712, SEN0441, SEN441,....
  • ✅【Premium Quality】This after-market replacement part is made from durable high quality material and well-tested by manufacturer.Absolutely meet....
  • ✅【COMPATIBLE WITH】ADC1B040A9241AA ADC1B040A9241AB ADC1B040A9241AC ADC1B040A9241AD ADC1B060A9361AA ADC1B060A9361AB ADC1B060A9361AC....
  • ✅【SHOP WITH CONFIDENCE】LUXRILIX is devoted ourselves to provide our customer with quality product and excellent service at a reasonable price,....
Check Stock

Khadas Single Board Computer, VIM3 Basic Amlogic A311D,Faster CPU,Neural Processing Unit for A.I.Switchable PCIe and USB 3.0,Dual Independent Displays,Dual Cameras(2+16GB)

  • High Performance: Amlogic A311D - x4 2.2Ghz Cortex A73, x2 1.8Ghz Cortex A53 12nm SoC fabrication process for low heat 2T2R AC Wi-Fi with RSDB Features Bluetooth 5.0 USB 3.0 Available Gigabit Ethernet with WOL support LPDDR4/X USB-C PD for heavy applications.
  • Neural Network Accelerator: NPU: Supports a maximum frequency of 800MHz at 5.0 TOPS INT8 inference up to 1536 MAC Internal L2 cache (512KB) and system workspace buffer (1MB) Supports all major deep learning frameworks including TensorFlow and Caffe.
  • Maker Friendly: Stackable Design Programmable MCU 3 Programmable LEDs (Blue, Red and White) XPWR for external Power button Onboard SPI Flash Khadas TST Khadas KBI.
  • Business Applications Dual independent displays with GSensor H.264 / H.265 Encoding Supports multi-video decoding up to 4Kx2K@60fps+1x1080P@60fps VIN Power Input.
  • Rich IO: 40 Pin GPIO Header (USB, I2C, I2S, UART, ADC etc) 8-ch I2S for Microphone Array application (over M.2 Connector) MIPI-DSI MIPI-CSI Designed with GPIO Extender Chip.
Check Stock

Khadas Single Board Computer, VIM3 Pro Amlogic A311D,Faster CPU,Neural Processing Unit for A.I.Switchable PCIe and USB 3.0,Dual Independent Displays,Dual Cameras (4+32GB)

  • High Performance: Amlogic A311D - x4 2.2Ghz Cortex A73, x2 1.8Ghz Cortex A53 12nm SoC fabrication process for low heat 2T2R AC Wi-Fi with RSDB Features Bluetooth 5.0 USB 3.0 Available Gigabit Ethernet with WOL support LPDDR4/X USB-C PD for heavy applications.
  • Neural Network Accelerator: NPU: Supports a maximum frequency of 800MHz at 5.0 TOPS INT8 inference up to 1536 MAC Internal L2 cache (512KB) and system workspace buffer (1MB) Supports all major deep learning frameworks including TensorFlow and Caffe.
  • Maker Friendly: Stackable Design Programmable MCU 3 Programmable LEDs (Blue, Red and White) XPWR for external Power button Onboard SPI Flash Khadas TST Khadas KBI.
  • Business Applications Dual independent displays with GSensor H.264 / H.265 Encoding Supports multi-video decoding up to 4Kx2K@60fps+1x1080P@60fps VIN Power Input.
  • Rich IO: 40 Pin GPIO Header (USB, I2C, I2S, UART, ADC etc) 8-ch I2S for Microphone Array application (over M.2 Connector) MIPI-DSI MIPI-CSI Designed with GPIO Extender Chip.
Check Stock

SparkFun Digital Temperature Sensor - TMP102 (Qwiic)-Compatible with Arduino and other Single-board computers Easy-to-Use I2C sensor Plug-and-Play breakout board Runs from 1.4-3.6V input Use with 3.3V

  • Uses the I2C interface. I2C Address: 0x48 by default (Three additional addresses available, as well). 12-bit, 0.0625°C resolution. Typical temperature accuracy of ±0.5°C.
  • 3.3V sensor. Supports up to four TMP102 sensors on the I2C bus at a time. 2x Qwiic Connectors.
  • The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V..
  • I2C communication uses an open drain signaling, so there is no need to use level shifting..
  • The alert pin is an over temperature alert, which has an open-drain and is pulled up through a 10kΩ resistor. The alert can also be read over I2C.
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock

ACEIRMC 3pcs IIC I2C TWI Serial LCD 2004 20x4 Display Screen Blue + IIC I2C Module Interface Adapter for Raspberry Pi Arduino (Blue)

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.
  • LCD2004+I2C 2004 20x4 2004A Blue/Green screen HD44780 Character LCD /w IIC/I2C Serial Interface Adapter Module for arduino.
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as for Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
  • please check which chip you have on i2c interface. (Before you upload the code to the control board, please download the LiquidCrystal_I2C library).
Check Stock

2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V - 5V

  • What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight.
  • Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power.
  • Operating temperature: -40 - 85 degree....
  • Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock