Reviews I2c Cable

4Pcs INA219 I2C Bi-Directional DC Current Power Supply Sensor Breakout Board Module I2C IIC Interface

  • INA219 module is an I2C interface with a drift, bi-directional current / power monitor integrated circuit (IC), and further expand the energy-saving....
  • INA219 I2C Bi-directional DC Current Power Supply Sensor, Working Voltage 3~5V.
  • INA219 module small size, low cost, high accuracy. It not only can monitor the voltage drop across a shunt resistor on the sensing shunt supply....
  • INA219 can be achieved within the maximum error accuracy of +1% from -40° C to 85° C temperature range, the maximum offset is 100 uV. The....
  • Appliaction:The module is used for I2C port zero drift / bidirectional current / power monitoring sensor module. The device is available in a SOT23....
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier

  • Provides 16-bit precision at 860 samples/second over I2C.
  • Can be configured as 4 single-ended input channels, or two differential channels.
  • Up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs possible.
Check Stock

GeeekPi 2Pack LCD 2004 Module with I2C Interface Adapter Blue Backlight 2004 20x4 LCD Module Shield for Raspberry Pi Arduino Uno

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures..
  • The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus..
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
Check Stock

HiLetgo 2pcs 5V 2004 1602 LCD Display IIC I2C Adapter IIC Serial Interface Adapter for Arduino Robort Parts

Check Stock

Adafruit LIS3DH Triple-Axis Accelerometer +-2g/4g/8g/16g [ADA2809]

  • Three axis sensing, 10-bit precision with �2g/�4g/�8g/�16g selectable scaling.
  • Both I2C (2 possible addresses) and SPI interface option.
  • Plus 3 additional ADC inputs you can read over I2C.
  • Tap, Double-tap, orientation & freefall detection.
Check Stock

Obstacle Avoidance Sensor TCRT5000 IR Infrared Reflective Sensor Line Detect Tracking for Arduino Robot Smart Car (Pack of 10)

  • APDS-9960 APDS9960 RGB Gesture Sensor Module.
Check Stock

GPD Win 2 [256GB M.2 SSD Storage] Mini Handheld Windows 10 Video Game Console Gameplayer 6

  • Built-in Wi-Fi B/G/N, Bluetooth 4.0 One USB host with type-A receptacle, one USB On-The-Go port Composite video and stereo audio port via mini TRRS Optional composite TRRS to RCA audio-video cable Optional VGA adapter and HDMI adapter (see Hardware extensions below) Open source hardware[15] and open source software[16] Up to 45 GPIO ports[17] Supports 1-Wire and I2C protocols, PWM output Serial console and Ethernet via USB for quick headless operation[18] Power options include 5V via USB OTG, 5V.
Check Stock

SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic) High-Precision Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix

  • Capable of 10mm, three-dimensional accuracy and both rover and base station operations.
  • Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz.
  • USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.
  • Compatible with Arduino library shows how to read latitude, longitude, heading and speed over I2C without the need for constant serial polling. Time to First Fix: 25s (cold), 2s (hot).
  • Note: This is the GPS board only. It does not come with cables or microcontroller..
Check Stock