Reviews High speed Steel Spiral Drill Bit

Auger Drill Bits for Planting - Garden Spiral Bit set bedding plants, bulbs, digging umbrella and Ice holes Save your back time with our post digger 3×12” + 1.5×9” by Jardilex, 3”×12” and 1.5”×9”

  • ...t the auger bit into the chuck of a drill, make sure the device is set on a low speed, and make a neat hole in the soil within seconds. The set includes 10 waterproof plant labels (2.7” × 2”) made of yellow plastic and a permanent marker: keep track of what you plant!.
  • MANY POSSIBLE APPLICATIONS! A garden auger spiral drill bit is primarily to make holes in the soil for bulbs, potted plants, seedlings, flowers, and even bareroot trees and shrubs, but it’s not the only thing a post hole digger is good for. It can mix soils, fertilizers, paint, or building materials. Drill holes for fence posts, in the ice for ice fishing, in the sand on a beach for your portable parasol. It’s more than a garden auger spiral drill bit for planting!.
  • EFFECTIVE AND PROFESSIONAL ! Instead of buying a whole professional garden bulb planter (those can be rather pricey), get these garden spiral hole drill bits that fits any 3/8″ or larger chucked drill, 18V or greater drill recommended. Plant hundreds or just a few bulbs in minutes, and improve your planting job !.
  • PREMIUM MATERIALS FOR DURABILITY AND BETTER DRILLING! The auger drill bits for planting are made of hardened SPHC steel and are powder-coated against corrosion. These bulb planter will work even on harder ....
Check Stock

Yin Yoga: The Foundations of a Quiet Practice

  • [SIZE] – 1mm diameter, 11mm length twist drill bit with 0.7mm shank..
  • [MATERIAL] – Diamond coated high speed steel(HSS) is made by spiral technology, has both toughness and hardness, is not easy to break. The drill bit is sharp, and is easy for chip removal..
  • [APPLICABLE MACHINE] – Widely used in rotary tool such as hand drills, drill press, flex shafts, bench drill and hanging mill..
  • [APPLICATION] – Suitable for drilling small holes on glass, soft metal, sea shells, jade, pearls, drywall and son on..
  • [NOTICE] – When drilling, it is necessary to add cutting fluid in time to lubricate and cool down, which can get a better drilling hole wall, extends the service life and drilling accuracy..
Check Stock

uxcell Tap & Bit Sets M11 x 1.5 H2 Straight Flute Machine Thread Milling Tap 9.5mm M35 Cobalt High Speed Steel HSS-CO Twist Drill Bit

  • Tap & Bit Sets: Tap size: thread size: M11 x 1.5.
  • total length: 85mm / 3.35". Drill bit size: cutting edge diameter: 9.5mm / 0.374".
  • Thread Tap: Straight flute design, downward chip removal, fast tapping with accuracy. Suitable for processing through holes or shallow holes. For tapping aluminum, die steel, stainless steel, bronze, hard plastics. Provides high hardness and toughness for wear resistance..
  • Drill Bit: Spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting and no glitches. M35 5% cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance..
  • Usage of Tap: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
  • Tips of Drill Bit: Suitable lubricant is conducive to cutting or cooling, making cutting easier, improving smoothness and dimensional accuracy. Select an appropriate feed rate and cutting speed to improve the tool life..
Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
  • 【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
  • 【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
  • 【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.
Check Stock

AKM Screw Extractor with Drill Bit Set,bolt extractors,Multi-spline Extractors,and Left Hand Drill Bits for Removeing Broken Studs, Bolts, Socket Screws, and Fittings| SAE

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our AKM screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16",....
Check Stock

Drillco 3500 Series High-Speed Steel Center Countersink, Uncoated (Bright) Finish, 3/16\ Body Diameter, 60 Degrees Angle, 2\ Size

  • ¡¾THREE?DIMENSIONAL TRIANGULAR¡¿-The drill shank cuts the three?dimensional triangular, so that the electric drill clamping is more tight and the drilling does not slip.
  • ¡¾HSS MATERIAL¡¿-High quality high speed steel material, strong toughness, wear resistance.
  • ¡¾CONVENIENT TO USE¡¿-U?shaped spiral grooves, conducive to drilling more smoothly, convenient to use.
  • ¡¾WIDELY USED¡¿-Widely used in glass, ceramic tile, plastic, wood and other materials drilling.
  • ¡¾5PCS DRILL BIT¡¿-Including 5pcs drill bit of the package, meeting your different needs.
Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

  • Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
  • Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
  • Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
  • Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
  • Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
  • Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..
Check Stock

uxcell Cemented Carbide Twist Drill Bits 8.5mm Metal Drill Cutter for Stainless Steel Copper Aluminum Zinc Alloy Iron 6 Pcs

  • Cemented Carbide Tip: 8.5mm twist drill bits are made of cemented carbide tip for long service life, more sharp and durable than others.
  • Features: Milled U-flutes with deep-cut spiral delivers fast material removal. Suitable for drilling in tough metal, including heavy-duty abrasive alloy and hardened steel.
  • Use For: Drilling clean, accurate holes in sheet metal, steel, copper, brass, aluminum, plastic, wood, stainless steel and cast iron.
  • Use Note: Please use low speed when drilling and note the temperature of carbide tip is not too high for extending drill bit life.
  • Round Shank Design: Round shank twist drill bit can work with a electric drill (Excluding in the item)..
Check Stock

QISF 16Pcs Brad Point Wood Drill Bit 3/4/5/6/8/10/12mm Wood Working Drill with 3-12MM Center Point and Stopper Perfect for Woodworking Carpentry Drilling

  • 【Brad Point Drill Bit Set】--- Made of top-class carbon steel with high temperature forging-quenching technology for wear resistance and long service time.
  • Brad point design for positioning quickly, avoiding to offset the location, accurate alignment and high drilling speed when working. Special spiral design prevents jamming and ensures quick chip removal..
  • 【Depth Stop Collars】---7PCS M3/4/5/6/8/10/12 Depth stop collars locator made of carbon steel with hardness, wear resistance and corrosion-resistance. Single hole design can lock the drill bit stably, avoiding to deviate when drilling. Coming with hex key for removal and installation quickly..
  • 【Package Content】--- The item contains 7 Pcs Brad Point Drill(3/4/5/6/8/10/12mm).
  • 7 Pcs Depth Stop Collars (3/4/5/6/8/10/12/mm).
  • 1 Pcs Hex Key（with transparent plastic box ）-- Total 15Pcs/Pack.
Check Stock