Reviews Gpu Support Bracket Amazon

CableMod Vertical PCI-e Bracket Black HDMI + DisplayPort

  • Heavy duty bracket to vertically show off GPU and water cooler. Compatible with most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX....
  • Newly revised PCIe 4.0. No BSOD, or WUE / WHEA Error free. ***Compatible with GPU - RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 / Chipset -....
  • Some cases may have mis-align screw holes and may cause the GPU to be off alignment when installed, causing damage to the GPU and the system. Please....
  • Over 64GB/s (bi-directional) true PCIe 4.0 performance riser via rare shielded extreme high-speed wires and dedicated power lines for lossless signals....
Check Stock

Michal Tech Mining GPU Hanger Frame for Wire Rack Pack of 2 (2 Pack)

  • PROFESSIONAL VARIATION – Heat resistant for complete open air system and for enclosed systems!.
  • SIMPLE and CONVENIENT – Compatible with almost all wire racks.
  • EASY TO INSTALL – This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on a mining frame. For installation steps, please refer to the user manual..
  • Full kit includes set of 2 screws and 2 hangers..
  • NOTICE – GPU’s with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU, GPU, PSU, Motherboards, Cables, etc.. If you are not 100% happy with this product, please feel free to contact us, we will offer you a satisfactory solution within 24 hours..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
Check Stock

Thermaltake View 71 RGB 4-Sided Tempered Glass Vertical GPU Modular E-ATX Gaming Full Tower Computer Case CA-1I7-00F1WN-01

  • 4 SIDED GLASS VIEWING PROTECTION: 5mm thick tempered glass panels spaced from the chassis for optimal airflow.
  • Top, Front, and Swing Door Design on Left and Right.
  • 3 WAY RADIATOR VIEW : Supporting 3 way radiator fitments.
  • Top, Front or Vertical View mounting on Motherboard Tray.
  • VERTICAL GPU: Includes GPU Float bracket allows vertical mounting options for 2.5 slot GPU solutions.
  • COOL WITH RGB 3 Riing 14 RGB LED Fans (140mm) providing excellent cooling performance with RGB lighting.
  • SUPPORT UP TO 10 HDD 2.5 inches/3.5 inches x 4 with HDD Rack + 3.5 inches x 3 / 2.5 inches x 6 behind M/B Tray.
  • Supports Mini ITX, Micro ATX, ATX, and E ATX Motherboard.
  • I/O PORT USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1.
  • OUTSTANDING EXPANSION Max CPU Cooler Height 190mm / Max VGA Length 310mm (With HDD Rack) 410mm (Without HDD Rack) / Max PSU Length 220mm (Without Bottom Fan).
  • DIMENSION 23.3 inches x 10.8 inches x 22.7 inches / 42.1 pounds.
Check Stock

upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05(not Support 3080 ti)

  • Simple and Convenient adjustment method.Compatible with almost motherboards and cases..
  • Sturdy GPU Stand Bracket Kit.Prevents GPUs from bending and sagging after long period of use..
  • Contains two kinds of sliding rubber pads,suitable for different cooling fan spacing of GPU..
  • Low-key matt black aesthetic that improves the look of your PC.Low profile for single or dual setups..
  • Showing the details of the workmanship. It is a small graphics card support stand with three complex production process..
Check Stock

upHere GS05ARGB Addressable RGB Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket,Built-in ARGB Strip,Adjustable Length and Height Support

  • Simple and Convenient adjustment method.Compatible with almost motherboards and cases..
  • Sturdy GPU Stand Bracket Kit.Prevents GPUs from bending and sagging after long period of use..
  • Contains two kinds of sliding rubber pads,suitable for different cooling fan spacing of GPU..
  • Low-key matt black aesthetic that improves the look of your PC.Low profile for single or dual setups..
  • Showing the details of the workmanship. It is a small graphics card support stand with three complex production process..
Check Stock

Phanteks (PH-EC360ATG_DBK02) Eclipse G360A Ultra-fine Performance Mesh, Mid-Tower Gaming case, Tempered Glass, Digital-RGB Lighting, Black

  • High performance front panel with Ultra-fine Performance Mesh that combines high airflow performance and excellent dust filtrations..
  • Integrated D-RGB lighting that is easy to control and can be expanded and/or synced to a D-RGB equipped motherboard..
  • Three 120mm D-RGB fans and an integrated D-RGB LED strip is included. Storage support with 3x dedicated SSD locations (2 included) and 2x toolless HDD brackets..
  • Ready for high-end gaming systems with 360 radiator cooling support in front or top, full-length GPUs and vertical GPU ready with the optional Vertical GPU Bracket..
  • Easily accessible front I/O featuring 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB Color and Mode buttons..
Check Stock

Rosewill Zircon I ATX Mid Tower Gaming PC Computer Case with Tempered Glass, Pre-Installed RGB Fan with 10 Backlit Modes and LED Light Strips, 240mm AIO and 350mm VGA Support, Bottom Mount PSU

  • Sleek and vibrant with 1 pre-installed double ring RGB case fan capable of 10 LED modes conveniently hardware-controlled via top panel LED button.
  • 7 static colors, 2 effects and 1 rainbow RGB mode, plus 2 embedded RGB LED light strips.
  • Expansive capacity and roomy layout with 7 expansion slots.
  • supports optional vertical mount GPU with support bracket and optional 350mm horizontal GPU clearance.
  • Massive upgrade potential with support for optional 360mm radiator in front, optional 240mm radiator on top, optional 120mm radiator in rear, optional 170mm CPU cooler, optional 220mm PSU and ATX/microATX/Mini-ITX motherboard compatibility.
Check Stock

EZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

  • The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud..
  • The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud.
  • The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm. Only support PCIE3.0.
  • Before buying, please confirm whether there is enough space inside the chassis to install.
  • For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling.
Check Stock