Reviews Gpu Mining Ebooks

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

  • 【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
  • 【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
  • 【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....
Check Stock

FebSmart GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, GPU Extension Cable, PCIE Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C PCIE Riser, VER006C GPU Riser (Black-6PCS)

  • 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 GPU riser. The GPU riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
  • 2. This GPU riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
  • 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on GPU Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
  • 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..
Check Stock

FrSky Access 900MHz Long Range R9 Mini-OTA Receiver

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure....
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over....
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales....
Check Stock

PCIe Riser Powered Adapter Card 1X to 16X, PCI-E GPU Risers 8 Capacitors for Bitcoin Litecoin ETH Coin Mining with Led Graphics Extension +60cmUSB 3.0 Cable and 6-Pin SATA Power Cable (VER009s-6Pack)

  • ... the PCI Express X16 slot ensure stable GPU connection. What's more, it can extend the mother board PCIE X1 slot to PCIE X16 slot and will provide more safer and reliable connectivity with more PCIE X16 graphic cards..
  • 【Strong Stability for You】 The 009s gpu riser come with 24 inches USB 3.0 pcie extension cable mining.The PCI-E connector uses multi-layer shielded wire, which can be connected up to 300cm without signal attenuation. Equipped 15Pin SATA to Molex 6Pin power cable that can provide adequate current for Ethereum Mining rigs and GPU Mining rigs..
  • 【8 Capacitors, More Safer】This high quality pcie riser splitter mining is equipped with 8 upgraded FP solid capacitors which make the graphics card power supply more safer and stable. It is excellent choice for mining rigs..
  • 【Support System】: Compatible with all WINDOWS systems, LINUX, MAC.--Plug and play, no driver needed to install. (Bonus: 6*pcie riser adapter cards, 6*PCI-E 1x Golden Fingers , 6*60cm USB 3.0 cables, 6*6Pin to15Pin SATA power cables.）.
  • 【Reliable Support】 Buy with 90 days warranty. PCI-Express GPU riser kits have been tested for functionality and durability by the third parties before sent it to you. If you have any questions, please feel free to contact us, we will....
Check Stock

Michal Tech Hobby Mining GPU Hanger for Wire Rack Pack of 6

  • HOBBY VARIATION - Heat resistant for complete open air system only. High heat tolerant variation for enclosed systems NOW FOR SALE: PROFESSIONAL GPU....
  • SIMPLE and CONVENIENT - Compatible with almost all wire racks.
  • EASY TO INSTALL - This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on....
  • Full kit includes set of 6 screws and 6 hangers..
  • NOTICE - GPU's with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU,....
Check Stock

WiFi Card,Ubit Three-Band 3000Mbps WiFi 6 AX3000 PCIe WiFi Card with Bluetooth 5.2, Wireless Adapter with MU-MIMO,OFDMA,Ultra-Low Latency, Supports Windows 10/11 (64bit) only

  • More Power Options: MOLEX, SATA and Graphic card 6PIN interface, three interface optional. Reducing the burden on the connection between the motherboard and graphics cards. Compatible with all power supply ports.whether small open air rigs or large rack based miners, and securing your investment. The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin)..
  • 【Anti-interference metal shell】PCI Express risers extend the mother board PCIE X1 slot to PCIE X16 slot. Provding a safe and reliable connectivity with more PCIE X16 graphic cards. Used on Ethereum Mining rigs or GPU Mining rigs mainly. X16 GPU slot come with Anti-interference metal shell make sure data transmission..
  • Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity..
  • 5X high quality capacitors GPU RISER, The appropriate number of capacitors results in less electrical fluctuations without increasing power consumption, meaning more stable currents transient- the loads and heat losses spread across multiple cap which will prolong their life, better protect your device away from over current, heat and voltage..
  • Mini design, space saving, give your mining equipment more space for heat dissipation..
Check Stock

Michal Tech Mining GPU Hanger Frame for Wire Rack Pack of 2 (2 Pack)

  • PROFESSIONAL VARIATION – Heat resistant for complete open air system and for enclosed systems!.
  • SIMPLE and CONVENIENT – Compatible with almost all wire racks.
  • EASY TO INSTALL – This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on a mining frame. For installation steps, please refer to the user manual..
  • Full kit includes set of 2 screws and 2 hangers..
  • NOTICE – GPU’s with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU, GPU, PSU, Motherboards, Cables, etc.. If you are not 100% happy with this product, please feel free to contact us, we will offer you a satisfactory solution within 24 hours..
Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

  • ...Can not be used at household voltage of 110V） The number of revolutions is as high as 7000 rpm per minute so the heat dissipation effect is good. The power efficiency is about 90%. Please reserve about 300W for the motherboard, fan, and other wire consumption..
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is 2000W, and the output power=2000*90%. So we recommend to run 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously, run max 5 PCS 3090, run max 6PCS 3080 without overclocking. Note: GPUs longer than 32 cm in length are unavailable. We don’t recommended to mix various types of GPUs..
  • 【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
  • 【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
Check Stock

PCIe Riser Card Latest Adapter 6-Pin 1x to 16x For Mining GPU Riser Adapter Flexibility Extension Cable 6-Pin PCI-E to SATA Power Cable For Bitcoin & Crypto Mining Ethereum Mining ETH

  • ✅ HIGH QUALITY - Get the best quality out of your mining rig. This top-of-the-line solution for setting up crypto mining rigs. This express usb 3 riser kit supports multi gpu.
  • ✅STABILITY - 4 High performance capacitors and one stabilivolt to make the power delivery more stable, giving your gpu the support it needs to run efficiently.
  • ✅LONG SIFESPAN - With the use of gold plated contactors, this makes it ensure durability and flawless connectivity. Sata to usb cable bitcoin miner and altcoin mining.
  • ✅COMPATIBILITY - This riser kit is compatible with 1x, 4x, and 8x, 16x PCI-E slot of the motherboard, dedicated for alt coin mining. Compatible with wide range of GPU.
  • ✅CUSTOMER SUPPORT - We guarantee your satisfaction or your money back. If there are ever any issues with your expectations of this product please reach out to us directly and we will be sure to fix any concerns you may have.
Check Stock